[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0e006cc0-2760-195a-35b9-0a2f6e8452c5@quicinc.com>
Date: Tue, 15 Feb 2022 15:10:58 +0530
From: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
To: Steev Klimaszewski <steev@...i.org>,
Pavan Kondeti <quic_pkondeti@...cinc.com>
CC: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Felipe Balbi <balbi@...nel.org>,
Stephen Boyd <swboyd@...omium.org>,
Doug Anderson <dianders@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
Mathias Nyman <mathias.nyman@...el.com>,
<linux-arm-msm@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <quic_ppratap@...cinc.com>
Subject: Re: [PATCH v10 6/6] usb: dwc3: qcom: Enable the interrupts during
probe
Hi Steev,
On 1/28/2022 2:06 PM, Steev Klimaszewski wrote:
> Hi Sandeep,
>
> On 1/25/22 3:17 AM, Sandeep Maheswaram wrote:
>> Hi Steev,
>>
>>> I didn't face any such issue with devices connected.
>>>
>>> I think this is because I used IRQ_TYPE_EDGE_BOTH in device tree and
>>> Steev has IRQ_TYPE_LEVEL_HIGH in his device tree.
>>>
>>> When i changed to IRQ_TYPE_LEVEL_HIGH I also observed a storm of
>>> interrupts in my device though it booted .
>>>
>>> Regards
>>>
>>> Sandeep
>>>
>> Can you try with IRQ_TYPE_EDGE_BOTH in your device tree and see if
>> you are getting the issue.
>>
>> Regards
>>
>> Sandeep
>>
> I just tested here, changing both of the IRQ_TYPE_LEVEL_HIGH in the
> yoga's dts to EDGE_BOTH and I still do not get a booting system.
>
> -- Steev
>
Please let us know what devices are connected to your setup and share
the device tree file you are using.
Please share the failure logs also,
Regards
Sandeep
Powered by blists - more mailing lists