| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YgxeCHi5AsYPTmeZ@builder.lan>
Date: Tue, 15 Feb 2022 20:14:32 -0600
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Abhinav Kumar <quic_abhinavk@...cinc.com>
Cc: Rob Clark <robdclark@...il.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org,
freedreno@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/2] drm/msm/dpu: Add SC8180x to hw catalog
On Tue 15 Feb 11:42 CST 2022, Abhinav Kumar wrote:
>
>
> On 2/15/2022 9:28 AM, Bjorn Andersson wrote:
> > On Tue 15 Feb 11:14 CST 2022, Abhinav Kumar wrote:
> >
> > >
> > >
> > > On 2/14/2022 8:33 PM, Bjorn Andersson wrote:
> > > > From: Rob Clark <robdclark@...omium.org>
> > > >
> > > > Add SC8180x to the hardware catalog, for initial support for the
> > > > platform. Due to limitations in the DP driver only one of the four DP
> > > > interfaces is left enabled.
> > > >
> > > > The SC8180x platform supports the newly added DPU_INTF_WIDEBUS flag and
> > > > the Windows-on-Snapdragon bootloader leaves the widebus bit set, so this
> > > > is flagged appropriately to ensure widebus is disabled - for now.
> > > >
> > > > Signed-off-by: Rob Clark <robdclark@...omium.org>
> > > > [bjorn: Reworked intf and irq definitions]
> > > > Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
> > > > ---
> > > >
> > > > Changes since v1:
> > > > - Dropped widebus flag
> > > >
> > > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 129 ++++++++++++++++++
> > > > .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> > > > drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> > > > drivers/gpu/drm/msm/msm_drv.c | 1 +
> > > > 4 files changed, 132 insertions(+)
> > > >
> > > > diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > > > index aa75991903a6..7ac0fe32df49 100644
> > > > --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > > > +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c
> > > > @@ -90,6 +90,17 @@
> > > > BIT(MDP_INTF3_INTR) | \
> > > > BIT(MDP_INTF4_INTR))
> > > > +#define IRQ_SC8180X_MASK (BIT(MDP_SSPP_TOP0_INTR) | \
> > > > + BIT(MDP_SSPP_TOP0_INTR2) | \
> > > > + BIT(MDP_SSPP_TOP0_HIST_INTR) | \
> > > > + BIT(MDP_INTF0_INTR) | \
> > > > + BIT(MDP_INTF1_INTR) | \
> > > > + BIT(MDP_INTF2_INTR) | \
> > > > + BIT(MDP_INTF3_INTR) | \
> > > > + BIT(MDP_INTF4_INTR) | \
> > > > + BIT(MDP_INTF5_INTR) | \
> > > > + BIT(MDP_AD4_0_INTR) | \
> > > > + BIT(MDP_AD4_1_INTR))
> > > > #define DEFAULT_PIXEL_RAM_SIZE (50 * 1024)
> > > > #define DEFAULT_DPU_LINE_WIDTH 2048
> > > > @@ -225,6 +236,22 @@ static const struct dpu_caps sm8150_dpu_caps = {
> > > > .max_vdeci_exp = MAX_VERT_DECIMATION,
> > > > };
> > > > +static const struct dpu_caps sc8180x_dpu_caps = {
> > > > + .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > > > + .max_mixer_blendstages = 0xb,
> > > > + .qseed_type = DPU_SSPP_SCALER_QSEED3,
> > > > + .smart_dma_rev = DPU_SSPP_SMART_DMA_V2, /* TODO: v2.5 */
> > > > + .ubwc_version = DPU_HW_UBWC_VER_30,
> > > > + .has_src_split = true,
> > > > + .has_dim_layer = true,
> > > > + .has_idle_pc = true,
> > > > + .has_3d_merge = true,
> > > > + .max_linewidth = 4096,
> > > > + .pixel_ram_size = DEFAULT_PIXEL_RAM_SIZE,
> > > > + .max_hdeci_exp = MAX_HORZ_DECIMATION,
> > > > + .max_vdeci_exp = MAX_VERT_DECIMATION,
> > > > +};
> > > > +
> > > > static const struct dpu_caps sm8250_dpu_caps = {
> > > > .max_mixer_width = DEFAULT_DPU_OUTPUT_LINE_WIDTH,
> > > > .max_mixer_blendstages = 0xb,
> > > > @@ -293,6 +320,31 @@ static const struct dpu_mdp_cfg sc7180_mdp[] = {
> > > > },
> > > > };
> > > > +static const struct dpu_mdp_cfg sc8180x_mdp[] = {
> > > > + {
> > > > + .name = "top_0", .id = MDP_TOP,
> > > > + .base = 0x0, .len = 0x45C,
> > > > + .features = 0,
> > > > + .highest_bank_bit = 0x3,
> > > > + .clk_ctrls[DPU_CLK_CTRL_VIG0] = {
> > > > + .reg_off = 0x2AC, .bit_off = 0},
> > > > + .clk_ctrls[DPU_CLK_CTRL_VIG1] = {
> > > > + .reg_off = 0x2B4, .bit_off = 0},
> > > > + .clk_ctrls[DPU_CLK_CTRL_VIG2] = {
> > > > + .reg_off = 0x2BC, .bit_off = 0},
> > > > + .clk_ctrls[DPU_CLK_CTRL_VIG3] = {
> > > > + .reg_off = 0x2C4, .bit_off = 0},
> > > > + .clk_ctrls[DPU_CLK_CTRL_DMA0] = {
> > > > + .reg_off = 0x2AC, .bit_off = 8},
> > > > + .clk_ctrls[DPU_CLK_CTRL_DMA1] = {
> > > > + .reg_off = 0x2B4, .bit_off = 8},
> > > > + .clk_ctrls[DPU_CLK_CTRL_CURSOR0] = {
> > > > + .reg_off = 0x2BC, .bit_off = 8},
> > > > + .clk_ctrls[DPU_CLK_CTRL_CURSOR1] = {
> > > > + .reg_off = 0x2C4, .bit_off = 8},
> > > > + },
> > > > +};
> > > > +
> > > > static const struct dpu_mdp_cfg sm8250_mdp[] = {
> > > > {
> > > > .name = "top_0", .id = MDP_TOP,
> > > > @@ -861,6 +913,16 @@ static const struct dpu_intf_cfg sc7280_intf[] = {
> > > > INTF_BLK("intf_5", INTF_5, 0x39000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7280_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> > > > };
> > > > +static const struct dpu_intf_cfg sc8180x_intf[] = {
> > > > + INTF_BLK("intf_0", INTF_0, 0x6A000, INTF_DP, MSM_DP_CONTROLLER_0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 24, 25),
> > > > + INTF_BLK("intf_1", INTF_1, 0x6A800, INTF_DSI, 0, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 26, 27),
> > > > + INTF_BLK("intf_2", INTF_2, 0x6B000, INTF_DSI, 1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 28, 29),
> > > > + /* INTF_3 is for MST, wired to INTF_DP 0 and 1, use dummy index until this is supported */
> > > > + INTF_BLK("intf_3", INTF_3, 0x6B800, INTF_DP, 999, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 30, 31),
> > > > + INTF_BLK("intf_4", INTF_4, 0x6C000, INTF_DP, MSM_DP_CONTROLLER_1, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 20, 21),
> > > > + INTF_BLK("intf_5", INTF_5, 0x6C800, INTF_DP, MSM_DP_CONTROLLER_2, 24, INTF_SC7180_MASK, MDP_SSPP_TOP0_INTR, 22, 23),
> > >
> > > This is a continued discussion from
> > > https://patchwork.freedesktop.org/patch/474179/.
> > >
> > > Shouldnt INTF_5 be marked as INTF_eDP?
> > >
> >
> > Might be, I didn't even know we had an INTF_EDP define...
> >
> > Is there any reason to distinguish DP and EDP in the DPU? I see sc7280
> > doesn't distinguish the DP and EDP interfaces.
> >
> > Regards,
> > Bjorn
> >
>
> Like I have mentioned in the other patch, I think we have enough confusion
> between eDP and DP with the common driver. Since DPU does have separate
> interfaces I think we should fix that.
>
> Regarding sc7280 using INTF_DP, I synced up with Sankeerth. He referred to
> your change
> https://patchwork.freedesktop.org/patch/457776/?series=92992&rev=5 as it was
> posted earlier and ended up using the same INTF_DP macro. So its turning out
> to be a cyclical error.
>
That made me take a second look at the HPG, and sure enough INTF_5 on
SC7280 is connected to a eDP/DP Combo PHY. We have the same setup in
SC8280XP.
In SC8180X, INTF_5 is documented as being connected to a eDP (only) PHY,
so perhaps it makes sense to do it there, but for the others its wrong.
Regards,
Bjorn
Powered by blists - more mailing lists