lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 16 Feb 2022 12:55:47 +0000
From:   <Conor.Dooley@...rochip.com>
To:     <i.bornyakov@...rotek.ru>
CC:     <mdf@...nel.org>, <hao.wu@...el.com>, <yilun.xu@...el.com>,
        <trix@...hat.com>, <linux-kernel@...r.kernel.org>,
        <linux-fpga@...r.kernel.org>, <system@...rotek.ru>
Subject: Re: [PATCH v2] fpga: microsemi-spi: add Microsemi FPGA manager



On 15/02/2022 11:58, Ivan Bornyakov wrote:
> Add support to the FPGA manager for programming Microsemi Polarfire
> FPGAs over slave SPI interface.
> 
> Signed-off-by: Ivan Bornyakov <i.bornyakov@...rotek.ru>
> ---
> Changelog:
>    v1 -> v2: fix printk formating
> 
>   drivers/fpga/Kconfig         |   9 +
>   drivers/fpga/Makefile        |   1 +
>   drivers/fpga/microsemi-spi.c | 366 +++++++++++++++++++++++++++++++++++
>   3 files changed, 376 insertions(+)
>   create mode 100644 drivers/fpga/microsemi-spi.c
> 
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index 991b3f361ec9..25c2631a387c 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -243,4 +243,13 @@ config FPGA_MGR_VERSAL_FPGA
>   	  configure the programmable logic(PL).
>   
>   	  To compile this as a module, choose M here.
> +
> +config FPGA_MGR_MICROSEMI_SPI
> +	tristate "Microsemi FPGA manager"
> +	depends on SPI
> +	select CRC_CCITT
> +	help
> +	  FPGA manager driver support for Microsemi Polarfire FPGAs
> +	  programming over slave SPI interface.
> +
>   endif # FPGA
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 0bff783d1b61..8b3d818546a6 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -19,6 +19,7 @@ obj-$(CONFIG_FPGA_MGR_XILINX_SPI)	+= xilinx-spi.o
>   obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
>   obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA)	+= zynqmp-fpga.o
>   obj-$(CONFIG_FPGA_MGR_VERSAL_FPGA)      += versal-fpga.o
> +obj-$(CONFIG_FPGA_MGR_MICROSEMI_SPI)	+= microsemi-spi.o
>   obj-$(CONFIG_ALTERA_PR_IP_CORE)         += altera-pr-ip-core.o
>   obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT)    += altera-pr-ip-core-plat.o
>   
> diff --git a/drivers/fpga/microsemi-spi.c b/drivers/fpga/microsemi-spi.c
> new file mode 100644
> index 000000000000..facbc8f600be
> --- /dev/null
> +++ b/drivers/fpga/microsemi-spi.c
> @@ -0,0 +1,366 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Microsemi Polarfire FPGA programming over slave SPI interface.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +#include <linux/of_device.h>
> +#include <linux/fpga/fpga-mgr.h>
> +#include <linux/delay.h>
> +#include <linux/crc-ccitt.h>
> +
> +#define	SPI_ISC_ENABLE		0x0B
> +#define	SPI_ISC_DISABLE		0x0C
> +#define	SPI_READ_STATUS		0x00
> +#define	SPI_READ_DATA		0x01
> +#define	SPI_FRAME_INIT		0xAE
> +#define	SPI_FRAME		0xEE
> +#define	SPI_PRG_MODE		0x01
> +#define	SPI_RELEASE		0x23
> +
> +#define	SPI_FRAME_SIZE	16
> +
> +#define	HEADER_SIZE_OFFSET		24
> +#define	DATA_SIZE_OFFSET		55
> +
> +#define	LOOKUP_TABLE_RECORD_SIZE	9
> +#define	LOOKUP_TABLE_BLOCK_ID_OFFSET	0
> +#define	LOOKUP_TABLE_BLOCK_START_OFFSET	1
> +
> +#define	COMPONENTS_SIZE_ID	5
> +#define	BITSTREAM_ID		8
> +
> +#define	BITS_PER_COMPONENT_SIZE	22
> +
> +#define	STATUS_POLL_TIMEOUT_MS	1000
> +#define	STATUS_BUSY		BIT(0)
> +#define	STATUS_READY		BIT(1)
> +#define	STATUS_SPI_VIOLATION	BIT(2)
> +#define	STATUS_SPI_ERROR	BIT(3)
> +
> +struct microsemi_fpga_priv {
> +	struct spi_device *spi;
> +	bool program_mode;
> +};
> +
> +static enum fpga_mgr_states microsemi_fpga_ops_state(struct fpga_manager *mgr)
> +{
> +	struct microsemi_fpga_priv *priv = mgr->priv;
> +	struct spi_device *spi = priv->spi;
> +	bool program_mode = priv->program_mode;
> +	ssize_t status;
> +
> +	status = spi_w8r8(spi, SPI_READ_STATUS);
> +
> +	if (!program_mode && !status)
> +		return FPGA_MGR_STATE_OPERATING;
> +
> +	return FPGA_MGR_STATE_UNKNOWN;
> +}
> +
> +static int poll_status_not_busy(struct spi_device *spi, u8 mask)
> +{
> +	ssize_t status, timeout = STATUS_POLL_TIMEOUT_MS;
> +
> +	while (timeout--) {
> +		status = spi_w8r8(spi, SPI_READ_STATUS);
> +		if (status < 0)
> +			return status;
> +
> +		if (mask) {
> +			if (!(status & STATUS_BUSY) && (status & mask))
> +				return status;
> +		} else {
> +			if (!(status & STATUS_BUSY))
> +				return status;
> +		}
> +
> +		mdelay(1);
> +	}
> +
> +	return -EBUSY;
> +}
> +
> +static int microsemi_spi_write(struct spi_device *spi, const void *buf,
> +			       size_t buf_size)
> +{
> +	int status = poll_status_not_busy(spi, 0);
> +
> +	if (status < 0)
> +		return status;
> +
> +	return spi_write(spi, buf, buf_size);
> +}
> +
> +static int microsemi_spi_write_then_read(struct spi_device *spi,
> +					 const void *txbuf, size_t txbuf_size,
> +					 void *rxbuf, size_t rxbuf_size)
> +{
> +	const u8 read_command[] = { SPI_READ_DATA };
> +	int ret;
> +
> +	ret = microsemi_spi_write(spi, txbuf, txbuf_size);
> +	if (ret)
> +		return ret;
> +
> +	ret = poll_status_not_busy(spi, STATUS_READY);
> +	if (ret < 0)
> +		return ret;
> +
> +	return spi_write_then_read(spi, read_command, sizeof(read_command),
> +				   rxbuf, rxbuf_size);
> +}
> +
> +static int microsemi_fpga_ops_write_init(struct fpga_manager *mgr,
> +					 struct fpga_image_info *info,
> +					 const char *buf, size_t count)
> +{
> +	const u8 isc_en_command[] = { SPI_ISC_ENABLE };
> +	const u8 program_mode[] = { SPI_FRAME_INIT, SPI_PRG_MODE };
> +	struct microsemi_fpga_priv *priv = mgr->priv;
> +	struct spi_device *spi = priv->spi;
> +	struct device *dev = &mgr->dev;
> +	u32 isc_ret;
> +	int ret;
> +
> +	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
> +		dev_err(dev, "Partial reconfiguration is not supported\n");
> +
> +		return -EOPNOTSUPP;
> +	}
> +
> +	ret = microsemi_spi_write_then_read(spi, isc_en_command,
> +					    sizeof(isc_en_command),
> +					    &isc_ret, sizeof(isc_ret));
> +	if (ret || isc_ret) {
> +		dev_err(dev, "Failed to enable ISC: %d\n", ret ? ret : isc_ret);
> +
> +		return -EFAULT;
> +	}
> +
> +	ret = microsemi_spi_write(spi, program_mode, sizeof(program_mode));
> +	if (ret) {
> +		dev_err(dev, "Failed to enter program mode: %d\n", ret);
> +
> +		return ret;
> +	}
> +
> +	priv->program_mode = true;
> +
> +	return 0;
> +}
> +
> +static ssize_t lookup_block_start(int id, const char *buf, size_t buf_size)
> +{
> +	u8 header_size, blocks_num, block_id;
> +	u32 block_start, i;
> +
> +	header_size = *(buf + HEADER_SIZE_OFFSET);
> +
> +	if (header_size > buf_size)
> +		return -EFAULT;
> +
> +	blocks_num = *(buf + header_size - 1);
> +
> +	if (header_size + blocks_num * LOOKUP_TABLE_RECORD_SIZE > buf_size)
> +		return -EFAULT;
> +
> +	for (i = 0; i < blocks_num; i++) {
> +		block_id = *(buf + header_size + LOOKUP_TABLE_RECORD_SIZE * i +
> +			     LOOKUP_TABLE_BLOCK_ID_OFFSET);
> +
> +		if (block_id == id) {
> +			memcpy(&block_start,
> +			       buf + header_size +
> +			       LOOKUP_TABLE_RECORD_SIZE * i +
> +			       LOOKUP_TABLE_BLOCK_START_OFFSET,
> +			       sizeof(block_start));
> +
> +			return le32_to_cpu(block_start);
> +		}
> +	}
> +
> +	return -EFAULT;
> +}
> +
> +static ssize_t parse_bitstream_size(const char *buf, size_t buf_size)
> +{
> +	ssize_t	bitstream_size = 0, components_size_start = 0,
> +		component_size_byte_num, component_size_byte_off, i;
> +	u16 components_num;
> +	u32 component_size;
> +
> +	memcpy(&components_num, buf + DATA_SIZE_OFFSET, sizeof(components_num));
> +	components_num = le16_to_cpu(components_num);
> +
> +	components_size_start = lookup_block_start(COMPONENTS_SIZE_ID, buf,
> +						   buf_size);
> +	if (components_size_start < 0)
> +		return components_size_start;
> +
> +	if (components_size_start +
> +	    DIV_ROUND_UP(components_num * BITS_PER_COMPONENT_SIZE,
> +			 BITS_PER_BYTE) > buf_size)
> +		return -EFAULT;
> +
> +	for (i = 0; i < components_num; i++) {
> +		component_size_byte_num =
> +			(i * BITS_PER_COMPONENT_SIZE) / BITS_PER_BYTE;
> +		component_size_byte_off =
> +			(i * BITS_PER_COMPONENT_SIZE) % BITS_PER_BYTE;
> +
> +		memcpy(&component_size,
> +		       buf + components_size_start + component_size_byte_num,
> +		       sizeof(component_size));
> +		component_size = le32_to_cpu(component_size);
> +		component_size >>= component_size_byte_off;
> +		component_size &= GENMASK(BITS_PER_COMPONENT_SIZE - 1, 0);
> +
> +		bitstream_size += component_size;
> +	}
> +
> +	return bitstream_size;
> +}
> +
> +static int microsemi_fpga_ops_write(struct fpga_manager *mgr, const char *buf,
> +				    size_t count)
> +{
> +	ssize_t bitstream_start = 0, bitstream_size;
> +	struct microsemi_fpga_priv *priv = mgr->priv;
> +	struct spi_device *spi = priv->spi;
> +	struct device *dev = &mgr->dev;
> +	u8 tmp_buf[SPI_FRAME_SIZE + 1];
> +	int ret, i;
> +
> +	if (crc_ccitt(0, buf, count)) {
> +		dev_err(dev, "CRC error\n");
> +
> +		return -EINVAL;
> +	}
> +
> +	bitstream_start = lookup_block_start(BITSTREAM_ID, buf, count);
> +	if (bitstream_start < 0) {
> +		dev_err(dev, "Failed to find bitstream start %zd\n",
> +			bitstream_start);
> +
> +		return bitstream_start;
> +	}
> +
> +	bitstream_size = parse_bitstream_size(buf, count);
> +	if (bitstream_size < 0) {
> +		dev_err(dev, "Failed to parse bitstream size %zd\n",
> +			bitstream_size);
> +
> +		return bitstream_size;
> +	}
> +
> +	if (bitstream_start + bitstream_size * SPI_FRAME_SIZE > count) {
> +		dev_err(dev,
> +			"Bitstram outruns firmware. Bitstream start %zd, bitstream size %zd, firmware size %zu\n",
> +			bitstream_start, bitstream_size * SPI_FRAME_SIZE, count);
> +
> +		return -EFAULT;
> +	}
> +
> +	for (i = 0; i < bitstream_size; i++) {
> +		tmp_buf[0] = SPI_FRAME;
> +		memcpy(tmp_buf + 1, buf + bitstream_start + i * SPI_FRAME_SIZE,
> +		       SPI_FRAME_SIZE);
> +
> +		ret = microsemi_spi_write(spi, tmp_buf, sizeof(tmp_buf));
> +		if (ret) {
> +			dev_err(dev,
> +				"Failed to write bitstream frame number %d of %zd\n",
> +				i, bitstream_size);
> +
> +			return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int microsemi_fpga_ops_write_complete(struct fpga_manager *mgr,
> +					     struct fpga_image_info *info)
> +{
> +	const u8 isc_dis_command[] = { SPI_ISC_DISABLE };
> +	const u8 release_command[] = { SPI_RELEASE };
> +	struct microsemi_fpga_priv *priv = mgr->priv;
> +	struct spi_device *spi = priv->spi;
> +	struct device *dev = &mgr->dev;
> +	int ret;
> +
> +	ret = microsemi_spi_write(spi, isc_dis_command,
> +				  sizeof(isc_dis_command));
> +	if (ret) {
> +		dev_err(dev, "Failed to disable ISC: %d\n", ret);
> +
> +		return ret;
> +	}
> +
> +	mdelay(1);
> +
> +	ret = microsemi_spi_write(spi, release_command,
> +				  sizeof(release_command));
> +	if (ret) {
> +		dev_err(dev, "Failed to exit program mode: %d\n", ret);
> +
> +		return ret;
> +	}
> +
> +	priv->program_mode = false;
> +
> +	return 0;
> +}
> +
> +static const struct fpga_manager_ops microsemi_fpga_ops = {
> +	.state = microsemi_fpga_ops_state,
> +	.write_init = microsemi_fpga_ops_write_init,
> +	.write = microsemi_fpga_ops_write,
> +	.write_complete = microsemi_fpga_ops_write_complete,
> +};
> +
> +static int microsemi_fpga_probe(struct spi_device *spi)
> +{
> +	struct microsemi_fpga_priv *priv;
> +	struct device *dev = &spi->dev;
> +	struct fpga_manager *mgr;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->spi = spi;
> +
> +	mgr = devm_fpga_mgr_register(dev, "Microsemi FPGA Manager",
> +				     &microsemi_fpga_ops, priv);
Something else quick that I noticed today is that this string, plus the
.name strings, compatible string etc should indicate that this is spi 
slave programming mode as opposed to the other possible ones (jtag/iap)
> +
> +	return PTR_ERR_OR_ZERO(mgr);
> +}
> +
> +static const struct spi_device_id microsemi_fpga_spi_ids[] = {
> +	{ .name = "polarfire-fpga-mgr", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(spi, microsemi_fpga_spi_ids);
> +
> +static const struct of_device_id microsemi_fpga_of_ids[] = {
> +	{ .compatible = "mscc,polarfire-fpga-mgr" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, microsemi_fpga_of_ids);
> +
> +static struct spi_driver microsemi_fpga_driver = {
> +	.probe = microsemi_fpga_probe,
> +	.id_table = microsemi_fpga_spi_ids,
> +	.driver = {
> +		.name = "microsemi_fpga_manager",
> +		.of_match_table = of_match_ptr(microsemi_fpga_of_ids),
> +	},
> +};
> +
> +module_spi_driver(microsemi_fpga_driver);
> +
> +MODULE_DESCRIPTION("Microsemi FPGA Manager");
> +MODULE_LICENSE("GPL");

Powered by blists - more mailing lists