[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220217113453.13658-32-yong.wu@mediatek.com>
Date: Thu, 17 Feb 2022 19:34:50 +0800
From: Yong Wu <yong.wu@...iatek.com>
To: Joerg Roedel <joro@...tes.org>, Rob Herring <robh+dt@...nel.org>,
"Matthias Brugger" <matthias.bgg@...il.com>,
Will Deacon <will@...nel.org>
CC: Robin Murphy <robin.murphy@....com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Tomasz Figa <tfiga@...omium.org>,
<linux-mediatek@...ts.infradead.org>,
<srv_heupstream@...iatek.com>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<iommu@...ts.linux-foundation.org>,
Hsin-Yi Wang <hsinyi@...omium.org>, <yong.wu@...iatek.com>,
<youlin.pei@...iatek.com>, <anan.sun@...iatek.com>,
<xueqi.zhang@...iatek.com>, <yen-chang.chen@...iatek.com>,
"AngeloGioacchino Del Regno"
<angelogioacchino.delregno@...labora.com>,
<mingyuan.ma@...iatek.com>, <yf.wang@...iatek.com>,
<libo.kang@...iatek.com>, <chengci.xu@...iatek.com>
Subject: [PATCH v5 31/34] iommu/mediatek: Get the proper bankid for multi banks
We preassign some ports in a special bank via the new defined
banks_portmsk. Put it in the plat_data means it is not expected to be
adjusted dynamically.
If the iommu id in the iommu consumer's dtsi node is inside this
banks_portmsk, then we switch it to this special iommu bank, and
initialise the IOMMU bank HW.
Each a bank has the independent pgtable(4GB iova range). Each a bank
is a independent iommu domain/group. Currently we don't separate different
iova ranges inside a bank.
Signed-off-by: Yong Wu <yong.wu@...iatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
---
drivers/iommu/mtk_iommu.c | 39 ++++++++++++++++++++++++++++++++++++---
1 file changed, 36 insertions(+), 3 deletions(-)
diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 86d235d22db1..46d3a8d3fa36 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -191,6 +191,7 @@ struct mtk_iommu_plat_data {
u8 banks_num;
bool banks_enable[MTK_IOMMU_BANK_MAX];
+ unsigned int banks_portmsk[MTK_IOMMU_BANK_MAX];
unsigned char larbid_remap[MTK_LARB_COM_MAX][MTK_LARB_SUBCOM_MAX];
};
@@ -478,6 +479,30 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+static unsigned int mtk_iommu_get_bank_id(struct device *dev,
+ const struct mtk_iommu_plat_data *plat_data)
+{
+ struct iommu_fwspec *fwspec = dev_iommu_fwspec_get(dev);
+ unsigned int i, portmsk = 0, bankid = 0;
+
+ if (plat_data->banks_num == 1)
+ return bankid;
+
+ for (i = 0; i < fwspec->num_ids; i++)
+ portmsk |= BIT(MTK_M4U_TO_PORT(fwspec->ids[i]));
+
+ for (i = 0; i < plat_data->banks_num && i < MTK_IOMMU_BANK_MAX; i++) {
+ if (!plat_data->banks_enable[i])
+ continue;
+
+ if (portmsk & plat_data->banks_portmsk[i]) {
+ bankid = i;
+ break;
+ }
+ }
+ return bankid; /* default is 0 */
+}
+
static int mtk_iommu_get_iova_region_id(struct device *dev,
const struct mtk_iommu_plat_data *plat_data)
{
@@ -630,13 +655,14 @@ static int mtk_iommu_attach_device(struct iommu_domain *domain,
struct list_head *hw_list = data->hw_list;
struct device *m4udev = data->dev;
struct mtk_iommu_bank_data *bank;
- unsigned int bankid = 0;
+ unsigned int bankid;
int ret, region_id;
region_id = mtk_iommu_get_iova_region_id(dev, data->plat_data);
if (region_id < 0)
return region_id;
+ bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
mutex_lock(&dom->mutex);
if (!dom->bank) {
/* Data is in the frstdata in sharing pgtable case. */
@@ -813,6 +839,7 @@ static struct iommu_group *mtk_iommu_device_group(struct device *dev)
struct mtk_iommu_data *c_data = dev_iommu_priv_get(dev), *data;
struct list_head *hw_list = c_data->hw_list;
struct iommu_group *group;
+ unsigned int bankid, groupid;
int regionid;
data = mtk_iommu_get_frst_data(hw_list);
@@ -823,12 +850,18 @@ static struct iommu_group *mtk_iommu_device_group(struct device *dev)
if (regionid < 0)
return ERR_PTR(regionid);
+ bankid = mtk_iommu_get_bank_id(dev, data->plat_data);
mutex_lock(&data->mutex);
- group = data->m4u_group[regionid];
+ /*
+ * If the bank function is enabled, each a bank is a iommu group/domain.
+ * otherwise, each a iova region is a iommu group/domain.
+ */
+ groupid = bankid ? bankid : regionid;
+ group = data->m4u_group[groupid];
if (!group) {
group = iommu_group_alloc();
if (!IS_ERR(group))
- data->m4u_group[regionid] = group;
+ data->m4u_group[groupid] = group;
} else {
iommu_group_ref_get(group);
}
--
2.18.0
Powered by blists - more mailing lists