[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20ceb422-8464-4f12-0b46-ad5c4d43da3c@ti.com>
Date: Thu, 17 Feb 2022 21:07:08 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Aswath Govindraju <a-govindraju@...com>,
Swapnil Jakhade <sjakhade@...ence.com>
CC: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] arm64: dts: ti: k3-j721e-common-proc-board: Enable
PCIe + QSGMII multilink configuration
Hi Aswath, Swapnil,
On 02/02/22 10:09 am, Aswath Govindraju wrote:
> From: Swapnil Jakhade <sjakhade@...ence.com>
>
> The zeroth instance of SerDes on J721E common processor board will be
> shared between PCIe and QSGMII. Therefore, add support for enabling this.
>
> Signed-off-by: Swapnil Jakhade <sjakhade@...ence.com>
> Signed-off-by: Aswath Govindraju <a-govindraju@...com>
> ---
>
> changes since v1:
> - Fixed the commit message.
>
> .../boot/dts/ti/k3-j721e-common-proc-board.dts | 15 ++++++++++++---
> 1 file changed, 12 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> index 2d7596911b27..157d86dc2824 100644
> --- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
> @@ -431,7 +431,7 @@
> };
>
> &serdes_ln_ctrl {
> - idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_PCIE0_LANE1>,
> + idle-states = <J721E_SERDES0_LANE0_PCIE0_LANE0>, <J721E_SERDES0_LANE1_QSGMII_LANE2>,
> <J721E_SERDES1_LANE0_PCIE1_LANE0>, <J721E_SERDES1_LANE1_PCIE1_LANE1>,
> <J721E_SERDES2_LANE0_PCIE2_LANE0>, <J721E_SERDES2_LANE1_PCIE2_LANE1>,
> <J721E_SERDES3_LANE0_USB3_0_SWAP>, <J721E_SERDES3_LANE1_USB3_0>,
This change will kick-in errata i2183
https://www.ti.com/lit/er/sprz455a/sprz455a.pdf
This will break PCIe endpoint mode. Let's get the errata workaround merged
before this.
Thanks,
Kishon
> @@ -757,8 +757,8 @@
> };
>
> &serdes0 {
> - assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>;
> - assigned-clock-parents = <&wiz0_pll1_refclk>;
> + assigned-clocks = <&serdes0 CDNS_SIERRA_PLL_CMNLC>, <&serdes0 CDNS_SIERRA_PLL_CMNLC1>;
> + assigned-clock-parents = <&wiz0_pll1_refclk>, <&wiz0_pll1_refclk>;
>
> serdes0_pcie_link: phy@0 {
> reg = <0>;
> @@ -767,6 +767,15 @@
> cdns,phy-type = <PHY_TYPE_PCIE>;
> resets = <&serdes_wiz0 1>;
> };
> +
> + serdes0_qsgmii_link: phy@1 {
> + reg = <1>;
> + cdns,num-lanes = <1>;
> + #phy-cells = <0>;
> + cdns,phy-type = <PHY_TYPE_QSGMII>;
> + resets = <&serdes_wiz0 2>;
> + };
> +
> };
>
> &serdes1 {
>
Powered by blists - more mailing lists