| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sat, 19 Feb 2022 11:01:54 +0100
From: José Expósito <jose.exposito89@...il.com>
To: jikos@...nel.org
Cc: benjamin.tissoires@...hat.com, spbnick@...il.com,
linux-input@...r.kernel.org, linux-kernel@...r.kernel.org,
José Expósito <jose.exposito89@...il.com>
Subject: [PATCH for-5.18/uclogic 6/9] HID: uclogic: Use "frame" instead of "buttonpad"
From: Nikolai Kondrashov <spbnick@...il.com>
Use the term "frame" instead of "buttonpad" for consistency, in UC-Logic
driver.
Signed-off-by: Nikolai Kondrashov <spbnick@...il.com>
Signed-off-by: José Expósito <jose.exposito89@...il.com>
---
drivers/hid/hid-uclogic-params.c | 46 +++++++++++++++-----------------
drivers/hid/hid-uclogic-rdesc.c | 32 +++++++++++-----------
drivers/hid/hid-uclogic-rdesc.h | 26 +++++++++---------
3 files changed, 51 insertions(+), 53 deletions(-)
diff --git a/drivers/hid/hid-uclogic-params.c b/drivers/hid/hid-uclogic-params.c
index a4a53ab1e72c..168749d9a112 100644
--- a/drivers/hid/hid-uclogic-params.c
+++ b/drivers/hid/hid-uclogic-params.c
@@ -431,8 +431,8 @@ static int uclogic_params_frame_init_with_desc(
}
/**
- * uclogic_params_frame_init_v1_buttonpad() - initialize abstract buttonpad
- * on a v1 tablet interface.
+ * uclogic_params_frame_init_v1() - initialize v1 tablet interface frame
+ * controls.
*
* @frame: Pointer to the frame parameters to initialize (to be cleaned
* up with uclogic_params_frame_cleanup()). Not modified in case
@@ -446,8 +446,7 @@ static int uclogic_params_frame_init_with_desc(
* Returns:
* Zero, if successful. A negative errno code on error.
*/
-static int uclogic_params_frame_init_v1_buttonpad(
- struct uclogic_params_frame *frame,
+static int uclogic_params_frame_init_v1(struct uclogic_params_frame *frame,
bool *pfound,
struct hid_device *hdev)
{
@@ -488,9 +487,9 @@ static int uclogic_params_frame_init_v1_buttonpad(
hid_dbg(hdev, "generic buttons enabled\n");
rc = uclogic_params_frame_init_with_desc(
frame,
- uclogic_rdesc_buttonpad_v1_arr,
- uclogic_rdesc_buttonpad_v1_size,
- UCLOGIC_RDESC_BUTTONPAD_V1_ID);
+ uclogic_rdesc_frame_v1_arr,
+ uclogic_rdesc_frame_v1_size,
+ UCLOGIC_RDESC_FRAME_V1_ID);
if (rc != 0)
goto cleanup;
found = true;
@@ -750,22 +749,22 @@ static int uclogic_params_huion_init(struct uclogic_params *params,
goto cleanup;
} else if (found) {
hid_dbg(hdev, "pen v2 parameters found\n");
- /* Create v2 buttonpad parameters */
+ /* Create v2 frame parameters */
rc = uclogic_params_frame_init_with_desc(
&p.frame,
- uclogic_rdesc_buttonpad_v2_arr,
- uclogic_rdesc_buttonpad_v2_size,
- UCLOGIC_RDESC_BUTTONPAD_V2_ID);
+ uclogic_rdesc_frame_v2_arr,
+ uclogic_rdesc_frame_v2_size,
+ UCLOGIC_RDESC_FRAME_V2_ID);
if (rc != 0) {
hid_err(hdev,
- "failed creating v2 buttonpad parameters: %d\n",
+ "failed creating v2 frame parameters: %d\n",
rc);
goto cleanup;
}
/* Link frame button subreports from pen reports */
p.pen.subreport_list[0].value = 0xe0;
p.pen.subreport_list[0].id =
- UCLOGIC_RDESC_BUTTONPAD_V2_ID;
+ UCLOGIC_RDESC_FRAME_V2_ID;
goto output;
}
hid_dbg(hdev, "pen v2 parameters not found\n");
@@ -779,21 +778,20 @@ static int uclogic_params_huion_init(struct uclogic_params *params,
goto cleanup;
} else if (found) {
hid_dbg(hdev, "pen v1 parameters found\n");
- /* Try to probe v1 buttonpad */
- rc = uclogic_params_frame_init_v1_buttonpad(
- &p.frame,
- &found, hdev);
+ /* Try to probe v1 frame */
+ rc = uclogic_params_frame_init_v1(&p.frame,
+ &found, hdev);
if (rc != 0) {
- hid_err(hdev, "v1 buttonpad probing failed: %d\n", rc);
+ hid_err(hdev, "v1 frame probing failed: %d\n", rc);
goto cleanup;
}
- hid_dbg(hdev, "buttonpad v1 parameters%s found\n",
+ hid_dbg(hdev, "frame v1 parameters%s found\n",
(found ? "" : " not"));
if (found) {
/* Link frame button subreports from pen reports */
p.pen.subreport_list[0].value = 0xe0;
p.pen.subreport_list[0].id =
- UCLOGIC_RDESC_BUTTONPAD_V1_ID;
+ UCLOGIC_RDESC_FRAME_V1_ID;
}
goto output;
}
@@ -1067,7 +1065,7 @@ int uclogic_params_init(struct uclogic_params *params,
UCLOGIC_RDESC_UGEE_G5_FRAME_ID);
if (rc != 0) {
hid_err(hdev,
- "failed creating buttonpad parameters: %d\n",
+ "failed creating frame parameters: %d\n",
rc);
goto cleanup;
}
@@ -1096,12 +1094,12 @@ int uclogic_params_init(struct uclogic_params *params,
} else if (found) {
rc = uclogic_params_frame_init_with_desc(
&p.frame,
- uclogic_rdesc_ugee_ex07_buttonpad_arr,
- uclogic_rdesc_ugee_ex07_buttonpad_size,
+ uclogic_rdesc_ugee_ex07_frame_arr,
+ uclogic_rdesc_ugee_ex07_frame_size,
0);
if (rc != 0) {
hid_err(hdev,
- "failed creating buttonpad parameters: %d\n",
+ "failed creating frame parameters: %d\n",
rc);
goto cleanup;
}
diff --git a/drivers/hid/hid-uclogic-rdesc.c b/drivers/hid/hid-uclogic-rdesc.c
index 66aa83f67ccc..e8dedede3395 100644
--- a/drivers/hid/hid-uclogic-rdesc.c
+++ b/drivers/hid/hid-uclogic-rdesc.c
@@ -652,12 +652,12 @@ const size_t uclogic_rdesc_pen_v2_template_size =
sizeof(uclogic_rdesc_pen_v2_template_arr);
/*
- * Expand to the contents of a generic buttonpad report descriptor.
+ * Expand to the contents of a generic frame report descriptor.
*
* @_id: The report ID to use.
* @_size: Size of the report to pad to, including report ID, bytes.
*/
-#define UCLOGIC_RDESC_BUTTONPAD_BYTES(_id, _size) \
+#define UCLOGIC_RDESC_FRAME_BYTES(_id, _size) \
0x05, 0x01, /* Usage Page (Desktop), */ \
0x09, 0x07, /* Usage (Keypad), */ \
0xA1, 0x01, /* Collection (Application), */ \
@@ -698,22 +698,22 @@ const size_t uclogic_rdesc_pen_v2_template_size =
0xC0, /* End Collection, */ \
0xC0 /* End Collection */
-/* Fixed report descriptor for (tweaked) v1 buttonpad reports */
-const __u8 uclogic_rdesc_buttonpad_v1_arr[] = {
- UCLOGIC_RDESC_BUTTONPAD_BYTES(UCLOGIC_RDESC_BUTTONPAD_V1_ID, 8)
+/* Fixed report descriptor for (tweaked) v1 frame reports */
+const __u8 uclogic_rdesc_frame_v1_arr[] = {
+ UCLOGIC_RDESC_FRAME_BYTES(UCLOGIC_RDESC_FRAME_V1_ID, 8)
};
-const size_t uclogic_rdesc_buttonpad_v1_size =
- sizeof(uclogic_rdesc_buttonpad_v1_arr);
+const size_t uclogic_rdesc_frame_v1_size =
+ sizeof(uclogic_rdesc_frame_v1_arr);
-/* Fixed report descriptor for (tweaked) v2 buttonpad reports */
-const __u8 uclogic_rdesc_buttonpad_v2_arr[] = {
- UCLOGIC_RDESC_BUTTONPAD_BYTES(UCLOGIC_RDESC_BUTTONPAD_V2_ID, 12)
+/* Fixed report descriptor for (tweaked) v2 frame reports */
+const __u8 uclogic_rdesc_frame_v2_arr[] = {
+ UCLOGIC_RDESC_FRAME_BYTES(UCLOGIC_RDESC_FRAME_V2_ID, 12)
};
-const size_t uclogic_rdesc_buttonpad_v2_size =
- sizeof(uclogic_rdesc_buttonpad_v2_arr);
+const size_t uclogic_rdesc_frame_v2_size =
+ sizeof(uclogic_rdesc_frame_v2_arr);
-/* Fixed report descriptor for Ugee EX07 buttonpad */
-const __u8 uclogic_rdesc_ugee_ex07_buttonpad_arr[] = {
+/* Fixed report descriptor for Ugee EX07 frame */
+const __u8 uclogic_rdesc_ugee_ex07_frame_arr[] = {
0x05, 0x01, /* Usage Page (Desktop), */
0x09, 0x07, /* Usage (Keypad), */
0xA1, 0x01, /* Collection (Application), */
@@ -736,8 +736,8 @@ const __u8 uclogic_rdesc_ugee_ex07_buttonpad_arr[] = {
0xC0, /* End Collection, */
0xC0 /* End Collection */
};
-const size_t uclogic_rdesc_ugee_ex07_buttonpad_size =
- sizeof(uclogic_rdesc_ugee_ex07_buttonpad_arr);
+const size_t uclogic_rdesc_ugee_ex07_frame_size =
+ sizeof(uclogic_rdesc_ugee_ex07_frame_arr);
/* Fixed report descriptor for Ugee G5 frame controls */
const __u8 uclogic_rdesc_ugee_g5_frame_arr[] = {
diff --git a/drivers/hid/hid-uclogic-rdesc.h b/drivers/hid/hid-uclogic-rdesc.h
index c5da51055af3..40c6f02c6bab 100644
--- a/drivers/hid/hid-uclogic-rdesc.h
+++ b/drivers/hid/hid-uclogic-rdesc.h
@@ -117,23 +117,23 @@ extern const size_t uclogic_rdesc_pen_v1_template_size;
extern const __u8 uclogic_rdesc_pen_v2_template_arr[];
extern const size_t uclogic_rdesc_pen_v2_template_size;
-/* Fixed report descriptor for (tweaked) v1 buttonpad reports */
-extern const __u8 uclogic_rdesc_buttonpad_v1_arr[];
-extern const size_t uclogic_rdesc_buttonpad_v1_size;
+/* Fixed report descriptor for (tweaked) v1 frame reports */
+extern const __u8 uclogic_rdesc_frame_v1_arr[];
+extern const size_t uclogic_rdesc_frame_v1_size;
-/* Report ID for tweaked v1 buttonpad reports */
-#define UCLOGIC_RDESC_BUTTONPAD_V1_ID 0xf7
+/* Report ID for tweaked v1 frame reports */
+#define UCLOGIC_RDESC_FRAME_V1_ID 0xf7
-/* Fixed report descriptor for (tweaked) v2 buttonpad reports */
-extern const __u8 uclogic_rdesc_buttonpad_v2_arr[];
-extern const size_t uclogic_rdesc_buttonpad_v2_size;
+/* Fixed report descriptor for (tweaked) v2 frame reports */
+extern const __u8 uclogic_rdesc_frame_v2_arr[];
+extern const size_t uclogic_rdesc_frame_v2_size;
-/* Report ID for tweaked v2 buttonpad reports */
-#define UCLOGIC_RDESC_BUTTONPAD_V2_ID 0xf7
+/* Report ID for tweaked v2 frame reports */
+#define UCLOGIC_RDESC_FRAME_V2_ID 0xf7
-/* Fixed report descriptor for Ugee EX07 buttonpad */
-extern const __u8 uclogic_rdesc_ugee_ex07_buttonpad_arr[];
-extern const size_t uclogic_rdesc_ugee_ex07_buttonpad_size;
+/* Fixed report descriptor for Ugee EX07 frame */
+extern const __u8 uclogic_rdesc_ugee_ex07_frame_arr[];
+extern const size_t uclogic_rdesc_ugee_ex07_frame_size;
/* Fixed report descriptor for XP-Pen Deco 01 frame controls */
extern const __u8 uclogic_rdesc_xppen_deco01_frame_arr[];
--
2.25.1
Powered by blists - more mailing lists