[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220220035321.3870-3-warp5tw@gmail.com>
Date: Sun, 20 Feb 2022 11:53:12 +0800
From: Tyrone Ting <warp5tw@...il.com>
To: avifishman70@...il.com, tmaimon77@...il.com, tali.perry1@...il.com,
venture@...gle.com, yuenn@...gle.com, benjaminfair@...gle.com,
robh+dt@...nel.org, krzysztof.kozlowski@...onical.com,
semen.protsenko@...aro.org, yangyicong@...ilicon.com,
wsa@...nel.org, jie.deng@...el.com, sven@...npeter.dev,
bence98@....bme.hu, christophe.leroy@...roup.eu,
lukas.bulwahn@...il.com, olof@...om.net, arnd@...db.de,
digetx@...il.com, andriy.shevchenko@...ux.intel.com,
warp5tw@...il.com, tali.perry@...oton.com, Avi.Fishman@...oton.com,
tomer.maimon@...oton.com, KWLIU@...oton.com, JJLIU0@...oton.com,
kfting@...oton.com
Cc: openbmc@...ts.ozlabs.org, linux-i2c@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 02/11] dt-bindings: i2c: npcm: support NPCM845
From: Tyrone Ting <kfting@...oton.com>
Add compatible and nuvoton,sys-mgr description for NPCM i2c module.
Signed-off-by: Tyrone Ting <kfting@...oton.com>
Signed-off-by: Tali Perry <tali.perry1@...il.com>
---
.../bindings/i2c/nuvoton,npcm7xx-i2c.yaml | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
index 128444942aec..809c51ac32fe 100644
--- a/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/nuvoton,npcm7xx-i2c.yaml
@@ -7,17 +7,18 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: nuvoton NPCM7XX I2C Controller Device Tree Bindings
description: |
- The NPCM750x includes sixteen I2C bus controllers. All Controllers support
- both master and slave mode. Each controller can switch between master and slave
- at run time (i.e. IPMB mode). Each controller has two 16 byte HW FIFO for TX and
- RX.
+ I2C bus controllers of the NPCM series support both master and
+ slave mode. Each controller can switch between master and slave at run time
+ (i.e. IPMB mode). HW FIFO for TX and RX are supported.
maintainers:
- Tali Perry <tali.perry1@...il.com>
properties:
compatible:
- const: nuvoton,npcm750-i2c
+ enum:
+ - nuvoton,npcm750-i2c
+ - nuvoton,npcm845-i2c
reg:
maxItems: 1
@@ -36,11 +37,16 @@ properties:
default: 100000
enum: [100000, 400000, 1000000]
+ nuvoton,sys-mgr:
+ $ref: "/schemas/types.yaml#/definitions/phandle"
+ description: The phandle of system manager register node.
+
required:
- compatible
- reg
- interrupts
- clocks
+ - nuvoton,sys-mgr
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
@@ -57,6 +63,7 @@ examples:
clock-frequency = <100000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
compatible = "nuvoton,npcm750-i2c";
+ nuvoton,sys-mgr = <&gcr>;
};
...
--
2.17.1
Powered by blists - more mailing lists