Message-ID: <20220221132211.000075ea@Huawei.com>
Date:   Mon, 21 Feb 2022 13:22:11 +0000
From:   Jonathan Cameron <Jonathan.Cameron@...wei.com>
To:     Yicong Yang <yangyicong@...wei.com>
CC:     Yicong Yang <yangyicong@...ilicon.com>,
        <gregkh@...uxfoundation.org>, <helgaas@...nel.org>,
        <alexander.shishkin@...ux.intel.com>, <lorenzo.pieralisi@....com>,
        <will@...nel.org>, <mark.rutland@....com>,
        <mathieu.poirier@...aro.org>, <suzuki.poulose@....com>,
        <mike.leach@...aro.org>, <leo.yan@...aro.org>,
        <daniel.thompson@...aro.org>, <joro@...tes.org>,
        <john.garry@...wei.com>, <shameerali.kolothum.thodi@...wei.com>,
        <robin.murphy@....com>, <peterz@...radead.org>, <mingo@...hat.com>,
        <acme@...nel.org>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <coresight@...ts.linaro.org>, <linux-pci@...r.kernel.org>,
        <linux-perf-users@...r.kernel.org>,
        <iommu@...ts.linux-foundation.org>, <prime.zeng@...wei.com>,
        <liuqi115@...wei.com>, <zhangshaokun@...ilicon.com>,
        <linuxarm@...wei.com>, <song.bao.hua@...ilicon.com>
Subject: Re: [PATCH v4 2/8] hwtracing: Add trace function support for
 HiSilicon PCIe Tune and Trace device

On Mon, 21 Feb 2022 21:13:45 +0800
Yicong Yang <yangyicong@...wei.com> wrote:

> Hi Jonathan,
> 
> On 2022/2/21 19:18, Jonathan Cameron wrote:
> > On Mon, 21 Feb 2022 16:43:01 +0800
> > Yicong Yang <yangyicong@...ilicon.com> wrote:
> >   
> >> HiSilicon PCIe tune and trace device(PTT) is a PCIe Root Complex
> >> integrated Endpoint(RCiEP) device, providing the capability
> >> to dynamically monitor and tune the PCIe traffic, and trace
> >> the TLP headers.
> >>
> >> Add the driver for the device to enable the trace function.
> >> This patch adds basic function of trace, including the device's
> >> probe and initialization, functions for trace buffer allocation
> >> and trace enable/disable, register an interrupt handler to
> >> simply response to the DMA events. The user interface of trace
> >> will be added in the following patch.
> >>
> >> Signed-off-by: Yicong Yang <yangyicong@...ilicon.com>  
> > 
> > Hi Yicong,
> > 
> > A few really minor things inline, particularly one place
> > where you can improve the error handling.
> > It's always fiddly to handle errors in a pci_walk_bus() but
> > in this case it's not too difficult as you just need to store
> > the retval somewhere in the private data then retrieve it
> > after the pci_walk_bus() call.
> >   
> 
> Thanks for the quick reply!
> 
> The pci_walk_bus() in this patch will fail only if the memory allocation
> of filter struct fails. We won't allocate memory in the pci_bus_walk()
> after Patch 4 so it will never fail. Maybe I can add some comments
> mentioning this.
Great. Given that answers my only significant question.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>

> 
> I also expressed this inline.
> 
> > Thanks,
> > 
> > Jonathan
> > 
> > 
> >   
> >> ---
> >>  drivers/Makefile                 |   1 +
> >>  drivers/hwtracing/Kconfig        |   2 +
> >>  drivers/hwtracing/ptt/Kconfig    |  11 +
> >>  drivers/hwtracing/ptt/Makefile   |   2 +
> >>  drivers/hwtracing/ptt/hisi_ptt.c | 370 +++++++++++++++++++++++++++++++
> >>  drivers/hwtracing/ptt/hisi_ptt.h | 149 +++++++++++++
> >>  6 files changed, 535 insertions(+)
> >>  create mode 100644 drivers/hwtracing/ptt/Kconfig
> >>  create mode 100644 drivers/hwtracing/ptt/Makefile
> >>  create mode 100644 drivers/hwtracing/ptt/hisi_ptt.c
> >>  create mode 100644 drivers/hwtracing/ptt/hisi_ptt.h
> >>
> >> diff --git a/drivers/Makefile b/drivers/Makefile
> >> index a110338c860c..ab3411e4eba5 100644
> >> --- a/drivers/Makefile
> >> +++ b/drivers/Makefile
> >> @@ -175,6 +175,7 @@ obj-$(CONFIG_USB4)		+= thunderbolt/
> >>  obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/
> >>  obj-y				+= hwtracing/intel_th/
> >>  obj-$(CONFIG_STM)		+= hwtracing/stm/
> >> +obj-$(CONFIG_HISI_PTT)		+= hwtracing/ptt/
> >>  obj-$(CONFIG_ANDROID)		+= android/
> >>  obj-$(CONFIG_NVMEM)		+= nvmem/
> >>  obj-$(CONFIG_FPGA)		+= fpga/
> >> diff --git a/drivers/hwtracing/Kconfig b/drivers/hwtracing/Kconfig
> >> index 13085835a636..911ee977103c 100644
> >> --- a/drivers/hwtracing/Kconfig
> >> +++ b/drivers/hwtracing/Kconfig
> >> @@ -5,4 +5,6 @@ source "drivers/hwtracing/stm/Kconfig"
> >>  
> >>  source "drivers/hwtracing/intel_th/Kconfig"
> >>  
> >> +source "drivers/hwtracing/ptt/Kconfig"
> >> +
> >>  endmenu
> >> diff --git a/drivers/hwtracing/ptt/Kconfig b/drivers/hwtracing/ptt/Kconfig
> >> new file mode 100644
> >> index 000000000000..41fa83921a07
> >> --- /dev/null
> >> +++ b/drivers/hwtracing/ptt/Kconfig
> >> @@ -0,0 +1,11 @@
> >> +# SPDX-License-Identifier: GPL-2.0-only
> >> +config HISI_PTT
> >> +	tristate "HiSilicon PCIe Tune and Trace Device"
> >> +	depends on ARM64 && PCI && HAS_DMA && HAS_IOMEM
> >> +	help
> >> +	  HiSilicon PCIe Tune and Trace Device exists as a PCIe RCiEP
> >> +	  device, and it provides support for PCIe traffic tuning and
> >> +	  tracing TLP headers to the memory.
> >> +
> >> +	  This driver can also be built as a module. If so, the module
> >> +	  will be called hisi_ptt.
> >> diff --git a/drivers/hwtracing/ptt/Makefile b/drivers/hwtracing/ptt/Makefile
> >> new file mode 100644
> >> index 000000000000..908c09a98161
> >> --- /dev/null
> >> +++ b/drivers/hwtracing/ptt/Makefile
> >> @@ -0,0 +1,2 @@
> >> +# SPDX-License-Identifier: GPL-2.0
> >> +obj-$(CONFIG_HISI_PTT) += hisi_ptt.o
> >> diff --git a/drivers/hwtracing/ptt/hisi_ptt.c b/drivers/hwtracing/ptt/hisi_ptt.c
> >> new file mode 100644
> >> index 000000000000..a5b4f09ccd1e
> >> --- /dev/null
> >> +++ b/drivers/hwtracing/ptt/hisi_ptt.c
> >> @@ -0,0 +1,370 @@  
> > 
> > ...
> >   
> >> +static void hisi_ptt_free_trace_buf(struct hisi_ptt *hisi_ptt)
> >> +{
> >> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
> >> +	struct device *dev = &hisi_ptt->pdev->dev;
> >> +	int i;
> >> +
> >> +	if (!ctrl->trace_buf)
> >> +		return;
> >> +
> >> +	for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++)
> >> +		if (ctrl->trace_buf[i].addr)
> >> +			dma_free_coherent(dev, HISI_PTT_TRACE_BUF_SIZE,
> >> +					  ctrl->trace_buf[i].addr,
> >> +					  ctrl->trace_buf[i].dma);
> >> +
> >> +	kfree(ctrl->trace_buf);
> >> +	ctrl->trace_buf = NULL;
> >> +}
> >> +
> >> +static int hisi_ptt_alloc_trace_buf(struct hisi_ptt *hisi_ptt)
> >> +{
> >> +	struct hisi_ptt_trace_ctrl *ctrl = &hisi_ptt->trace_ctrl;
> >> +	struct device *dev = &hisi_ptt->pdev->dev;
> >> +	int i;
> >> +
> >> +	hisi_ptt->trace_ctrl.buf_index = 0;
> >> +
> >> +	/* If the trace buffer has already been allocated, zero it. */
> >> +	if (ctrl->trace_buf) {
> >> +		for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; i++)
> >> +			memset(ctrl->trace_buf[i].addr, 0, HISI_PTT_TRACE_BUF_SIZE);
> >> +		return 0;
> >> +	}
> >> +
> >> +	ctrl->trace_buf = kcalloc(HISI_PTT_TRACE_BUF_CNT, sizeof(struct hisi_ptt_dma_buffer),  
> > 
> > Slight preference for sizeof(*ctrl->trace_buf) as it saves a reviewer from scrolling down
> > to check the type is correct.
> >   
> 
> will change to that.
> 
> >> +				  GFP_KERNEL);
> >> +	if (!ctrl->trace_buf)
> >> +		return -ENOMEM;
> >> +
> >> +	for (i = 0; i < HISI_PTT_TRACE_BUF_CNT; ++i) {
> >> +		ctrl->trace_buf[i].addr = dma_alloc_coherent(dev, HISI_PTT_TRACE_BUF_SIZE,
> >> +							     &ctrl->trace_buf[i].dma,
> >> +							     GFP_KERNEL);
> >> +		if (!ctrl->trace_buf[i].addr) {
> >> +			hisi_ptt_free_trace_buf(hisi_ptt);
> >> +			return -ENOMEM;
> >> +		}
> >> +	}
> >> +
> >> +	return 0;
> >> +}
> >> +  
> > 
> > ...
> >   
> >> +
> >> +static int hisi_ptt_init_filters(struct pci_dev *pdev, void *data)
> >> +{
> >> +	struct hisi_ptt_filter_desc *filter;
> >> +	struct hisi_ptt *hisi_ptt = data;
> >> +	struct list_head *target_list;
> >> +
> >> +	target_list = pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ?
> >> +		      &hisi_ptt->port_filters : &hisi_ptt->req_filters;
> >> +
> >> +	filter = kzalloc(sizeof(*filter), GFP_KERNEL);
> >> +	if (!filter)  
> > 
> > As below, if this happens we'll be left in an odd intermediate state
> > where the error is not communicated up to the probe function but the
> > filters are only partly set up.
> >   
> 
> The memory allocation will be moved to workqueue function after patch 4
> and the function won't fail anymore. I'd like to comment here to mention
> that the allocation here is temporary and in the following patch this
> function will always succeed.
> 
> Thanks,
> Yicong
> 
> >> +		return -ENOMEM;
> >> +
> >> +	filter->pdev = pdev;
> >> +	list_add_tail(&filter->list, target_list);
> >> +
> >> +	/* Update the available port mask */
> >> +	if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
> >> +		hisi_ptt->port_mask |= hisi_ptt_get_filter_val(pdev);
> >> +
> >> +	return 0;
> >> +}
> >> +
> >> +static void hisi_ptt_release_filters(struct hisi_ptt *hisi_ptt)
> >> +{
> >> +	struct hisi_ptt_filter_desc *filter, *tfilter;
> >> +
> >> +	list_for_each_entry_safe(filter, tfilter, &hisi_ptt->req_filters, list) {
> >> +		list_del(&filter->list);
> >> +		kfree(filter);
> >> +	}
> >> +
> >> +	list_for_each_entry_safe(filter, tfilter, &hisi_ptt->port_filters, list) {
> >> +		list_del(&filter->list);
> >> +		kfree(filter);
> >> +	}
> >> +}
> >> +
> >> +static void hisi_ptt_init_ctrls(struct hisi_ptt *hisi_ptt)
> >> +{
> >> +	struct pci_dev *pdev = hisi_ptt->pdev;
> >> +	struct pci_bus *bus;
> >> +	u32 reg;
> >> +
> >> +	INIT_LIST_HEAD(&hisi_ptt->port_filters);
> >> +	INIT_LIST_HEAD(&hisi_ptt->req_filters);
> >> +
> >> +	/*
> >> +	 * The device range register provides the information about the
> >> +	 * root ports which the RCiEP can control and trace. The RCiEP
> >> +	 * and the root ports it support are on the same PCIe core, with
> >> +	 * same domain number but maybe different bus number. The device
> >> +	 * range register will tell us which root ports we can support,
> >> +	 * Bit[31:16] indicates the upper BDF numbers of the root port,
> >> +	 * while Bit[15:0] indicates the lower.
> >> +	 */
> >> +	reg = readl(hisi_ptt->iobase + HISI_PTT_DEVICE_RANGE);
> >> +	hisi_ptt->upper = FIELD_GET(HISI_PTT_DEVICE_RANGE_UPPER, reg);
> >> +	hisi_ptt->lower = FIELD_GET(HISI_PTT_DEVICE_RANGE_LOWER, reg);
> >> +
> >> +	bus = pci_find_bus(pci_domain_nr(pdev->bus), PCI_BUS_NUM(hisi_ptt->upper));
> >> +	if (bus)
> >> +		pci_walk_bus(bus, hisi_ptt_init_filters, hisi_ptt);  
> > 
> > Error handling needed for the hisi_ptt_init_filters call though that will require
> > placing a retval somewhere in hisi_ptt so we can know there was an error.
> >   
> >> +
> >> +	hisi_ptt->trace_ctrl.default_cpu = cpumask_first(cpumask_of_node(dev_to_node(&pdev->dev)));
> >> +}
> >> +
> >> +/*
> >> + * The DMA of PTT trace can only use direct mapping, due to some
> >> + * hardware restriction. Check whether there is an IOMMU or the
> >> + * policy of the IOMMU domain is passthrough, otherwise the trace
> >> + * cannot work.
> >> + *
> >> + * The PTT device is supposed to behind the ARM SMMUv3, which
> >> + * should have passthrough the device by a quirk.  
> > 
> > Trivial but perhaps a clearer wording is:
> > 
> > The PTT Device is behind an ARM SMMUv3 which should be set to
> > passthrough for this device using a quirk.
> > 
> >   
> >> + */
> >> +static int hisi_ptt_check_iommu_mapping(struct pci_dev *pdev)
> >> +{
> >> +	struct iommu_domain *iommu_domain;
> >> +
> >> +	iommu_domain = iommu_get_domain_for_dev(&pdev->dev);
> >> +	if (!iommu_domain || iommu_domain->type == IOMMU_DOMAIN_IDENTITY)
> >> +		return 0;
> >> +
> >> +	return -EOPNOTSUPP;
> >> +}
> >> +
> >> +static int hisi_ptt_probe(struct pci_dev *pdev,
> >> +			  const struct pci_device_id *id)
> >> +{
> >> +	struct hisi_ptt *hisi_ptt;
> >> +	int ret;
> >> +
> >> +	ret = hisi_ptt_check_iommu_mapping(pdev);
> >> +	if (ret) {
> >> +		pci_err(pdev, "cannot work with non-direct DMA mapping.\n");
> >> +		return ret;
> >> +	}
> >> +
> >> +	hisi_ptt = devm_kzalloc(&pdev->dev, sizeof(*hisi_ptt), GFP_KERNEL);
> >> +	if (!hisi_ptt)
> >> +		return -ENOMEM;
> >> +
> >> +	mutex_init(&hisi_ptt->mutex);
> >> +	hisi_ptt->pdev = pdev;
> >> +	pci_set_drvdata(pdev, hisi_ptt);
> >> +
> >> +	ret = pcim_enable_device(pdev);
> >> +	if (ret) {
> >> +		pci_err(pdev, "failed to enable device, ret = %d.\n", ret);
> >> +		return ret;
> >> +	}
> >> +
> >> +	ret = pcim_iomap_regions(pdev, BIT(2), DRV_NAME);
> >> +	if (ret) {
> >> +		pci_err(pdev, "failed to remap io memory, ret = %d.\n", ret);
> >> +		return ret;
> >> +	}
> >> +
> >> +	hisi_ptt->iobase = pcim_iomap_table(pdev)[2];
> >> +
> >> +	ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
> >> +	if (ret) {
> >> +		pci_err(pdev, "failed to set 64 bit dma mask, ret = %d.\n", ret);
> >> +		return ret;
> >> +	}
> >> +	pci_set_master(pdev);
> >> +
> >> +	ret = hisi_ptt_register_irq(hisi_ptt);
> >> +	if (ret)
> >> +		return ret;
> >> +
> >> +	hisi_ptt_init_ctrls(hisi_ptt);  
> > 
> > There are some elements of this call that can fail so probably should return an
> > error code an have appropriate cleanup in here.
> >   
> >> +
> >> +	return 0;
> >> +}  
> > 
> > ...
> > .
> >   

Powered by blists - more mailing lists