| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220221120809.1531502-25-michael@walle.cc>
Date: Mon, 21 Feb 2022 13:08:01 +0100
From: Michael Walle <michael@...le.cc>
To: linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Tudor Ambarus <tudor.ambarus@...rochip.com>,
Pratyush Yadav <p.yadav@...com>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
yaliang.wang@...driver.com, Michael Walle <michael@...le.cc>
Subject: [PATCH v4 24/32] mtd: spi-nor: move all micron-st specifics into micron-st.c
The flag status register is only available on micron flashes. Move all
the functions around that into the micron module.
This is almost a mechanical move except for the spi_nor_fsr_ready()
which now also checks the normal status register. Previously, this was
done in spi_nor_ready().
Signed-off-by: Michael Walle <michael@...le.cc>
Reviewed-by: Pratyush Yadav <p.yadav@...com>
---
drivers/mtd/spi-nor/core.c | 123 +----------------------------
drivers/mtd/spi-nor/micron-st.c | 133 ++++++++++++++++++++++++++++++++
include/linux/mtd/spi-nor.h | 8 --
3 files changed, 134 insertions(+), 130 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index ae1560250c48..5b56d718692b 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -412,50 +412,6 @@ int spi_nor_read_sr(struct spi_nor *nor, u8 *sr)
return ret;
}
-/**
- * spi_nor_read_fsr() - Read the Flag Status Register.
- * @nor: pointer to 'struct spi_nor'
- * @fsr: pointer to a DMA-able buffer where the value of the
- * Flag Status Register will be written. Should be at least 2
- * bytes.
- *
- * Return: 0 on success, -errno otherwise.
- */
-static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 0),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_DATA_IN(1, fsr, 0));
-
- if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR) {
- op.addr.nbytes = nor->params->rdsr_addr_nbytes;
- op.dummy.nbytes = nor->params->rdsr_dummy;
- /*
- * We don't want to read only one byte in DTR mode. So,
- * read 2 and then discard the second byte.
- */
- op.data.nbytes = 2;
- }
-
- spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_RDFSR, fsr,
- 1);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d reading FSR\n", ret);
-
- return ret;
-}
-
/**
* spi_nor_read_cr() - Read the Configuration Register using the
* SPINOR_OP_RDCR (35h) command.
@@ -664,75 +620,6 @@ int spi_nor_sr_ready(struct spi_nor *nor)
return !(nor->bouncebuf[0] & SR_WIP);
}
-/**
- * spi_nor_clear_fsr() - Clear the Flag Status Register.
- * @nor: pointer to 'struct spi_nor'.
- */
-static void spi_nor_clear_fsr(struct spi_nor *nor)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 0),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_NO_DATA);
-
- spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLFSR,
- NULL, 0);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d clearing FSR\n", ret);
-}
-
-/**
- * spi_nor_fsr_ready() - Query the Flag Status Register to see if the flash is
- * ready for new commands.
- * @nor: pointer to 'struct spi_nor'.
- *
- * Return: 1 if ready, 0 if not ready, -errno on errors.
- */
-static int spi_nor_fsr_ready(struct spi_nor *nor)
-{
- int ret = spi_nor_read_fsr(nor, nor->bouncebuf);
-
- if (ret)
- return ret;
-
- if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
- if (nor->bouncebuf[0] & FSR_E_ERR)
- dev_err(nor->dev, "Erase operation failed.\n");
- else
- dev_err(nor->dev, "Program operation failed.\n");
-
- if (nor->bouncebuf[0] & FSR_PT_ERR)
- dev_err(nor->dev,
- "Attempted to modify a protected sector.\n");
-
- spi_nor_clear_fsr(nor);
-
- /*
- * WEL bit remains set to one when an erase or page program
- * error occurs. Issue a Write Disable command to protect
- * against inadvertent writes that can possibly corrupt the
- * contents of the memory.
- */
- ret = spi_nor_write_disable(nor);
- if (ret)
- return ret;
-
- return -EIO;
- }
-
- return !!(nor->bouncebuf[0] & FSR_READY);
-}
-
/**
* spi_nor_ready() - Query the flash to see if it is ready for new commands.
* @nor: pointer to 'struct spi_nor'.
@@ -741,19 +628,11 @@ static int spi_nor_fsr_ready(struct spi_nor *nor)
*/
static int spi_nor_ready(struct spi_nor *nor)
{
- int sr, fsr;
-
/* Flashes might override the standard routine. */
if (nor->params->ready)
return nor->params->ready(nor);
- sr = spi_nor_sr_ready(nor);
- if (sr < 0)
- return sr;
- fsr = nor->flags & SNOR_F_USE_FSR ? spi_nor_fsr_ready(nor) : 1;
- if (fsr < 0)
- return fsr;
- return sr && fsr;
+ return spi_nor_sr_ready(nor);
}
/**
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index 7a68f2ad3ea1..8877b122cf42 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -8,6 +8,8 @@
#include "core.h"
+#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */
+#define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */
#define SPINOR_OP_MT_DTR_RD 0xfd /* Fast Read opcode in DTR mode */
#define SPINOR_OP_MT_RD_ANY_REG 0x85 /* Read volatile register */
#define SPINOR_OP_MT_WR_ANY_REG 0x81 /* Write volatile register */
@@ -17,6 +19,12 @@
#define SPINOR_MT_OCT_DTR 0xe7 /* Enable Octal DTR. */
#define SPINOR_MT_EXSPI 0xff /* Enable Extended SPI (default) */
+/* Flag Status Register bits */
+#define FSR_READY BIT(7) /* Device status, 0 = Busy, 1 = Ready */
+#define FSR_E_ERR BIT(5) /* Erase operation status */
+#define FSR_P_ERR BIT(4) /* Program operation status */
+#define FSR_PT_ERR BIT(1) /* Protection error bit */
+
static int micron_st_nor_octal_dtr_enable(struct spi_nor *nor, bool enable)
{
struct spi_mem_op op;
@@ -273,6 +281,124 @@ static int micron_st_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable)
return spi_nor_write_disable(nor);
}
+/**
+ * spi_nor_read_fsr() - Read the Flag Status Register.
+ * @nor: pointer to 'struct spi_nor'
+ * @fsr: pointer to a DMA-able buffer where the value of the
+ * Flag Status Register will be written. Should be at least 2
+ * bytes.
+ *
+ * Return: 0 on success, -errno otherwise.
+ */
+static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 0),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_DATA_IN(1, fsr, 0));
+
+ if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR) {
+ op.addr.nbytes = nor->params->rdsr_addr_nbytes;
+ op.dummy.nbytes = nor->params->rdsr_dummy;
+ /*
+ * We don't want to read only one byte in DTR mode. So,
+ * read 2 and then discard the second byte.
+ */
+ op.data.nbytes = 2;
+ }
+
+ spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_RDFSR, fsr,
+ 1);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d reading FSR\n", ret);
+
+ return ret;
+}
+
+/**
+ * spi_nor_clear_fsr() - Clear the Flag Status Register.
+ * @nor: pointer to 'struct spi_nor'.
+ */
+static void spi_nor_clear_fsr(struct spi_nor *nor)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 0),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_NO_DATA);
+
+ spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLFSR,
+ NULL, 0);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d clearing FSR\n", ret);
+}
+
+/**
+ * spi_nor_fsr_ready() - Query the Flag Status Register to see if the flash is
+ * ready for new commands.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
+ */
+static int spi_nor_fsr_ready(struct spi_nor *nor)
+{
+ int sr_ready, ret;
+
+ sr_ready = spi_nor_sr_ready(nor);
+ if (sr_ready < 0)
+ return sr_ready;
+
+ ret = spi_nor_read_fsr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) {
+ if (nor->bouncebuf[0] & FSR_E_ERR)
+ dev_err(nor->dev, "Erase operation failed.\n");
+ else
+ dev_err(nor->dev, "Program operation failed.\n");
+
+ if (nor->bouncebuf[0] & FSR_PT_ERR)
+ dev_err(nor->dev,
+ "Attempted to modify a protected sector.\n");
+
+ spi_nor_clear_fsr(nor);
+
+ /*
+ * WEL bit remains set to one when an erase or page program
+ * error occurs. Issue a Write Disable command to protect
+ * against inadvertent writes that can possibly corrupt the
+ * contents of the memory.
+ */
+ ret = spi_nor_write_disable(nor);
+ if (ret)
+ return ret;
+
+ return -EIO;
+ }
+
+ return sr_ready && !!(nor->bouncebuf[0] & FSR_READY);
+}
+
static void micron_st_nor_default_init(struct spi_nor *nor)
{
nor->flags |= SNOR_F_HAS_LOCK;
@@ -281,8 +407,15 @@ static void micron_st_nor_default_init(struct spi_nor *nor)
nor->params->set_4byte_addr_mode = micron_st_nor_set_4byte_addr_mode;
}
+static void micron_st_nor_late_init(struct spi_nor *nor)
+{
+ if (nor->flags & SNOR_F_USE_FSR)
+ nor->params->ready = spi_nor_fsr_ready;
+}
+
static const struct spi_nor_fixups micron_st_nor_fixups = {
.default_init = micron_st_nor_default_init,
+ .late_init = micron_st_nor_late_init,
};
const struct spi_nor_manufacturer spi_nor_micron = {
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index b44b05a6f934..4622251a79ff 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -47,8 +47,6 @@
#define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */
#define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */
#define SPINOR_OP_RDCR 0x35 /* Read configuration register */
-#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */
-#define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */
#define SPINOR_OP_RDEAR 0xc8 /* Read Extended Address Register */
#define SPINOR_OP_WREAR 0xc5 /* Write Extended Address Register */
#define SPINOR_OP_SRSTEN 0x66 /* Software Reset Enable */
@@ -126,12 +124,6 @@
/* Enhanced Volatile Configuration Register bits */
#define EVCR_QUAD_EN_MICRON BIT(7) /* Micron Quad I/O */
-/* Flag Status Register bits */
-#define FSR_READY BIT(7) /* Device status, 0 = Busy, 1 = Ready */
-#define FSR_E_ERR BIT(5) /* Erase operation status */
-#define FSR_P_ERR BIT(4) /* Program operation status */
-#define FSR_PT_ERR BIT(1) /* Protection error bit */
-
/* Status Register 2 bits. */
#define SR2_QUAD_EN_BIT1 BIT(1)
#define SR2_LB1 BIT(3) /* Security Register Lock Bit 1 */
--
2.30.2
Powered by blists - more mailing lists