linux-kernel - Re: [PATCH v3 4/7] clk: qcom: Add A7 PLL support for SDX65

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <9fb3155e-e23e-fccd-7ab9-88f77de1bb78@quicinc.com>
Date:   Mon, 21 Feb 2022 12:57:51 +0530
From:   Rohit Agarwal <quic_rohiagar@...cinc.com>
To:     Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
CC:     <agross@...nel.org>, <bjorn.andersson@...aro.org>,
        <mturquette@...libre.com>, <sboyd@...nel.org>,
        <robh+dt@...nel.org>, <jassisinghbrar@...il.com>,
        <linux-arm-msm@...r.kernel.org>, <linux-clk@...r.kernel.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 4/7] clk: qcom: Add A7 PLL support for SDX65


On 2/21/2022 11:10 AM, Manivannan Sadhasivam wrote:
> On Mon, Feb 21, 2022 at 10:52:30AM +0530, Rohit Agarwal wrote:
>> Add support for PLL found in Qualcomm SDX65 platforms which is used to
>> provide clock to the Cortex A7 CPU via a mux. This PLL can provide high
>> frequency clock to the CPU above 1GHz as compared to the other sources
>> like GPLL0.
>>
>> In this driver, the power domain is attached to the cpudev. This is
>> required for CPUFreq functionality and there seems to be no better place
>> to do other than this driver (no dedicated CPUFreq driver).
>>
> This tells what the driver is doing but not essentially what this patch does
> i.e., you need to mention how the SDX65 PLL is added to the driver. Since you
> are reusing the existing driver, this needs to be mentioned.
Will update.
>> Signed-off-by: Rohit Agarwal <quic_rohiagar@...cinc.com>
>> ---
>>   drivers/clk/qcom/Kconfig  | 6 +++---
>>   drivers/clk/qcom/a7-pll.c | 1 +
>>   2 files changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index 42c8741..5159a1d 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -29,11 +29,11 @@ config QCOM_A53PLL
>>   	  devices.
>>   
>>   config QCOM_A7PLL
>> -	tristate "SDX55 A7 PLL"
>> +	tristate "A7 PLL driver for SDX55 and SDX65"
>>   	help
>> -	  Support for the A7 PLL on SDX55 devices. It provides the CPU with
>> +	  Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with
>>   	  frequencies above 1GHz.
>> -	  Say Y if you want to support higher CPU frequencies on SDX55
>> +	  Say Y if you want to support higher CPU frequencies on SDX55 and SDX65
>>   	  devices.
>>   
>>   config QCOM_CLK_APCS_MSM8916
>> diff --git a/drivers/clk/qcom/a7-pll.c b/drivers/clk/qcom/a7-pll.c
>> index c4a53e5..adb2121 100644
>> --- a/drivers/clk/qcom/a7-pll.c
>> +++ b/drivers/clk/qcom/a7-pll.c
>> @@ -84,6 +84,7 @@ static int qcom_a7pll_probe(struct platform_device *pdev)
>>   
>>   static const struct of_device_id qcom_a7pll_match_table[] = {
>>   	{ .compatible = "qcom,sdx55-a7pll" },
>> +	{ .compatible = "qcom,sdx65-a7pll" },
> I think here also you can just reuse the "qcom,sdx55-a7pll" compatible.
Ok, Will update. Thanks!
>
> Thanks,
> Mani
>
>>   	{ }
>>   };
>>   MODULE_DEVICE_TABLE(of, qcom_a7pll_match_table);
>> -- 
>> 2.7.4
>>