| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <803275d5-58f4-21d9-8020-e56f05737450@de.ibm.com>
Date: Tue, 22 Feb 2022 09:13:29 +0100
From: Christian Borntraeger <borntraeger@...ibm.com>
To: Michael Mueller <mimu@...ux.ibm.com>, kvm@...r.kernel.org
Cc: cohuck@...hat.com, frankja@...ux.ibm.com, thuth@...hat.com,
pasic@...ux.ibm.com, david@...hat.com, linux-s390@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/1] KVM: s390: pv: make use of ultravisor AIV support
Am 09.02.22 um 16:22 schrieb Michael Mueller:
> This patch enables the ultravisor adapter interruption vitualization
> support indicated by UV feature BIT_UV_FEAT_AIV. This allows ISC
> interruption injection directly into the GISA IPM for PV kvm guests.
>
> Hardware that does not support this feature will continue to use the
> UV interruption interception method to deliver ISC interruptions to
> PV kvm guests. For this purpose, the ECA_AIV bit for all guest cpus
> will be cleared and the GISA will be disabled during PV CPU setup.
>
> In addition a check in __inject_io() has been removed. That reduces the
> required instructions for interruption handling for PV and traditional
> kvm guests.
>
> Signed-off-by: Michael Mueller <mimu@...ux.ibm.com>
The CI said the following with gisa_disable in the calltrace.
Will drop from next for now.
LOCKDEP_CIRCULAR (suite: kvm-unit-tests-kvm, case: -)
WARNING: possible circular locking dependency detected
5.17.0-20220221.rc5.git1.b8f0356a093a.300.fc35.s390x+debug #1 Not tainted
------------------------------------------------------
qemu-system-s39/161139 is trying to acquire lock:
0000000280dc0b98 (&kvm->lock){+.+.}-{3:3}, at: kvm_s390_set_tod_clock+0x36/0x220 [kvm]
but task is already holding lock:
0000000280f4e4b8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x9a/0xa40 [kvm]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&vcpu->mutex){+.+.}-{3:3}:
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x250
lock_acquire+0xb0/0x200
__mutex_lock+0x9e/0x8a0
mutex_lock_nested+0x32/0x40
kvm_s390_gisa_disable+0xa4/0x130 [kvm]
kvm_s390_handle_pv+0x718/0x778 [kvm]
kvm_arch_vm_ioctl+0x4ac/0x5f8 [kvm]
kvm_vm_ioctl+0x336/0x530 [kvm]
__s390x_sys_ioctl+0xbe/0x100
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
-> #0 (&kvm->lock){+.+.}-{3:3}:
check_prev_add+0xe0/0xed8
validate_chain+0x736/0xb20
__lock_acquire+0x604/0xbd8
lock_acquire.part.0+0xe2/0x250
lock_acquire+0xb0/0x200
__mutex_lock+0x9e/0x8a0
mutex_lock_nested+0x32/0x40
kvm_s390_set_tod_clock+0x36/0x220 [kvm]
kvm_s390_handle_b2+0x378/0x728 [kvm]
kvm_handle_sie_intercept+0x13a/0x448 [kvm]
vcpu_post_run+0x28e/0x560 [kvm]
__vcpu_run+0x266/0x388 [kvm]
kvm_arch_vcpu_ioctl_run+0x10a/0x270 [kvm]
kvm_vcpu_ioctl+0x27c/0xa40 [kvm]
__s390x_sys_ioctl+0xbe/0x100
__do_syscall+0x1da/0x208
system_call+0x82/0xb0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&vcpu->mutex);
lock(&kvm->lock);
lock(&vcpu->mutex);
lock(&kvm->lock);
*** DEADLOCK ***
2 locks held by qemu-system-s39/161139:
#0: 0000000280f4e4b8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x9a/0xa40 [kvm]
#1: 0000000280dc47c8 (&kvm->srcu){....}-{0:0}, at: __vcpu_run+0x1d4/0x388 [kvm]
stack backtrace:
CPU: 10 PID: 161139 Comm: qemu-system-s39 Not tainted 5.17.0-20220221.rc5.git1.b8f0356a093a.300.fc35.s390x+debug #1
Hardware name: IBM 8561 T01 701 (LPAR)
Call Trace:
[<00000001da4e89de>] dump_stack_lvl+0x8e/0xc8
[<00000001d9876c56>] check_noncircular+0x136/0x158
[<00000001d9877c70>] check_prev_add+0xe0/0xed8
[<00000001d987919e>] validate_chain+0x736/0xb20
[<00000001d987b23c>] __lock_acquire+0x604/0xbd8
[<00000001d987c432>] lock_acquire.part.0+0xe2/0x250
[<00000001d987c650>] lock_acquire+0xb0/0x200
[<00000001da4f72ae>] __mutex_lock+0x9e/0x8a0
[<00000001da4f7ae2>] mutex_lock_nested+0x32/0x40
[<000003ff8070cd6e>] kvm_s390_set_tod_clock+0x36/0x220 [kvm]
[<000003ff8071dd68>] kvm_s390_handle_b2+0x378/0x728 [kvm]
[<000003ff8071146a>] kvm_handle_sie_intercept+0x13a/0x448 [kvm]
[<000003ff8070dd46>] vcpu_post_run+0x28e/0x560 [kvm]
[<000003ff8070e27e>] __vcpu_run+0x266/0x388 [kvm]
[<000003ff8070eba2>] kvm_arch_vcpu_ioctl_run+0x10a/0x270 [kvm]
[<000003ff806f4044>] kvm_vcpu_ioctl+0x27c/0xa40 [kvm]
[<00000001d9b47ac6>] __s390x_sys_ioctl+0xbe/0x100
[<00000001da4ec152>] __do_syscall+0x1da/0x208
[<00000001da4fec42>] system_call+0x82/0xb0
INFO: lockdep is turned off.
Powered by blists - more mailing lists