[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220222145854.358646-2-krzysztof.kozlowski@canonical.com>
Date: Tue, 22 Feb 2022 15:58:40 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Wei Xu <xuwei5@...ilicon.com>, Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Jan Kotas <jank@...ence.com>, Li Wei <liwei213@...wei.com>,
Stanley Chu <stanley.chu@...iatek.com>,
Yaniv Gardi <ygardi@...eaurora.org>,
linux-scsi@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org,
linux-mediatek@...ts.infradead.org
Subject: [PATCH v2 01/15] dt-bindings: ufs: add common platform bindings
Add bindings for common parts (platform) of Universal Flash Storage
(UFS) Host Controllers in dtschema format.
The 'freq-table-hz' is not correct in dtschema, because '-hz' suffix
defines uint32 type, not an array. Therefore deprecate 'freq-table-hz'
and use 'freq-table' instead.
Include also the bindings directory in UFS maintainers entry.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
---
.../devicetree/bindings/ufs/ti,j721e-ufs.yaml | 2 +-
.../devicetree/bindings/ufs/ufs-common.yaml | 88 +++++++++++++++++++
MAINTAINERS | 1 +
3 files changed, 90 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/ufs/ufs-common.yaml
diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
index 4d13e6bc1c50..dc93fe2d3458 100644
--- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
@@ -80,7 +80,7 @@ examples:
compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
reg = <0x0 0x4000 0x0 0x10000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- freq-table-hz = <19200000 19200000>;
+ freq-table = <19200000 19200000>;
power-domains = <&k3_pds 277>;
clocks = <&k3_clks 277 1>;
assigned-clocks = <&k3_clks 277 1>;
diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
new file mode 100644
index 000000000000..85c73d2853e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ufs/ufs-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for Universal Flash Storage (UFS) Host Controllers
+
+maintainers:
+ - Alim Akhtar <alim.akhtar@...sung.com>
+ - Avri Altman <avri.altman@....com>
+
+properties:
+ clocks: true
+
+ clock-names: true
+
+ freq-table-hz:
+ deprecated: true
+ description:
+ Use freq-table.
+
+ freq-table:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: Minimum frequency for given clock
+ - description: Maximum frequency for given clock
+ description: |
+ Array of <min max> operating frequencies in Hz stored in the same order
+ as the clocks property. If this property is not defined or a value in the
+ array is "0" then it is assumed that the frequency is set by the parent
+ clock or a fixed rate clock source.
+
+ interrupts:
+ maxItems: 1
+
+ lanes-per-direction:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2]
+ default: 2
+ description:
+ Number of lanes available per direction. Note that it is assume same
+ number of lanes is used both directions at once.
+
+ vdd-hba-supply:
+ description:
+ Phandle to UFS host controller supply regulator node.
+
+ vcc-supply:
+ description:
+ Phandle to VCC supply regulator node.
+
+ vccq-supply:
+ description:
+ Phandle to VCCQ supply regulator node.
+
+ vccq2-supply:
+ description:
+ Phandle to VCCQ2 supply regulator node.
+
+ vcc-supply-1p8:
+ type: boolean
+ description:
+ For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This
+ boolean property when set, specifies to use low voltage range of
+ 1.7-1.95V. Note for external UFS cards this property is invalid and valid
+ VCC range is always 2.7-3.6V.
+
+ vcc-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCC supply.
+
+ vccq-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCCQ supply.
+
+ vccq2-max-microamp:
+ description:
+ Specifies max. load that can be drawn from VCCQ2 supply.
+
+dependencies:
+ freq-table: [ 'clocks' ]
+
+required:
+ - interrupts
+
+additionalProperties: true
diff --git a/MAINTAINERS b/MAINTAINERS
index aa0f6cbb634e..c2cff57d32f8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20015,6 +20015,7 @@ R: Alim Akhtar <alim.akhtar@...sung.com>
R: Avri Altman <avri.altman@....com>
L: linux-scsi@...r.kernel.org
S: Supported
+F: Documentation/devicetree/bindings/ufs/
F: Documentation/scsi/ufs.rst
F: drivers/scsi/ufs/
--
2.32.0
Powered by blists - more mailing lists