linux-kernel - Re: [PATCH v4 4/4] pmbus (pli1209bc): Add regulator support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20220224192550.GA1942763@roeck-us.net>
Date:   Thu, 24 Feb 2022 11:25:50 -0800
From:   Guenter Roeck <linux@...ck-us.net>
To:     Marcello Sylvester Bauer <sylv@...v.io>
Cc:     Jean Delvare <jdelvare@...e.com>, linux-kernel@...r.kernel.org,
        linux-hwmon@...r.kernel.org,
        Patrick Rudolph <patrick.rudolph@...ements.com>
Subject: Re: [PATCH v4 4/4] pmbus (pli1209bc): Add regulator support

On Mon, Feb 21, 2022 at 10:42:07AM +0100, Marcello Sylvester Bauer wrote:
> Add regulator support for PLI1209BC Digital Supervisor.
> 
> Signed-off-by: Marcello Sylvester Bauer <sylv@...v.io>

Applied to hwmon-next.

Thanks,
Guenter

> ---
>  drivers/hwmon/pmbus/Kconfig     |  7 +++++++
>  drivers/hwmon/pmbus/pli1209bc.c | 31 +++++++++++++++++++++++++++++++
>  2 files changed, 38 insertions(+)
> 
> diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
> index f18f67a94697..6552467c588d 100644
> --- a/drivers/hwmon/pmbus/Kconfig
> +++ b/drivers/hwmon/pmbus/Kconfig
> @@ -326,6 +326,13 @@ config SENSORS_PLI1209BC
>  	  This driver can also be built as a module. If so, the module will
>  	  be called pli1209bc.
>  
> +config SENSORS_PLI1209BC_REGULATOR
> +	bool "Regulator support for PLI1209BC"
> +	depends on SENSORS_PLI1209BC && REGULATOR
> +	help
> +	  If you say yes here you get regulator support for Vicor PLI1209BC
> +	  Digital Supervisor.
> +
>  config SENSORS_PM6764TR
>  	tristate "ST PM6764TR"
>  	help
> diff --git a/drivers/hwmon/pmbus/pli1209bc.c b/drivers/hwmon/pmbus/pli1209bc.c
> index 5f8847307e55..05b4ee35ba27 100644
> --- a/drivers/hwmon/pmbus/pli1209bc.c
> +++ b/drivers/hwmon/pmbus/pli1209bc.c
> @@ -8,6 +8,7 @@
>  #include <linux/i2c.h>
>  #include <linux/module.h>
>  #include <linux/pmbus.h>
> +#include <linux/regulator/driver.h>
>  #include "pmbus.h"
>  
>  /*
> @@ -33,11 +34,37 @@ static int pli1209bc_read_word_data(struct i2c_client *client, int page,
>  			return data;
>  		data = sign_extend32(data, 15) * 10;
>  		return clamp_val(data, -32768, 32767) & 0xffff;
> +	/*
> +	 * PMBUS_READ_VOUT and PMBUS_READ_TEMPERATURE_1 return invalid data
> +	 * when the BCM is turned off. Since it is not possible to return
> +	 * ENODATA error, return zero instead.
> +	 */
> +	case PMBUS_READ_VOUT:
> +	case PMBUS_READ_TEMPERATURE_1:
> +		data = pmbus_read_word_data(client, page, phase,
> +					    PMBUS_STATUS_WORD);
> +		if (data < 0)
> +			return data;
> +		if (data & PB_STATUS_POWER_GOOD_N)
> +			return 0;
> +		return pmbus_read_word_data(client, page, phase, reg);
>  	default:
>  		return -ENODATA;
>  	}
>  }
>  
> +#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
> +static const struct regulator_desc pli1209bc_reg_desc = {
> +	.name = "vout2",
> +	.id = 1,
> +	.of_match = of_match_ptr("vout2"),
> +	.regulators_node = of_match_ptr("regulators"),
> +	.ops = &pmbus_regulator_ops,
> +	.type = REGULATOR_VOLTAGE,
> +	.owner = THIS_MODULE,
> +};
> +#endif
> +
>  static struct pmbus_driver_info pli1209bc_info = {
>  	.pages = 2,
>  	.format[PSC_VOLTAGE_IN] = direct,
> @@ -75,6 +102,10 @@ static struct pmbus_driver_info pli1209bc_info = {
>  	    | PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
>  	    | PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_INPUT,
>  	.read_word_data = pli1209bc_read_word_data,
> +#if IS_ENABLED(CONFIG_SENSORS_PLI1209BC_REGULATOR)
> +	.num_regulators = 1,
> +	.reg_desc = &pli1209bc_reg_desc,
> +#endif
>  };
>  
>  static int pli1209bc_probe(struct i2c_client *client)