Message-ID: <5fa0a22c-5f55-bd38-8d76-a4ea31898bca@roeck-us.net>
Date:   Thu, 24 Feb 2022 11:57:47 -0800
From:   Guenter Roeck <linux@...ck-us.net>
To:     Aleksa Savic <savicaleksa83@...il.com>, linux-hwmon@...r.kernel.org
Cc:     Jean Delvare <jdelvare@...e.com>, Jonathan Corbet <corbet@....net>,
        linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] hwmon: add driver for Aquacomputer Farbwerk 360

Hi,

On 2/21/22 02:21, Aleksa Savic wrote:
> This driver exposes hardware temperature sensors of the Aquacomputer
> Farbwerk 360 RGB controller, which communicates through a proprietary
> USB HID protocol.
> 
> Four temperature sensors are available. If a sensor is not connected,
> it will report zeroes. Additionally, serial number and firmware version
> are exposed through debugfs.
> 
> This driver has been tested on x86_64.
> 
> Signed-off-by: Aleksa Savic <savicaleksa83@...il.com>

Unless I amm missing something, this driver is quite similar to the
d5next driver (drivers/hwmon/aquacomputer_d5next.c), except that there
are 4 instead of 1 temperature sensor, the sensor data is in a different place,
and there is _only_ temperature data. It should be quite straightforward
to merge the two drivers into one, so please  do that.

Additional comment inline.

Thanks,
Guenter

> ---
>   .../hwmon/aquacomputer_farbwerk360.rst        |  40 +++
>   Documentation/hwmon/index.rst                 |   1 +
>   MAINTAINERS                                   |   7 +
>   drivers/hwmon/Kconfig                         |  10 +
>   drivers/hwmon/Makefile                        |   1 +
>   drivers/hwmon/aquacomputer_farbwerk360.c      | 261 ++++++++++++++++++
>   6 files changed, 320 insertions(+)
>   create mode 100644 Documentation/hwmon/aquacomputer_farbwerk360.rst
>   create mode 100644 drivers/hwmon/aquacomputer_farbwerk360.c
> 
> diff --git a/Documentation/hwmon/aquacomputer_farbwerk360.rst b/Documentation/hwmon/aquacomputer_farbwerk360.rst
> new file mode 100644
> index 000000000000..cebaffccd818
> --- /dev/null
> +++ b/Documentation/hwmon/aquacomputer_farbwerk360.rst
> @@ -0,0 +1,40 @@
> +.. SPDX-License-Identifier: GPL-2.0-or-later
> +
> +Kernel driver aquacomputer_farbwerk360
> +======================================
> +
> +Supported devices:
> +
> +* Aquacomputer Farbwerk 360 RGB controller
> +
> +Author: Aleksa Savic
> +
> +Description
> +-----------
> +
> +This driver exposes hardware temperature sensors of the Aquacomputer Farbwerk 360
> +RGB controller, which communicates through a proprietary USB HID protocol.
> +
> +Four temperature sensors are available. If a sensor is not connected, it will report
> +zeroes. Additionally, serial number and firmware version are exposed through debugfs.
> +
> +Usage notes
> +-----------
> +
> +Farbwerk 360 communicates via HID reports. The driver is loaded automatically by
> +the kernel and supports hotswapping.
> +
> +Sysfs entries
> +-------------
> +
> +=============== ==============================================
> +temp[1-4]_input Measured temperature (in millidegrees Celsius)
> +=============== ==============================================
> +
> +Debugfs entries
> +---------------
> +
> +================ ===============================================
> +serial_number    Serial number of the pump
> +firmware_version Version of installed firmware
> +================ ===============================================
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index df20022c741f..42b7369340ba 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -40,6 +40,7 @@ Hardware Monitoring Kernel Drivers
>      aht10
>      amc6821
>      aquacomputer_d5next
> +   aquacomputer_farbwerk360
>      asb100
>      asc7621
>      aspeed-pwm-tacho
> diff --git a/MAINTAINERS b/MAINTAINERS
> index bd86ed9fbc79..fb8b8d7aebbc 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1386,6 +1386,13 @@ S:	Maintained
>   F:	Documentation/hwmon/aquacomputer_d5next.rst
>   F:	drivers/hwmon/aquacomputer_d5next.c
>   
> +AQUACOMPUTER FARBWERK 360 RGB CONTROLLER SENSOR DRIVER
> +M:	Aleksa Savic <savicaleksa83@...il.com>
> +L:	linux-hwmon@...r.kernel.org
> +S:	Maintained
> +F:	Documentation/hwmon/aquacomputer_farbwerk360.rst
> +F:	drivers/hwmon/aquacomputer_farbwerk360.c
> +
>   AQUANTIA ETHERNET DRIVER (atlantic)
>   M:	Igor Russkikh <irusskikh@...vell.com>
>   L:	netdev@...r.kernel.org
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 8df25f1079ba..e1ca5e1e6ab0 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -264,6 +264,16 @@ config SENSORS_AQUACOMPUTER_D5NEXT
>   	  This driver can also be built as a module. If so, the module
>   	  will be called aquacomputer_d5next.
>   
> +config SENSORS_AQUACOMPUTER_FARBWERK360
> +	tristate "Aquacomputer Farbwerk 360 RGB controller"
> +	depends on USB_HID
> +	help
> +	  If you say yes here you get support for temperature sensors provided by
> +	  the Aquacomputer Farbwerk 360 RGB controller.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called aquacomputer_farbwerk360.
> +
>   config SENSORS_AS370
>   	tristate "Synaptics AS370 SoC hardware monitoring driver"
>   	help
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 185f946d698b..1c1556a53f6d 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_SENSORS_ADT7475)	+= adt7475.o
>   obj-$(CONFIG_SENSORS_AHT10)	+= aht10.o
>   obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
>   obj-$(CONFIG_SENSORS_AQUACOMPUTER_D5NEXT) += aquacomputer_d5next.o
> +obj-$(CONFIG_SENSORS_AQUACOMPUTER_FARBWERK360) += aquacomputer_farbwerk360.o
>   obj-$(CONFIG_SENSORS_ARM_SCMI)	+= scmi-hwmon.o
>   obj-$(CONFIG_SENSORS_ARM_SCPI)	+= scpi-hwmon.o
>   obj-$(CONFIG_SENSORS_AS370)	+= as370-hwmon.o
> diff --git a/drivers/hwmon/aquacomputer_farbwerk360.c b/drivers/hwmon/aquacomputer_farbwerk360.c
> new file mode 100644
> index 000000000000..14b760a2c8a8
> --- /dev/null
> +++ b/drivers/hwmon/aquacomputer_farbwerk360.c
> @@ -0,0 +1,261 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * hwmon driver for Aquacomputer Farbwerk 360 (RGB controller)
> + *
> + * The Farbwerk 360 sends HID reports (with ID 0x01) every second to report sensor values
> + * of up to four connected temperature sensors.
> + *
> + * Copyright 2022 Aleksa Savic <savicaleksa83@...il.com>
> + */
> +
> +#include <asm/unaligned.h>

asm includes should be last (ah, my bad, this is from the d5 driver.
but still, just for the future).

> +#include <linux/debugfs.h>
> +#include <linux/hid.h>
> +#include <linux/hwmon.h>
> +#include <linux/jiffies.h>
> +#include <linux/module.h>
> +#include <linux/seq_file.h>
> +
> +#define DRIVER_NAME		"aquacomputer_farbwerk360"
> +
> +#define STATUS_REPORT_ID	0x01
> +#define STATUS_UPDATE_INTERVAL	(2 * HZ) /* In seconds */
> +
> +/* Register offsets */
> +#define SERIAL_FIRST_PART	0x03
> +#define SERIAL_SECOND_PART	0x05
> +#define FIRMWARE_VERSION	0x0D
> +
> +#define NUM_SENSORS		4
> +#define SENSOR_START		0x32
> +#define SENSOR_SIZE		0x02
> +#define SENSOR_DISCONNECTED	0x7FFF
> +
> +static const char *const label_temps[] = { "Sensor 1", "Sensor 2", "Sensor 3", "Sensor 4" };
> +
> +struct farbwerk360_data {
> +	struct hid_device *hdev;
> +	struct device *hwmon_dev;
> +	struct dentry *debugfs;
> +	s32 temp_input[4];
> +	u32 serial_number[2];
> +	u16 firmware_version;
> +	unsigned long updated;
> +};
> +
> +static umode_t farbwerk360_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
> +				      int channel)
> +{
> +	return 0444;
> +}
> +
> +static int farbwerk360_read(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel,
> +			    long *val)
> +{
> +	struct farbwerk360_data *priv = dev_get_drvdata(dev);
> +
> +	if (time_after(jiffies, priv->updated + STATUS_UPDATE_INTERVAL))
> +		return -ENODATA;
> +
> +	switch (type) {
> +	case hwmon_temp:
> +		*val = priv->temp_input[channel];
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	return 0;
> +}
> +
> +static int farbwerk360_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
> +				   int channel, const char **str)
> +{
> +	switch (type) {
> +	case hwmon_temp:
> +		*str = label_temps[channel];
> +		break;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct hwmon_ops farbwerk360_hwmon_ops = {
> +	.is_visible = farbwerk360_is_visible,
> +	.read = farbwerk360_read,
> +	.read_string = farbwerk360_read_string,
> +};
> +
> +static const struct hwmon_channel_info *farbwerk360_info[] = {
> +	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL,
> +			   HWMON_T_INPUT | HWMON_T_LABEL, HWMON_T_INPUT | HWMON_T_LABEL),
> +	NULL
> +};
> +
> +static const struct hwmon_chip_info farbwerk360_chip_info = {
> +	.ops = &farbwerk360_hwmon_ops,
> +	.info = farbwerk360_info,
> +};
> +
> +static int farbwerk360_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
> +				 int size)
> +{
> +	int i, sensor_value;
> +	struct farbwerk360_data *priv;
> +
> +	if (report->id != STATUS_REPORT_ID)
> +		return 0;
> +
> +	priv = hid_get_drvdata(hdev);
> +
> +	/* Info provided with every report */
> +	priv->serial_number[0] = get_unaligned_be16(data + SERIAL_FIRST_PART);
> +	priv->serial_number[1] = get_unaligned_be16(data + SERIAL_SECOND_PART);
> +
> +	priv->firmware_version = get_unaligned_be16(data + FIRMWARE_VERSION);
> +
> +	/* Temperature sensor readings */
> +	for (i = 0; i < NUM_SENSORS; i++) {
> +		sensor_value = get_unaligned_be16(data + SENSOR_START + i * SENSOR_SIZE);
> +		if (sensor_value == SENSOR_DISCONNECTED)
> +			sensor_value = 0;

If it is known that a sensor is disconnected, it would make
more sense to report -ENODATA when it is read instead of a
temperature of 0 degrees.

> +
> +		priv->temp_input[i] = sensor_value * 10;
> +	}
> +
> +	priv->updated = jiffies;
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_DEBUG_FS
> +
> +static int serial_number_show(struct seq_file *seqf, void *unused)
> +{
> +	struct farbwerk360_data *priv = seqf->private;
> +
> +	seq_printf(seqf, "%05u-%05u\n", priv->serial_number[0], priv->serial_number[1]);
> +
> +	return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(serial_number);
> +
> +static int firmware_version_show(struct seq_file *seqf, void *unused)
> +{
> +	struct farbwerk360_data *priv = seqf->private;
> +
> +	seq_printf(seqf, "%u\n", priv->firmware_version);
> +
> +	return 0;
> +}
> +DEFINE_SHOW_ATTRIBUTE(firmware_version);
> +
> +static void farbwerk360_debugfs_init(struct farbwerk360_data *priv)
> +{
> +	char name[32];
> +
> +	scnprintf(name, sizeof(name), "%s-%s", DRIVER_NAME, dev_name(&priv->hdev->dev));
> +
> +	priv->debugfs = debugfs_create_dir(name, NULL);
> +	debugfs_create_file("serial_number", 0444, priv->debugfs, priv, &serial_number_fops);
> +	debugfs_create_file("firmware_version", 0444, priv->debugfs, priv, &firmware_version_fops);
> +}
> +
> +#else
> +
> +static void farbwerk360_debugfs_init(struct farbwerk360_data *priv)
> +{
> +}
> +
> +#endif
> +
> +static int farbwerk360_probe(struct hid_device *hdev, const struct hid_device_id *id)
> +{
> +	int ret;
> +	struct farbwerk360_data *priv;
> +
> +	priv = devm_kzalloc(&hdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->hdev = hdev;
> +	hid_set_drvdata(hdev, priv);
> +
> +	priv->updated = jiffies - STATUS_UPDATE_INTERVAL;
> +
> +	ret = hid_parse(hdev);
> +	if (ret)
> +		return ret;
> +
> +	ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW);
> +	if (ret)
> +		return ret;
> +
> +	ret = hid_hw_open(hdev);
> +	if (ret)
> +		goto fail_and_stop;
> +
> +	priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "farbwerk360", priv,
> +							  &farbwerk360_chip_info, NULL);
> +
> +	if (IS_ERR(priv->hwmon_dev)) {
> +		ret = PTR_ERR(priv->hwmon_dev);
> +		goto fail_and_close;
> +	}
> +
> +	farbwerk360_debugfs_init(priv);
> +
> +	return 0;
> +
> +fail_and_close:
> +	hid_hw_close(hdev);
> +fail_and_stop:
> +	hid_hw_stop(hdev);
> +	return ret;
> +}
> +
> +static void farbwerk360_remove(struct hid_device *hdev)
> +{
> +	struct farbwerk360_data *priv = hid_get_drvdata(hdev);
> +
> +	debugfs_remove_recursive(priv->debugfs);
> +	hwmon_device_unregister(priv->hwmon_dev);
> +
> +	hid_hw_close(hdev);
> +	hid_hw_stop(hdev);
> +}
> +
> +static const struct hid_device_id farbwerk360_table[] = {
> +	{ HID_USB_DEVICE(0x0c70, 0xf010) }, /* Aquacomputer Farbwerk 360 */
> +	{},
> +};
> +
> +MODULE_DEVICE_TABLE(hid, farbwerk360_table);
> +
> +static struct hid_driver farbwerk360_driver = {
> +	.name = DRIVER_NAME,
> +	.id_table = farbwerk360_table,
> +	.probe = farbwerk360_probe,
> +	.remove = farbwerk360_remove,
> +	.raw_event = farbwerk360_raw_event,
> +};
> +
> +static int __init farbwerk360_init(void)
> +{
> +	return hid_register_driver(&farbwerk360_driver);
> +}
> +
> +static void __exit farbwerk360_exit(void)
> +{
> +	hid_unregister_driver(&farbwerk360_driver);
> +}
> +
> +/* Request to initialize after the HID bus to ensure it's not being loaded before */
> +late_initcall(farbwerk360_init);
> +module_exit(farbwerk360_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Aleksa Savic <savicaleksa83@...il.com>");
> +MODULE_DESCRIPTION("Hwmon driver for Aquacomputer Farbwerk 360");

Powered by blists - more mailing lists