| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8cf9304d9941c25d920c4835cbc624ff5c2ac2cb.1644824638.git.quic_saipraka@quicinc.com>
Date: Thu, 24 Feb 2022 11:37:07 +0530
From: Sai Prakash Ranjan <quic_saipraka@...cinc.com>
To: Will Deacon <will@...nel.org>,
Catalin Marinas <catalin.marinas@....com>,
Arnd Bergmann <arnd@...db.de>,
Steven Rostedt <rostedt@...dmis.org>,
"Marc Zyngier" <maz@...nel.org>
CC: Trilok Soni <quic_tsoni@...cinc.com>, <quic_psodagud@...cinc.com>,
gregkh <gregkh@...uxfoundation.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-msm@...r.kernel.org>,
"Prasad Sodagudi" <psodagud@...eaurora.org>,
Sai Prakash Ranjan <quic_saipraka@...cinc.com>
Subject: [PATCHv10 5/6] lib: Add register read/write tracing support
From: Prasad Sodagudi <psodagud@...eaurora.org>
Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors
are typically used to read/write from/to memory mapped registers
and can cause hangs or some undefined behaviour in following few
cases,
* If the access to the register space is unclocked, for example: if
there is an access to multimedia(MM) block registers without MM
clocks.
* If the register space is protected and not set to be accessible from
non-secure world, for example: only EL3 (EL: Exception level) access
is allowed and any EL2/EL1 access is forbidden.
* If xPU(memory/register protection units) is controlling access to
certain memory/register space for specific clients.
and more...
Such cases usually results in instant reboot/SErrors/NOC or interconnect
hangs and tracing these register accesses can be very helpful to debug
such issues during initial development stages and also in later stages.
So use ftrace trace events to log such MMIO register accesses which
provides rich feature set such as early enablement of trace events,
filtering capability, dumping ftrace logs on console and many more.
Sample output:
rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610
rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610
Signed-off-by: Prasad Sodagudi <psodagud@...eaurora.org>
Co-developed-by: Sai Prakash Ranjan <quic_saipraka@...cinc.com>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@...cinc.com>
---
arch/Kconfig | 3 ++
arch/arm64/Kconfig | 1 +
include/trace/events/rwmmio.h | 97 +++++++++++++++++++++++++++++++++++
lib/Kconfig | 7 +++
lib/Makefile | 2 +
lib/trace_readwrite.c | 47 +++++++++++++++++
6 files changed, 157 insertions(+)
create mode 100644 include/trace/events/rwmmio.h
create mode 100644 lib/trace_readwrite.c
diff --git a/arch/Kconfig b/arch/Kconfig
index 678a80713b21..efbbc36658dc 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -1315,6 +1315,9 @@ config ARCH_HAS_ELFCORE_COMPAT
config ARCH_HAS_PARANOID_L1D_FLUSH
bool
+config ARCH_HAVE_TRACE_MMIO_ACCESS
+ bool
+
config DYNAMIC_SIGFRAME
bool
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 09b885cc4db5..321ae97df987 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -46,6 +46,7 @@ config ARM64
select ARCH_HAS_ZONE_DMA_SET if EXPERT
select ARCH_HAVE_ELF_PROT
select ARCH_HAVE_NMI_SAFE_CMPXCHG
+ select ARCH_HAVE_TRACE_MMIO_ACCESS
select ARCH_INLINE_READ_LOCK if !PREEMPTION
select ARCH_INLINE_READ_LOCK_BH if !PREEMPTION
select ARCH_INLINE_READ_LOCK_IRQ if !PREEMPTION
diff --git a/include/trace/events/rwmmio.h b/include/trace/events/rwmmio.h
new file mode 100644
index 000000000000..3c3fefbef87d
--- /dev/null
+++ b/include/trace/events/rwmmio.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM rwmmio
+
+#if !defined(_TRACE_RWMMIO_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_RWMMIO_H
+
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(rwmmio_rw_template,
+
+ TP_PROTO(unsigned long caller, u64 val, u8 width, volatile void __iomem *addr),
+
+ TP_ARGS(caller, val, width, addr),
+
+ TP_STRUCT__entry(
+ __field(u64, caller)
+ __field(u64, val)
+ __field(u64, addr)
+ __field(u8, width)
+ ),
+
+ TP_fast_assign(
+ __entry->caller = caller;
+ __entry->val = val;
+ __entry->addr = (unsigned long)(void *)addr;
+ __entry->width = width;
+ ),
+
+ TP_printk("%pS width=%d val=%#llx addr=%#llx",
+ (void *)(unsigned long)__entry->caller, __entry->width,
+ __entry->val, __entry->addr)
+);
+
+DEFINE_EVENT(rwmmio_rw_template, rwmmio_write,
+ TP_PROTO(unsigned long caller, u64 val, u8 width, volatile void __iomem *addr),
+ TP_ARGS(caller, val, width, addr)
+);
+
+DEFINE_EVENT(rwmmio_rw_template, rwmmio_post_write,
+ TP_PROTO(unsigned long caller, u64 val, u8 width, volatile void __iomem *addr),
+ TP_ARGS(caller, val, width, addr)
+);
+
+TRACE_EVENT(rwmmio_read,
+
+ TP_PROTO(unsigned long caller, u8 width, const volatile void __iomem *addr),
+
+ TP_ARGS(caller, width, addr),
+
+ TP_STRUCT__entry(
+ __field(u64, caller)
+ __field(u64, addr)
+ __field(u8, width)
+ ),
+
+ TP_fast_assign(
+ __entry->caller = caller;
+ __entry->addr = (unsigned long)(void *)addr;
+ __entry->width = width;
+ ),
+
+ TP_printk("%pS width=%d addr=%#llx",
+ (void *)(unsigned long)__entry->caller, __entry->width, __entry->addr)
+);
+
+TRACE_EVENT(rwmmio_post_read,
+
+ TP_PROTO(unsigned long caller, u64 val, u8 width, const volatile void __iomem *addr),
+
+ TP_ARGS(caller, val, width, addr),
+
+ TP_STRUCT__entry(
+ __field(u64, caller)
+ __field(u64, val)
+ __field(u64, addr)
+ __field(u8, width)
+ ),
+
+ TP_fast_assign(
+ __entry->caller = caller;
+ __entry->val = val;
+ __entry->addr = (unsigned long)(void *)addr;
+ __entry->width = width;
+ ),
+
+ TP_printk("%pS width=%d val=%#llx addr=%#llx",
+ (void *)(unsigned long)__entry->caller, __entry->width,
+ __entry->val, __entry->addr)
+);
+
+#endif /* _TRACE_RWMMIO_H */
+
+#include <trace/define_trace.h>
diff --git a/lib/Kconfig b/lib/Kconfig
index c80fde816a7e..ea520c315c0f 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -119,6 +119,13 @@ config INDIRECT_IOMEM_FALLBACK
mmio accesses when the IO memory address is not a registered
emulated region.
+config TRACE_MMIO_ACCESS
+ bool "Register read/write tracing"
+ depends on TRACING && ARCH_HAVE_TRACE_MMIO_ACCESS
+ help
+ Create tracepoints for MMIO read/write operations. These trace events
+ can be used for logging all MMIO read/write operations.
+
source "lib/crypto/Kconfig"
config CRC_CCITT
diff --git a/lib/Makefile b/lib/Makefile
index 300f569c626b..43813b0061cd 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -152,6 +152,8 @@ lib-y += logic_pio.o
lib-$(CONFIG_INDIRECT_IOMEM) += logic_iomem.o
+obj-$(CONFIG_TRACE_MMIO_ACCESS) += trace_readwrite.o
+
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_BTREE) += btree.o
diff --git a/lib/trace_readwrite.c b/lib/trace_readwrite.c
new file mode 100644
index 000000000000..88637038b30c
--- /dev/null
+++ b/lib/trace_readwrite.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Register read and write tracepoints
+ *
+ * Copyright (c) 2021-2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/ftrace.h>
+#include <linux/module.h>
+#include <asm-generic/io.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/rwmmio.h>
+
+#ifdef CONFIG_TRACE_MMIO_ACCESS
+void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr,
+ unsigned long caller_addr)
+{
+ trace_rwmmio_write(caller_addr, val, width, addr);
+}
+EXPORT_SYMBOL_GPL(log_write_mmio);
+EXPORT_TRACEPOINT_SYMBOL_GPL(rwmmio_write);
+
+void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr,
+ unsigned long caller_addr)
+{
+ trace_rwmmio_post_write(caller_addr, val, width, addr);
+}
+EXPORT_SYMBOL_GPL(log_post_write_mmio);
+EXPORT_TRACEPOINT_SYMBOL_GPL(rwmmio_post_write);
+
+void log_read_mmio(u8 width, const volatile void __iomem *addr,
+ unsigned long caller_addr)
+{
+ trace_rwmmio_read(caller_addr, width, addr);
+}
+EXPORT_SYMBOL_GPL(log_read_mmio);
+EXPORT_TRACEPOINT_SYMBOL_GPL(rwmmio_read);
+
+void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr,
+ unsigned long caller_addr)
+{
+ trace_rwmmio_post_read(caller_addr, val, width, addr);
+}
+EXPORT_SYMBOL_GPL(log_post_read_mmio);
+EXPORT_TRACEPOINT_SYMBOL_GPL(rwmmio_post_read);
+#endif /* CONFIG_TRACE_MMIO_ACCESS */
--
2.33.1
Powered by blists - more mailing lists