| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220224111028.20917-5-jslaby@suse.cz>
Date: Thu, 24 Feb 2022 12:10:27 +0100
From: Jiri Slaby <jslaby@...e.cz>
To: gregkh@...uxfoundation.org
Cc: linux-serial@...r.kernel.org, linux-kernel@...r.kernel.org,
Jiri Slaby <jslaby@...e.cz>,
Russell King <linux@...linux.org.uk>
Subject: [PATCH 4/5] tty: serial: amba-pl010: use more uart_port pointers
The code uses uart_amba_port::port on many places. Sometimes it even
needs not uart_amba_port itself. So simplify the code on many places
and remove the need of uart_amba_port on some places completely.
No functional changes intended. The objdump -d output shows only a code
move in pl010_rx_chars().
Signed-off-by: Jiri Slaby <jslaby@...e.cz>
Cc: Russell King <linux@...linux.org.uk>
---
drivers/tty/serial/amba-pl010.c | 174 +++++++++++++++-----------------
1 file changed, 84 insertions(+), 90 deletions(-)
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 896f66cacf8b..fae0b581ff42 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -110,38 +110,38 @@ static void pl010_enable_ms(struct uart_port *port)
writel(cr, uap->port.membase + UART010_CR);
}
-static void pl010_rx_chars(struct uart_amba_port *uap)
+static void pl010_rx_chars(struct uart_port *port)
{
unsigned int status, ch, flag, rsr, max_count = 256;
- status = readb(uap->port.membase + UART01x_FR);
+ status = readb(port->membase + UART01x_FR);
while (UART_RX_DATA(status) && max_count--) {
- ch = readb(uap->port.membase + UART01x_DR);
+ ch = readb(port->membase + UART01x_DR);
flag = TTY_NORMAL;
- uap->port.icount.rx++;
+ port->icount.rx++;
/*
* Note that the error handling code is
* out of the main execution path
*/
- rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
+ rsr = readb(port->membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
if (unlikely(rsr & UART01x_RSR_ANY)) {
- writel(0, uap->port.membase + UART01x_ECR);
+ writel(0, port->membase + UART01x_ECR);
if (rsr & UART01x_RSR_BE) {
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
- uap->port.icount.brk++;
- if (uart_handle_break(&uap->port))
+ port->icount.brk++;
+ if (uart_handle_break(port))
goto ignore_char;
} else if (rsr & UART01x_RSR_PE)
- uap->port.icount.parity++;
+ port->icount.parity++;
else if (rsr & UART01x_RSR_FE)
- uap->port.icount.frame++;
+ port->icount.frame++;
if (rsr & UART01x_RSR_OE)
- uap->port.icount.overrun++;
+ port->icount.overrun++;
- rsr &= uap->port.read_status_mask;
+ rsr &= port->read_status_mask;
if (rsr & UART01x_RSR_BE)
flag = TTY_BREAK;
@@ -151,56 +151,57 @@ static void pl010_rx_chars(struct uart_amba_port *uap)
flag = TTY_FRAME;
}
- if (uart_handle_sysrq_char(&uap->port, ch))
+ if (uart_handle_sysrq_char(port, ch))
goto ignore_char;
- uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+ uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag);
ignore_char:
- status = readb(uap->port.membase + UART01x_FR);
+ status = readb(port->membase + UART01x_FR);
}
- tty_flip_buffer_push(&uap->port.state->port);
+ tty_flip_buffer_push(&port->state->port);
}
-static void pl010_tx_chars(struct uart_amba_port *uap)
+static void pl010_tx_chars(struct uart_port *port)
{
- struct circ_buf *xmit = &uap->port.state->xmit;
+ struct circ_buf *xmit = &port->state->xmit;
int count;
- if (uap->port.x_char) {
- writel(uap->port.x_char, uap->port.membase + UART01x_DR);
- uap->port.icount.tx++;
- uap->port.x_char = 0;
+ if (port->x_char) {
+ writel(port->x_char, port->membase + UART01x_DR);
+ port->icount.tx++;
+ port->x_char = 0;
return;
}
- if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
- pl010_stop_tx(&uap->port);
+ if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
+ pl010_stop_tx(port);
return;
}
- count = uap->port.fifosize >> 1;
+ count = port->fifosize >> 1;
do {
- writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
+ writel(xmit->buf[xmit->tail], port->membase + UART01x_DR);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- uap->port.icount.tx++;
+ port->icount.tx++;
if (uart_circ_empty(xmit))
break;
} while (--count > 0);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(&uap->port);
+ uart_write_wakeup(port);
if (uart_circ_empty(xmit))
- pl010_stop_tx(&uap->port);
+ pl010_stop_tx(port);
}
static void pl010_modem_status(struct uart_amba_port *uap)
{
+ struct uart_port *port = &uap->port;
unsigned int status, delta;
- writel(0, uap->port.membase + UART010_ICR);
+ writel(0, port->membase + UART010_ICR);
- status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ status = readb(port->membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
delta = status ^ uap->old_status;
uap->old_status = status;
@@ -209,65 +210,63 @@ static void pl010_modem_status(struct uart_amba_port *uap)
return;
if (delta & UART01x_FR_DCD)
- uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
+ uart_handle_dcd_change(port, status & UART01x_FR_DCD);
if (delta & UART01x_FR_DSR)
- uap->port.icount.dsr++;
+ port->icount.dsr++;
if (delta & UART01x_FR_CTS)
- uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
+ uart_handle_cts_change(port, status & UART01x_FR_CTS);
- wake_up_interruptible(&uap->port.state->port.delta_msr_wait);
+ wake_up_interruptible(&port->state->port.delta_msr_wait);
}
static irqreturn_t pl010_int(int irq, void *dev_id)
{
struct uart_amba_port *uap = dev_id;
+ struct uart_port *port = &uap->port;
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
int handled = 0;
- spin_lock(&uap->port.lock);
+ spin_lock(&port->lock);
- status = readb(uap->port.membase + UART010_IIR);
+ status = readb(port->membase + UART010_IIR);
if (status) {
do {
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
- pl010_rx_chars(uap);
+ pl010_rx_chars(port);
if (status & UART010_IIR_MIS)
pl010_modem_status(uap);
if (status & UART010_IIR_TIS)
- pl010_tx_chars(uap);
+ pl010_tx_chars(port);
if (pass_counter-- == 0)
break;
- status = readb(uap->port.membase + UART010_IIR);
+ status = readb(port->membase + UART010_IIR);
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
UART010_IIR_TIS));
handled = 1;
}
- spin_unlock(&uap->port.lock);
+ spin_unlock(&port->lock);
return IRQ_RETVAL(handled);
}
static unsigned int pl010_tx_empty(struct uart_port *port)
{
- struct uart_amba_port *uap =
- container_of(port, struct uart_amba_port, port);
- unsigned int status = readb(uap->port.membase + UART01x_FR);
+ unsigned int status = readb(port->membase + UART01x_FR);
+
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
}
static unsigned int pl010_get_mctrl(struct uart_port *port)
{
- struct uart_amba_port *uap =
- container_of(port, struct uart_amba_port, port);
unsigned int result = 0;
unsigned int status;
- status = readb(uap->port.membase + UART01x_FR);
+ status = readb(port->membase + UART01x_FR);
if (status & UART01x_FR_DCD)
result |= TIOCM_CAR;
if (status & UART01x_FR_DSR)
@@ -284,24 +283,22 @@ static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl)
container_of(port, struct uart_amba_port, port);
if (uap->data)
- uap->data->set_mctrl(uap->dev, uap->port.membase, mctrl);
+ uap->data->set_mctrl(uap->dev, port->membase, mctrl);
}
static void pl010_break_ctl(struct uart_port *port, int break_state)
{
- struct uart_amba_port *uap =
- container_of(port, struct uart_amba_port, port);
unsigned long flags;
unsigned int lcr_h;
- spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = readb(uap->port.membase + UART010_LCRH);
+ spin_lock_irqsave(&port->lock, flags);
+ lcr_h = readb(port->membase + UART010_LCRH);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
- writel(lcr_h, uap->port.membase + UART010_LCRH);
- spin_unlock_irqrestore(&uap->port.lock, flags);
+ writel(lcr_h, port->membase + UART010_LCRH);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static int pl010_startup(struct uart_port *port)
@@ -317,25 +314,25 @@ static int pl010_startup(struct uart_port *port)
if (retval)
goto out;
- uap->port.uartclk = clk_get_rate(uap->clk);
+ port->uartclk = clk_get_rate(uap->clk);
/*
* Allocate the IRQ
*/
- retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap);
+ retval = request_irq(port->irq, pl010_int, 0, "uart-pl010", uap);
if (retval)
goto clk_dis;
/*
* initialise the old status of the modem signals
*/
- uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
+ uap->old_status = readb(port->membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
/*
* Finally, enable interrupts
*/
writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
- uap->port.membase + UART010_CR);
+ port->membase + UART010_CR);
return 0;
@@ -353,17 +350,17 @@ static void pl010_shutdown(struct uart_port *port)
/*
* Free the interrupt
*/
- free_irq(uap->port.irq, uap);
+ free_irq(port->irq, uap);
/*
* disable all interrupts, disable the port
*/
- writel(0, uap->port.membase + UART010_CR);
+ writel(0, port->membase + UART010_CR);
/* disable break condition and fifos */
- writel(readb(uap->port.membase + UART010_LCRH) &
+ writel(readb(port->membase + UART010_LCRH) &
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
- uap->port.membase + UART010_LCRH);
+ port->membase + UART010_LCRH);
/*
* Shut down the clock producer
@@ -375,8 +372,6 @@ static void
pl010_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
- struct uart_amba_port *uap =
- container_of(port, struct uart_amba_port, port);
unsigned int lcr_h, old_cr;
unsigned long flags;
unsigned int baud, quot;
@@ -384,7 +379,7 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
@@ -408,63 +403,63 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
if (!(termios->c_cflag & PARODD))
lcr_h |= UART01x_LCRH_EPS;
}
- if (uap->port.fifosize > 1)
+ if (port->fifosize > 1)
lcr_h |= UART01x_LCRH_FEN;
- spin_lock_irqsave(&uap->port.lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
/*
* Update the per-port timeout.
*/
uart_update_timeout(port, termios->c_cflag, baud);
- uap->port.read_status_mask = UART01x_RSR_OE;
+ port->read_status_mask = UART01x_RSR_OE;
if (termios->c_iflag & INPCK)
- uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+ port->read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
- uap->port.read_status_mask |= UART01x_RSR_BE;
+ port->read_status_mask |= UART01x_RSR_BE;
/*
* Characters to ignore
*/
- uap->port.ignore_status_mask = 0;
+ port->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
- uap->port.ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
+ port->ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
if (termios->c_iflag & IGNBRK) {
- uap->port.ignore_status_mask |= UART01x_RSR_BE;
+ port->ignore_status_mask |= UART01x_RSR_BE;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
- uap->port.ignore_status_mask |= UART01x_RSR_OE;
+ port->ignore_status_mask |= UART01x_RSR_OE;
}
/*
* Ignore all characters if CREAD is not set.
*/
if ((termios->c_cflag & CREAD) == 0)
- uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
+ port->ignore_status_mask |= UART_DUMMY_RSR_RX;
- old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
+ old_cr = readb(port->membase + UART010_CR) & ~UART010_CR_MSIE;
if (UART_ENABLE_MS(port, termios->c_cflag))
old_cr |= UART010_CR_MSIE;
/* Set baud rate */
quot -= 1;
- writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
- writel(quot & 0xff, uap->port.membase + UART010_LCRL);
+ writel((quot & 0xf00) >> 8, port->membase + UART010_LCRM);
+ writel(quot & 0xff, port->membase + UART010_LCRL);
/*
* ----------v----------v----------v----------v-----
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
* ----------^----------^----------^----------^-----
*/
- writel(lcr_h, uap->port.membase + UART010_LCRH);
- writel(old_cr, uap->port.membase + UART010_CR);
+ writel(lcr_h, port->membase + UART010_LCRH);
+ writel(old_cr, port->membase + UART010_CR);
- spin_unlock_irqrestore(&uap->port.lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static void pl010_set_ldisc(struct uart_port *port, struct ktermios *termios)
@@ -558,21 +553,20 @@ static struct uart_amba_port *amba_ports[UART_NR];
static void pl010_console_putchar(struct uart_port *port, unsigned char ch)
{
- struct uart_amba_port *uap =
- container_of(port, struct uart_amba_port, port);
unsigned int status;
do {
- status = readb(uap->port.membase + UART01x_FR);
+ status = readb(port->membase + UART01x_FR);
barrier();
} while (!UART_TX_READY(status));
- writel(ch, uap->port.membase + UART01x_DR);
+ writel(ch, port->membase + UART01x_DR);
}
static void
pl010_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_amba_port *uap = amba_ports[co->index];
+ struct uart_port *port = &uap->port;
unsigned int status, old_cr;
clk_enable(uap->clk);
@@ -580,20 +574,20 @@ pl010_console_write(struct console *co, const char *s, unsigned int count)
/*
* First save the CR then disable the interrupts
*/
- old_cr = readb(uap->port.membase + UART010_CR);
- writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
+ old_cr = readb(port->membase + UART010_CR);
+ writel(UART01x_CR_UARTEN, port->membase + UART010_CR);
- uart_console_write(&uap->port, s, count, pl010_console_putchar);
+ uart_console_write(port, s, count, pl010_console_putchar);
/*
* Finally, wait for transmitter to become empty
* and restore the TCR
*/
do {
- status = readb(uap->port.membase + UART01x_FR);
+ status = readb(port->membase + UART01x_FR);
barrier();
} while (status & UART01x_FR_BUSY);
- writel(old_cr, uap->port.membase + UART010_CR);
+ writel(old_cr, port->membase + UART010_CR);
clk_disable(uap->clk);
}
--
2.35.1
Powered by blists - more mailing lists