linux-kernel - Re: [PATCH 2/2] dt-bindings: phy: qcom,qmp: Describe 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1645711159.080022.2923124.nullmailer@robh.at.kernel.org>
Date:   Thu, 24 Feb 2022 07:59:19 -0600
From:   Rob Herring <robh@...nel.org>
To:     Bhupesh Sharma <bhupesh.sharma@...aro.org>
Cc:     agross@...nel.org, bhupesh.linux@...il.com,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        robh+dt@...nel.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, Vinod Koul <vkoul@...nel.org>,
        devicetree@...r.kernel.org, linux-phy@...ts.infradead.org
Subject: Re: [PATCH 2/2] dt-bindings: phy: qcom,qmp: Describe 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties

On Thu, 24 Feb 2022 18:02:48 +0530, Bhupesh Sharma wrote:
> Since a few boards based on QCoM qmp phy use the
> 'vdda-max-microamp' & 'vdda-pll-max-microamp' properties to
> describe the ufs phy nodes, add them to the dt-bindings doc as well.
> 
> This fixes the following '$ make dtbs_check' warning(s):
> 
> sm8350-microsoft-surface-duo2.dt.yaml: phy@...7000:
>   'vdda-max-microamp', 'vdda-pll-max-microamp' do not match any of
>    the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
> 
> Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
> Cc: Vinod Koul <vkoul@...nel.org>
> Cc: Rob Herring <robh+dt@...nel.org>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
> ---
>  Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/1597137


phy@...7000: 'lanes@...6000' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm/boot/dts/qcom-sdx55-mtp.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-t55.dt.yaml
	arch/arm/boot/dts/qcom-sdx55-telit-fn980-tlb.dt.yaml

phy@...e000: 'lanes@...e200' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sc7280-crd.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-herobrine.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp2.dt.yaml
	arch/arm64/boot/dts/qcom/sc7280-idp.dt.yaml

phy@...7000: 'lanes@...7400' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/sm8450-qrd.dt.yaml

phy@...000: 'vdda-phy-max-microamp', 'vddp-ref-clk-always-on', 'vddp-ref-clk-max-microamp' do not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dt.yaml
	arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dt.yaml

phy-wrapper@...9000: 'vdda-phy-supply' is a required property
	arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dt.yaml
	arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dt.yaml

phy-wrapper@...9000: 'vdda-pll-supply' is a required property
	arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx214.dt.yaml
	arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dt.yaml

ssphy@...00: 'lane@...00' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml