[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YhktWpoJekR2Lj0D@robh.at.kernel.org>
Date: Fri, 25 Feb 2022 13:26:18 -0600
From: Rob Herring <robh@...nel.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
Cc: Alim Akhtar <alim.akhtar@...sung.com>,
Avri Altman <avri.altman@....com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Wei Xu <xuwei5@...ilicon.com>, Nishanth Menon <nm@...com>,
Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>,
"James E.J. Bottomley" <jejb@...ux.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>,
Jan Kotas <jank@...ence.com>, Li Wei <liwei213@...wei.com>,
Stanley Chu <stanley.chu@...iatek.com>,
Yaniv Gardi <ygardi@...eaurora.org>,
linux-scsi@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org,
linux-mediatek@...ts.infradead.org
Subject: Re: [PATCH v2 01/15] dt-bindings: ufs: add common platform bindings
On Tue, Feb 22, 2022 at 03:58:40PM +0100, Krzysztof Kozlowski wrote:
> Add bindings for common parts (platform) of Universal Flash Storage
> (UFS) Host Controllers in dtschema format.
>
> The 'freq-table-hz' is not correct in dtschema, because '-hz' suffix
> defines uint32 type, not an array. Therefore deprecate 'freq-table-hz'
> and use 'freq-table' instead.
-hz is an array type. We can extend it to matrix if needed.
I do think this property is a bit questionable. Do we really need a
minimum in DT and if not, wouldn't assigned-clocks-rate work? Or an OPP
table.
> Include also the bindings directory in UFS maintainers entry.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
> ---
> .../devicetree/bindings/ufs/ti,j721e-ufs.yaml | 2 +-
> .../devicetree/bindings/ufs/ufs-common.yaml | 88 +++++++++++++++++++
> MAINTAINERS | 1 +
> 3 files changed, 90 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/ufs/ufs-common.yaml
>
> diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
> index 4d13e6bc1c50..dc93fe2d3458 100644
> --- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
> +++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
> @@ -80,7 +80,7 @@ examples:
> compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
> reg = <0x0 0x4000 0x0 0x10000>;
> interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> - freq-table-hz = <19200000 19200000>;
> + freq-table = <19200000 19200000>;
> power-domains = <&k3_pds 277>;
> clocks = <&k3_clks 277 1>;
> assigned-clocks = <&k3_clks 277 1>;
> diff --git a/Documentation/devicetree/bindings/ufs/ufs-common.yaml b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
> new file mode 100644
> index 000000000000..85c73d2853e9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ufs/ufs-common.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ufs/ufs-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common properties for Universal Flash Storage (UFS) Host Controllers
> +
> +maintainers:
> + - Alim Akhtar <alim.akhtar@...sung.com>
> + - Avri Altman <avri.altman@....com>
> +
> +properties:
> + clocks: true
> +
> + clock-names: true
> +
> + freq-table-hz:
> + deprecated: true
> + description:
> + Use freq-table.
> +
> + freq-table:
> + $ref: /schemas/types.yaml#/definitions/uint32-matrix
> + items:
> + items:
> + - description: Minimum frequency for given clock
> + - description: Maximum frequency for given clock
> + description: |
> + Array of <min max> operating frequencies in Hz stored in the same order
> + as the clocks property. If this property is not defined or a value in the
> + array is "0" then it is assumed that the frequency is set by the parent
> + clock or a fixed rate clock source.
> +
> + interrupts:
> + maxItems: 1
> +
> + lanes-per-direction:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + enum: [1, 2]
> + default: 2
> + description:
> + Number of lanes available per direction. Note that it is assume same
> + number of lanes is used both directions at once.
> +
> + vdd-hba-supply:
> + description:
> + Phandle to UFS host controller supply regulator node.
> +
> + vcc-supply:
> + description:
> + Phandle to VCC supply regulator node.
> +
> + vccq-supply:
> + description:
> + Phandle to VCCQ supply regulator node.
> +
> + vccq2-supply:
> + description:
> + Phandle to VCCQ2 supply regulator node.
> +
> + vcc-supply-1p8:
> + type: boolean
> + description:
> + For embedded UFS devices, valid VCC range is 1.7-1.95V or 2.7-3.6V. This
> + boolean property when set, specifies to use low voltage range of
> + 1.7-1.95V. Note for external UFS cards this property is invalid and valid
> + VCC range is always 2.7-3.6V.
> +
> + vcc-max-microamp:
> + description:
> + Specifies max. load that can be drawn from VCC supply.
> +
> + vccq-max-microamp:
> + description:
> + Specifies max. load that can be drawn from VCCQ supply.
> +
> + vccq2-max-microamp:
> + description:
> + Specifies max. load that can be drawn from VCCQ2 supply.
> +
> +dependencies:
> + freq-table: [ 'clocks' ]
> +
> +required:
> + - interrupts
> +
> +additionalProperties: true
> diff --git a/MAINTAINERS b/MAINTAINERS
> index aa0f6cbb634e..c2cff57d32f8 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -20015,6 +20015,7 @@ R: Alim Akhtar <alim.akhtar@...sung.com>
> R: Avri Altman <avri.altman@....com>
> L: linux-scsi@...r.kernel.org
> S: Supported
> +F: Documentation/devicetree/bindings/ufs/
> F: Documentation/scsi/ufs.rst
> F: drivers/scsi/ufs/
>
> --
> 2.32.0
>
>
Powered by blists - more mailing lists