[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAH=2NtxQBS=c0W0cpX5EdNi12PrqiKEuzyvEtF8WrVE6nsU_rg@mail.gmail.com>
Date: Fri, 25 Feb 2022 14:46:55 +0530
From: Bhupesh Sharma <bhupesh.sharma@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, bhupesh.linux@...il.com,
agross@...nel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-phy@...ts.infradead.org,
robh+dt@...nel.org, Bjorn Andersson <bjorn.andersson@...aro.org>,
Vinod Koul <vkoul@...nel.org>
Subject: Re: [PATCH 1/2] dt-bindings: phy: qcom,qmp: Mark '#clock-cells' as a
'optional' property
Hi Dmitry,
Thanks for your review comments.
On Thu, 24 Feb 2022 at 20:22, Dmitry Baryshkov
<dmitry.baryshkov@...aro.org> wrote:
>
> On Thu, 24 Feb 2022 at 15:33, Bhupesh Sharma <bhupesh.sharma@...aro.org> wrote:
> >
> > Since '#clock-cells' is not a required property for several
> > QCoM boards supporting qmp-phy(s) (for e.g. sm8150, sm8250 or sm8350 SoC
> > based boards), mark it as an optional property instead.
>
> I believe the description is not correct. the clock-cells should not
> be used at all, so it should be removed from the root node.
Hmm.. 'clock-cells' is still used for describing qmp phy pcie nodes for certain
devices like 'msm8996.dtsi'. I am not sure if removing it would impact existing
dts files. But let me try cleaning them up in v2.
> Also we should describe phy@ properties.
Sure, I will add them in v2.
Regards,
Bhupesh
> >
> > This fixes the following '$ make dtbs_check' warning(s):
> >
> > sm8350-microsoft-surface-duo2.dt.yaml: phy@...7000:
> > '#clock-cells' is a required property
> >
> > Cc: Bjorn Andersson <bjorn.andersson@...aro.org>
> > Cc: Vinod Koul <vkoul@...nel.org>
> > Cc: Rob Herring <robh+dt@...nel.org>
> > Signed-off-by: Bhupesh Sharma <bhupesh.sharma@...aro.org>
> > ---
> > Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> > index 9e0f60e682c4..746a929c63bb 100644
> > --- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> > +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> > @@ -115,7 +115,6 @@ patternProperties:
> > required:
> > - compatible
> > - reg
> > - - "#clock-cells"
> > - "#address-cells"
> > - "#size-cells"
> > - ranges
> > --
> > 2.35.1
> >
>
>
> --
> With best wishes
> Dmitry
Powered by blists - more mailing lists