[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220226204507.2511633-3-michael@walle.cc>
Date: Sat, 26 Feb 2022 21:45:04 +0100
From: Michael Walle <michael@...le.cc>
To: Lars Povlsen <lars.povlsen@...rochip.com>,
Steen Hegelund <Steen.Hegelund@...rochip.com>,
Linus Walleij <linus.walleij@...aro.org>
Cc: UNGLinuxDriver@...rochip.com, linux-arm-kernel@...ts.infradead.org,
linux-gpio@...r.kernel.org, linux-kernel@...r.kernel.org,
Colin Foster <colin.foster@...advantage.com>,
Michael Walle <michael@...le.cc>
Subject: [PATCH v2 2/5] pinctrl: microchip-sgpio: don't do RMW for interrupt ack register
The interrupt ack register has the usual "write one to clear" semantics.
No read-modify-write is required here.
This is also a preparation patch to change the sgpio_clrsetbits() to use
regmap_update_bits() which don't write the value if it is not changed.
Signed-off-by: Michael Walle <michael@...le.cc>
---
drivers/pinctrl/pinctrl-microchip-sgpio.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/pinctrl/pinctrl-microchip-sgpio.c b/drivers/pinctrl/pinctrl-microchip-sgpio.c
index 666f1e3889e0..29cce0609fd9 100644
--- a/drivers/pinctrl/pinctrl-microchip-sgpio.c
+++ b/drivers/pinctrl/pinctrl-microchip-sgpio.c
@@ -640,7 +640,14 @@ static void microchip_sgpio_irq_unmask(struct irq_data *data)
static void microchip_sgpio_irq_ack(struct irq_data *data)
{
- microchip_sgpio_irq_setreg(data, REG_INT_ACK, false);
+ struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
+ struct sgpio_bank *bank = gpiochip_get_data(chip);
+ unsigned int gpio = irqd_to_hwirq(data);
+ struct sgpio_port_addr addr;
+
+ sgpio_pin_to_addr(bank->priv, gpio, &addr);
+
+ sgpio_writel(bank->priv, BIT(addr.port), REG_INT_ACK, addr.bit);
}
static int microchip_sgpio_irq_set_type(struct irq_data *data, unsigned int type)
--
2.30.2
Powered by blists - more mailing lists