lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220228172357.182578542@linuxfoundation.org>
Date:   Mon, 28 Feb 2022 18:24:25 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Vladimir Olovyannikov <vladimir.olovyannikov@...adcom.com>,
        Michael Chan <michael.chan@...adcom.com>,
        "David S. Miller" <davem@...emloft.net>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.15 091/139] bnxt_en: Increase firmware message response DMA wait time

From: Michael Chan <michael.chan@...adcom.com>

[ Upstream commit b891106da52b2c12dbaf73400f6d225b06a38d80 ]

When polling for the firmware message response, we first poll for the
response message header.  Once the valid length is detected in the
header, we poll for the valid bit at the end of the message which
signals DMA completion.  Normally, this poll time for DMA completion
is extremely short (0 to a few usec).  But on some devices under some
rare conditions, it can be up to about 20 msec.

Increase this delay to 50 msec and use udelay() for the first 10 usec
for the common case, and usleep_range() beyond that.

Also, change the error message to include the above delay time when
printing the timeout value.

Fixes: 3c8c20db769c ("bnxt_en: move HWRM API implementation into separate file")
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@...adcom.com>
Signed-off-by: Michael Chan <michael.chan@...adcom.com>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c | 12 +++++++++---
 drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h |  2 +-
 2 files changed, 10 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
index 8171f4912fa01..3a0eeb3737767 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
@@ -595,18 +595,24 @@ static int __hwrm_send(struct bnxt *bp, struct bnxt_hwrm_ctx *ctx)
 
 		/* Last byte of resp contains valid bit */
 		valid = ((u8 *)ctx->resp) + len - 1;
-		for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; j++) {
+		for (j = 0; j < HWRM_VALID_BIT_DELAY_USEC; ) {
 			/* make sure we read from updated DMA memory */
 			dma_rmb();
 			if (*valid)
 				break;
-			usleep_range(1, 5);
+			if (j < 10) {
+				udelay(1);
+				j++;
+			} else {
+				usleep_range(20, 30);
+				j += 20;
+			}
 		}
 
 		if (j >= HWRM_VALID_BIT_DELAY_USEC) {
 			if (!(ctx->flags & BNXT_HWRM_CTX_SILENT))
 				netdev_err(bp->dev, "Error (timeout: %u) msg {0x%x 0x%x} len:%d v:%d\n",
-					   hwrm_total_timeout(i),
+					   hwrm_total_timeout(i) + j,
 					   le16_to_cpu(ctx->req->req_type),
 					   le16_to_cpu(ctx->req->seq_id), len,
 					   *valid);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
index 9a9fc4e8041b6..380ef69afb51b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.h
@@ -94,7 +94,7 @@ static inline unsigned int hwrm_total_timeout(unsigned int n)
 }
 
 
-#define HWRM_VALID_BIT_DELAY_USEC	150
+#define HWRM_VALID_BIT_DELAY_USEC	50000
 
 static inline bool bnxt_cfa_hwrm_message(u16 req_type)
 {
-- 
2.34.1



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ