lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Mon, 28 Feb 2022 18:23:06 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        José Roberto de Souza <jose.souza@...el.com>,
        Imre Deak <imre.deak@...el.com>,
        Tvrtko Ursulin <tvrtko.ursulin@...el.com>
Subject: [PATCH 5.16 024/164] drm/i915: Disconnect PHYs left connected by BIOS on disabled ports

From: Imre Deak <imre.deak@...el.com>

commit a40ee54e9a0958406469d46def03eec62aea0b69 upstream.

BIOS may leave a TypeC PHY in a connected state even though the
corresponding port is disabled. This will prevent any hotplug events
from being signalled (after the monitor deasserts and then reasserts its
HPD) until the PHY is disconnected and so the driver will not detect a
connected sink. Rebooting with the PHY in the connected state also
results in a system hang.

Fix the above by disconnecting TypeC PHYs on disabled ports.

Before commit 64851a32c463e5 the PHY connected state was read out even
for disabled ports and later the PHY got disconnected as a side effect
of a tc_port_lock/unlock() sequence (during connector probing), hence
recovering the port's hotplug functionality.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5014
Fixes: 64851a32c463 ("drm/i915/tc: Add a mode for the TypeC PHY's disconnected state")
Cc: <stable@...r.kernel.org> # v5.16+
Cc: José Roberto de Souza <jose.souza@...el.com>
Signed-off-by: Imre Deak <imre.deak@...el.com>
Reviewed-by: José Roberto de Souza <jose.souza@...el.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217152237.670220-1-imre.deak@intel.com
(cherry picked from commit ed0ccf349ffd9c80e7376d4d8c608643de990e86)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@...el.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/gpu/drm/i915/display/intel_tc.c |   26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

--- a/drivers/gpu/drm/i915/display/intel_tc.c
+++ b/drivers/gpu/drm/i915/display/intel_tc.c
@@ -691,6 +691,8 @@ void intel_tc_port_sanitize(struct intel
 {
 	struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
 	struct intel_encoder *encoder = &dig_port->base;
+	intel_wakeref_t tc_cold_wref;
+	enum intel_display_power_domain domain;
 	int active_links = 0;
 
 	mutex_lock(&dig_port->tc_lock);
@@ -702,12 +704,11 @@ void intel_tc_port_sanitize(struct intel
 
 	drm_WARN_ON(&i915->drm, dig_port->tc_mode != TC_PORT_DISCONNECTED);
 	drm_WARN_ON(&i915->drm, dig_port->tc_lock_wakeref);
-	if (active_links) {
-		enum intel_display_power_domain domain;
-		intel_wakeref_t tc_cold_wref = tc_cold_block(dig_port, &domain);
 
-		dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port);
+	tc_cold_wref = tc_cold_block(dig_port, &domain);
 
+	dig_port->tc_mode = intel_tc_port_get_current_mode(dig_port);
+	if (active_links) {
 		if (!icl_tc_phy_is_connected(dig_port))
 			drm_dbg_kms(&i915->drm,
 				    "Port %s: PHY disconnected with %d active link(s)\n",
@@ -716,10 +717,23 @@ void intel_tc_port_sanitize(struct intel
 
 		dig_port->tc_lock_wakeref = tc_cold_block(dig_port,
 							  &dig_port->tc_lock_power_domain);
-
-		tc_cold_unblock(dig_port, domain, tc_cold_wref);
+	} else {
+		/*
+		 * TBT-alt is the default mode in any case the PHY ownership is not
+		 * held (regardless of the sink's connected live state), so
+		 * we'll just switch to disconnected mode from it here without
+		 * a note.
+		 */
+		if (dig_port->tc_mode != TC_PORT_TBT_ALT)
+			drm_dbg_kms(&i915->drm,
+				    "Port %s: PHY left in %s mode on disabled port, disconnecting it\n",
+				    dig_port->tc_port_name,
+				    tc_port_mode_name(dig_port->tc_mode));
+		icl_tc_phy_disconnect(dig_port);
 	}
 
+	tc_cold_unblock(dig_port, domain, tc_cold_wref);
+
 	drm_dbg_kms(&i915->drm, "Port %s: sanitize mode (%s)\n",
 		    dig_port->tc_port_name,
 		    tc_port_mode_name(dig_port->tc_mode));


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ