linux-kernel - Re: [PATCH v3 2/3] arm64: dts: qcom: sc7280: Add lpass cpu node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAE-0n53X-+gaspxgdVtnr8FW6S5VhXPJaAxLd+vikCnYf9aF6w@mail.gmail.com>
Date:   Mon, 28 Feb 2022 13:31:03 -0800
From:   Stephen Boyd <swboyd@...omium.org>
To:     Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>,
        agross@...nel.org, bjorn.andersson@...aro.org,
        devicetree@...r.kernel.org, dianders@...omium.org,
        judyhsiao@...omium.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, robh+dt@...nel.org,
        rohitkr@...eaurora.org, srinivas.kandagatla@...aro.org
Cc:     Venkata Prasad Potturu <quic_potturu@...cinc.com>
Subject: Re: [PATCH v3 2/3] arm64: dts: qcom: sc7280: Add lpass cpu node

Quoting Srinivasa Rao Mandadapu (2022-02-03 03:33:00)
> Add lpass cpu node for audio on sc7280 based platforms.
>
> Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@...cinc.com>
> Co-developed-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
> Signed-off-by: Venkata Prasad Potturu <quic_potturu@...cinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 28 +++++++++++++++
>  arch/arm64/boot/dts/qcom/sc7280.dtsi     | 59 ++++++++++++++++++++++++++++++++
>  2 files changed, 87 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 2806888..a76b2d1 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -691,3 +691,31 @@
>  &vamacro {
>         vdd-micb-supply = <&vreg_bob>;
>  };
> +
> +&lpass_cpu {
> +       status = "okay";
> +
> +       pinctrl-names = "default";
> +       pinctrl-0 = <&sec_mi2s_active>;

Is it a reset gpio? If so, make it a reset-gpios property. I couldn't
find the definition.

> +
> +       mi2s-secondary@1 {
> +               reg = <MI2S_SECONDARY>;
> +               qcom,playback-sd-lines = <0>;
> +       };
> +
> +       hdmi-primary@5 {
> +               reg = <LPASS_DP_RX>;
> +       };
> +
> +       wcd-rx@6 {
> +               reg = <LPASS_CDC_DMA_RX0>;
> +       };
> +
> +       wcd-tx@19 {
> +               reg = <LPASS_CDC_DMA_TX3>;
> +       };
> +
> +       va-tx@25 {
> +               reg = <LPASS_CDC_DMA_VA_TX0>;
> +       };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 946eb01..c2da5ce 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -17,6 +17,7 @@
>  #include <dt-bindings/reset/qcom,sdm845-aoss.h>
>  #include <dt-bindings/reset/qcom,sdm845-pdc.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +#include <dt-bindings/sound/qcom,lpass.h>
>  #include <dt-bindings/thermal/thermal.h>
>
>  / {
> @@ -1847,6 +1848,64 @@
>                         #size-cells = <0>;
>                 };
>
> +               lpass_cpu: audio-subsystem@...0000 {
> +                       compatible = "qcom,sc7280-lpass-cpu";
> +                       reg = <0 0x3260000 0 0xC000>,
> +                             <0 0x3280000 0 0x29000>,
> +                             <0 0x3340000 0 0x29000>,
> +                             <0 0x336C000 0 0x3000>,
> +                             <0 0x3987000 0 0x68000>,
> +                             <0 0x3B00000 0 0x29000>;

Lowercase hex. Pad out reg to 8 digits.

> +                       reg-names = "lpass-rxtx-cdc-dma-lpm",
> +                                   "lpass-rxtx-lpaif",
> +                                   "lpass-va-lpaif",
> +                                   "lpass-va-cdc-dma-lpm",
> +                                   "lpass-hdmiif",
> +                                   "lpass-lpaif";

That 'lpass' prefix looks very redundant.

> +
> +                       iommus = <&apps_smmu 0x1820 0>,
> +                                <&apps_smmu 0x1821 0>,
> +                                <&apps_smmu 0x1832 0>;