| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220228135408.1452882-1-sumit.garg@linaro.org>
Date: Mon, 28 Feb 2022 19:24:08 +0530
From: Sumit Garg <sumit.garg@...aro.org>
To: linux-serial@...r.kernel.org, hasegawa-hitomi@...itsu.com
Cc: gregkh@...uxfoundation.org, jirislaby@...nel.org,
jason.wessel@...driver.com, daniel.thompson@...aro.org,
dianders@...omium.org, linux-kernel@...r.kernel.org,
kgdb-bugreport@...ts.sourceforge.net, arnd@...db.de,
peterz@...radead.org, Sumit Garg <sumit.garg@...aro.org>
Subject: [RFT v3] tty/sysrq: Make sysrq handler NMI aware
Allow a magic sysrq to be triggered from an NMI context. This is done
via marking some sysrq actions as NMI safe. Safe actions will be allowed
to run from NMI context whilst that cannot run from an NMI will be queued
as irq_work for later processing.
The major use-case is to add NMI debugging capabilities to the kernel
in order to debug scenarios such as:
- Primary CPU is stuck in deadlock with interrupts disabled and hence
doesn't honor serial device interrupt. So having magic sysrq triggered
as an NMI is helpful for debugging.
- Always enabled NMI based magic sysrq irrespective of whether the serial
TTY port is active or not.
- Apart from UART interrupts, it allows magic sysrq to be triggered from
a diagnostic NMI interrupt on systems such as A64FX.
A particular sysrq handler is only marked as NMI safe in case the handler
isn't contending for any synchronization primitives as in NMI context
they are expected to cause deadlocks. Note that the debug sysrq do not
contend for any synchronization primitives. It does call kgdb_breakpoint()
to provoke a trap but that trap handler should be NMI safe on
architectures that implement an NMI.
Signed-off-by: Sumit Garg <sumit.garg@...aro.org>
---
Hi Hitomi Hasegawa,
Give this patch a try with diagnostic pseudo NMI interrupt on A64FX and
let me know if it works for you. Also, feel free to include this patch
along with your driver patch.
-Sumit
Changes in v3:
- Extend commit message to include use-cases.
- Get rid of redundant kfifo stuff.
- Incorporate other misc. feedback from Peter Z.
Changes in v2:
- Rebased to 5.17-rc5.
- Separate this patch from complete patch-set [1] as its relevant for
other diagnostic NMI interrupts [2] as well apart from uart NMI
interrupts.
- Incorporated suggestions from Doug.
[1] https://lore.kernel.org/linux-arm-kernel/CAFA6WYOWHgmYYt=KGXDh2hKiuy_rQbJfi279ev0+s-Qh7L21kA@mail.gmail.com/t/#m2b5006f08581448020eb24566927a104d0b95c44
[2] https://lore.kernel.org/all/Yhi0rrkSR63ZhjX1@kroah.com/T/
drivers/tty/sysrq.c | 45 ++++++++++++++++++++++++++++++++++++++-
include/linux/sysrq.h | 1 +
kernel/debug/debug_core.c | 1 +
3 files changed, 46 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index bbfd004449b5..40cd492fe6ec 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -51,6 +51,7 @@
#include <linux/syscalls.h>
#include <linux/of.h>
#include <linux/rcupdate.h>
+#include <linux/irq_work.h>
#include <asm/ptrace.h>
#include <asm/irq_regs.h>
@@ -112,6 +113,7 @@ static const struct sysrq_key_op sysrq_loglevel_op = {
.help_msg = "loglevel(0-9)",
.action_msg = "Changing Loglevel",
.enable_mask = SYSRQ_ENABLE_LOG,
+ .nmi_safe = true,
};
#ifdef CONFIG_VT
@@ -159,6 +161,7 @@ static const struct sysrq_key_op sysrq_crash_op = {
.help_msg = "crash(c)",
.action_msg = "Trigger a crash",
.enable_mask = SYSRQ_ENABLE_DUMP,
+ .nmi_safe = true,
};
static void sysrq_handle_reboot(int key)
@@ -172,6 +175,7 @@ static const struct sysrq_key_op sysrq_reboot_op = {
.help_msg = "reboot(b)",
.action_msg = "Resetting",
.enable_mask = SYSRQ_ENABLE_BOOT,
+ .nmi_safe = true,
};
const struct sysrq_key_op *__sysrq_reboot_op = &sysrq_reboot_op;
@@ -219,6 +223,7 @@ static const struct sysrq_key_op sysrq_showlocks_op = {
.handler = sysrq_handle_showlocks,
.help_msg = "show-all-locks(d)",
.action_msg = "Show Locks Held",
+ .nmi_safe = true,
};
#else
#define sysrq_showlocks_op (*(const struct sysrq_key_op *)NULL)
@@ -291,6 +296,7 @@ static const struct sysrq_key_op sysrq_showregs_op = {
.help_msg = "show-registers(p)",
.action_msg = "Show Regs",
.enable_mask = SYSRQ_ENABLE_DUMP,
+ .nmi_safe = true,
};
static void sysrq_handle_showstate(int key)
@@ -328,6 +334,7 @@ static const struct sysrq_key_op sysrq_ftrace_dump_op = {
.help_msg = "dump-ftrace-buffer(z)",
.action_msg = "Dump ftrace buffer",
.enable_mask = SYSRQ_ENABLE_DUMP,
+ .nmi_safe = true,
};
#else
#define sysrq_ftrace_dump_op (*(const struct sysrq_key_op *)NULL)
@@ -566,6 +573,32 @@ static void __sysrq_put_key_op(int key, const struct sysrq_key_op *op_p)
sysrq_key_table[i] = op_p;
}
+static int sysrq_nmi_key = -1;
+
+static void sysrq_do_irq_work(struct irq_work *work)
+{
+ const struct sysrq_key_op *op_p;
+ int orig_suppress_printk;
+
+ orig_suppress_printk = suppress_printk;
+ suppress_printk = 0;
+
+ rcu_sysrq_start();
+ rcu_read_lock();
+
+ op_p = __sysrq_get_key_op(sysrq_nmi_key);
+ if (op_p)
+ op_p->handler(sysrq_nmi_key);
+
+ rcu_read_unlock();
+ rcu_sysrq_end();
+
+ suppress_printk = orig_suppress_printk;
+ sysrq_nmi_key = -1;
+}
+
+static DEFINE_IRQ_WORK(sysrq_irq_work, sysrq_do_irq_work);
+
void __handle_sysrq(int key, bool check_mask)
{
const struct sysrq_key_op *op_p;
@@ -573,6 +606,10 @@ void __handle_sysrq(int key, bool check_mask)
int orig_suppress_printk;
int i;
+ /* Skip sysrq handling if one already in progress */
+ if (sysrq_nmi_key != -1)
+ return;
+
orig_suppress_printk = suppress_printk;
suppress_printk = 0;
@@ -596,7 +633,13 @@ void __handle_sysrq(int key, bool check_mask)
if (!check_mask || sysrq_on_mask(op_p->enable_mask)) {
pr_info("%s\n", op_p->action_msg);
console_loglevel = orig_log_level;
- op_p->handler(key);
+
+ if (in_nmi() && !op_p->nmi_safe) {
+ sysrq_nmi_key = key;
+ irq_work_queue(&sysrq_irq_work);
+ } else {
+ op_p->handler(key);
+ }
} else {
pr_info("This sysrq operation is disabled.\n");
console_loglevel = orig_log_level;
diff --git a/include/linux/sysrq.h b/include/linux/sysrq.h
index 3a582ec7a2f1..630b5b9dc225 100644
--- a/include/linux/sysrq.h
+++ b/include/linux/sysrq.h
@@ -34,6 +34,7 @@ struct sysrq_key_op {
const char * const help_msg;
const char * const action_msg;
const int enable_mask;
+ const bool nmi_safe;
};
#ifdef CONFIG_MAGIC_SYSRQ
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index da06a5553835..53b56114f59b 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -978,6 +978,7 @@ static const struct sysrq_key_op sysrq_dbg_op = {
.handler = sysrq_handle_dbg,
.help_msg = "debug(g)",
.action_msg = "DEBUG",
+ .nmi_safe = true,
};
#endif
--
2.25.1
Powered by blists - more mailing lists