| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1646130507-26796-2-git-send-email-quic_c_sanm@quicinc.com>
Date: Tue, 1 Mar 2022 15:58:25 +0530
From: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Felipe Balbi <balbi@...nel.org>,
Stephen Boyd <swboyd@...omium.org>,
Doug Anderson <dianders@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
Mathias Nyman <mathias.nyman@...el.com>,
Pawel Laszczak <pawell@...ence.com>,
Peter Chen <peter.chen@...nel.org>,
Roger Quadros <rogerq@...nel.org>,
Aswath Govindraju <a-govindraju@...com>
CC: <linux-arm-msm@...r.kernel.org>, <linux-usb@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <quic_pkondeti@...cinc.com>,
<quic_ppratap@...cinc.com>,
Sandeep Maheswaram <quic_c_sanm@...cinc.com>
Subject: [PATCH v2 1/3] usb: xhci: refactor quirks and plat private data
From: Pavankumar Kondeti <quic_pkondeti@...cinc.com>
This refactoring allows drivers like dwc3 host glue driver to
specify their xhci quirks.
Signed-off-by: Pavankumar Kondeti <quic_pkondeti@...cinc.com>
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@...cinc.com>
---
drivers/usb/cdns3/host.c | 2 +-
drivers/usb/host/xhci-plat.c | 3 +-
drivers/usb/host/xhci-plat.h | 24 ---------------
drivers/usb/host/xhci-rcar.c | 3 +-
drivers/usb/host/xhci.h | 60 ++++--------------------------------
include/linux/usb/xhci-plat.h | 23 ++++++++++++++
include/linux/usb/xhci-quirks.h | 67 +++++++++++++++++++++++++++++++++++++++++
7 files changed, 101 insertions(+), 81 deletions(-)
delete mode 100644 drivers/usb/host/xhci-plat.h
create mode 100644 include/linux/usb/xhci-plat.h
create mode 100644 include/linux/usb/xhci-quirks.h
diff --git a/drivers/usb/cdns3/host.c b/drivers/usb/cdns3/host.c
index 9643b90..7fb8049 100644
--- a/drivers/usb/cdns3/host.c
+++ b/drivers/usb/cdns3/host.c
@@ -15,8 +15,8 @@
#include "drd.h"
#include "host-export.h"
#include <linux/usb/hcd.h>
+#include <linux/usb/xhci-plat.h>
#include "../host/xhci.h"
-#include "../host/xhci-plat.h"
#define XECP_PORT_CAP_REG 0x8000
#define XECP_AUX_CTRL_REG1 0x8120
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 649ffd8..601e656 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -19,9 +19,10 @@
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/usb/of.h>
+#include <linux/usb/xhci-quirks.h>
+#include <linux/usb/xhci-plat.h>
#include "xhci.h"
-#include "xhci-plat.h"
#include "xhci-mvebu.h"
#include "xhci-rcar.h"
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
deleted file mode 100644
index 1fb149d..0000000
--- a/drivers/usb/host/xhci-plat.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * xhci-plat.h - xHCI host controller driver platform Bus Glue.
- *
- * Copyright (C) 2015 Renesas Electronics Corporation
- */
-
-#ifndef _XHCI_PLAT_H
-#define _XHCI_PLAT_H
-
-#include "xhci.h" /* for hcd_to_xhci() */
-
-struct xhci_plat_priv {
- const char *firmware_name;
- unsigned long long quirks;
- void (*plat_start)(struct usb_hcd *);
- int (*init_quirk)(struct usb_hcd *);
- int (*suspend_quirk)(struct usb_hcd *);
- int (*resume_quirk)(struct usb_hcd *);
-};
-
-#define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv)
-#define xhci_to_priv(x) ((struct xhci_plat_priv *)(x)->priv)
-#endif /* _XHCI_PLAT_H */
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index 9888ba7..cbcb6ba 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -12,9 +12,10 @@
#include <linux/of.h>
#include <linux/usb/phy.h>
#include <linux/sys_soc.h>
+#include <linux/usb/xhci-quirks.h>
+#include <linux/usb/xhci-plat.h>
#include "xhci.h"
-#include "xhci-plat.h"
#include "xhci-rcar.h"
/*
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8a0026e..cbd7d00 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -17,6 +17,8 @@
#include <linux/kernel.h>
#include <linux/usb/hcd.h>
#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/usb/xhci-quirks.h>
+#include <linux/usb/xhci-plat.h>
/* Code sharing between pci-quirks and xhci hcd */
#include "xhci-ext-caps.h"
@@ -1844,60 +1846,6 @@ struct xhci_hcd {
#define XHCI_STATE_HALTED (1 << 1)
#define XHCI_STATE_REMOVING (1 << 2)
unsigned long long quirks;
-#define XHCI_LINK_TRB_QUIRK BIT_ULL(0)
-#define XHCI_RESET_EP_QUIRK BIT_ULL(1)
-#define XHCI_NEC_HOST BIT_ULL(2)
-#define XHCI_AMD_PLL_FIX BIT_ULL(3)
-#define XHCI_SPURIOUS_SUCCESS BIT_ULL(4)
-/*
- * Certain Intel host controllers have a limit to the number of endpoint
- * contexts they can handle. Ideally, they would signal that they can't handle
- * anymore endpoint contexts by returning a Resource Error for the Configure
- * Endpoint command, but they don't. Instead they expect software to keep track
- * of the number of active endpoints for them, across configure endpoint
- * commands, reset device commands, disable slot commands, and address device
- * commands.
- */
-#define XHCI_EP_LIMIT_QUIRK BIT_ULL(5)
-#define XHCI_BROKEN_MSI BIT_ULL(6)
-#define XHCI_RESET_ON_RESUME BIT_ULL(7)
-#define XHCI_SW_BW_CHECKING BIT_ULL(8)
-#define XHCI_AMD_0x96_HOST BIT_ULL(9)
-#define XHCI_TRUST_TX_LENGTH BIT_ULL(10)
-#define XHCI_LPM_SUPPORT BIT_ULL(11)
-#define XHCI_INTEL_HOST BIT_ULL(12)
-#define XHCI_SPURIOUS_REBOOT BIT_ULL(13)
-#define XHCI_COMP_MODE_QUIRK BIT_ULL(14)
-#define XHCI_AVOID_BEI BIT_ULL(15)
-#define XHCI_PLAT BIT_ULL(16)
-#define XHCI_SLOW_SUSPEND BIT_ULL(17)
-#define XHCI_SPURIOUS_WAKEUP BIT_ULL(18)
-/* For controllers with a broken beyond repair streams implementation */
-#define XHCI_BROKEN_STREAMS BIT_ULL(19)
-#define XHCI_PME_STUCK_QUIRK BIT_ULL(20)
-#define XHCI_MTK_HOST BIT_ULL(21)
-#define XHCI_SSIC_PORT_UNUSED BIT_ULL(22)
-#define XHCI_NO_64BIT_SUPPORT BIT_ULL(23)
-#define XHCI_MISSING_CAS BIT_ULL(24)
-/* For controller with a broken Port Disable implementation */
-#define XHCI_BROKEN_PORT_PED BIT_ULL(25)
-#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 BIT_ULL(26)
-#define XHCI_U2_DISABLE_WAKE BIT_ULL(27)
-#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL BIT_ULL(28)
-#define XHCI_HW_LPM_DISABLE BIT_ULL(29)
-#define XHCI_SUSPEND_DELAY BIT_ULL(30)
-#define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31)
-#define XHCI_ZERO_64B_REGS BIT_ULL(32)
-#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
-#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
-#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
-#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
-#define XHCI_SKIP_PHY_INIT BIT_ULL(37)
-#define XHCI_DISABLE_SPARSE BIT_ULL(38)
-#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)
-#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
-#define XHCI_BROKEN_D3COLD BIT_ULL(41)
-#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
unsigned int num_active_eps;
unsigned int limit_active_eps;
@@ -1963,6 +1911,10 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
return xhci->main_hcd;
}
+/* For xhci-plat drivers */
+#define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv)
+#define xhci_to_priv(x) ((struct xhci_plat_priv *)(x)->priv)
+
#define xhci_dbg(xhci, fmt, args...) \
dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
#define xhci_err(xhci, fmt, args...) \
diff --git a/include/linux/usb/xhci-plat.h b/include/linux/usb/xhci-plat.h
new file mode 100644
index 0000000..906e907
--- /dev/null
+++ b/include/linux/usb/xhci-plat.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * xhci-plat.h - xHCI host controller driver platform Bus Glue.
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ */
+
+#ifndef _XHCI_PLAT_H
+#define _XHCI_PLAT_H
+
+#include <linux/types.h>
+#include <linux/usb/hcd.h>
+
+struct xhci_plat_priv {
+ const char *firmware_name;
+ unsigned long long quirks;
+ void (*plat_start)(struct usb_hcd *hcd);
+ int (*init_quirk)(struct usb_hcd *hcd);
+ int (*suspend_quirk)(struct usb_hcd *hcd);
+ int (*resume_quirk)(struct usb_hcd *hcd);
+};
+
+#endif /* _XHCI_PLAT_H */
diff --git a/include/linux/usb/xhci-quirks.h b/include/linux/usb/xhci-quirks.h
new file mode 100644
index 0000000..57ae0b1
--- /dev/null
+++ b/include/linux/usb/xhci-quirks.h
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * xHCI host controller driver quirks
+ *
+ * Copyright (C) 2008 Intel Corp.
+ */
+
+#ifndef _XHCI_QUIRKS_H
+#define _XHCI_QUIRKS_H
+
+#define XHCI_LINK_TRB_QUIRK BIT_ULL(0)
+#define XHCI_RESET_EP_QUIRK BIT_ULL(1)
+#define XHCI_NEC_HOST BIT_ULL(2)
+#define XHCI_AMD_PLL_FIX BIT_ULL(3)
+#define XHCI_SPURIOUS_SUCCESS BIT_ULL(4)
+/*
+ * Certain Intel host controllers have a limit to the number of endpoint
+ * contexts they can handle. Ideally, they would signal that they can't handle
+ * anymore endpoint contexts by returning a Resource Error for the Configure
+ * Endpoint command, but they don't. Instead they expect software to keep track
+ * of the number of active endpoints for them, across configure endpoint
+ * commands, reset device commands, disable slot commands, and address device
+ * commands.
+ */
+#define XHCI_EP_LIMIT_QUIRK BIT_ULL(5)
+#define XHCI_BROKEN_MSI BIT_ULL(6)
+#define XHCI_RESET_ON_RESUME BIT_ULL(7)
+#define XHCI_SW_BW_CHECKING BIT_ULL(8)
+#define XHCI_AMD_0x96_HOST BIT_ULL(9)
+#define XHCI_TRUST_TX_LENGTH BIT_ULL(10)
+#define XHCI_LPM_SUPPORT BIT_ULL(11)
+#define XHCI_INTEL_HOST BIT_ULL(12)
+#define XHCI_SPURIOUS_REBOOT BIT_ULL(13)
+#define XHCI_COMP_MODE_QUIRK BIT_ULL(14)
+#define XHCI_AVOID_BEI BIT_ULL(15)
+#define XHCI_PLAT BIT_ULL(16)
+#define XHCI_SLOW_SUSPEND BIT_ULL(17)
+#define XHCI_SPURIOUS_WAKEUP BIT_ULL(18)
+/* For controllers with a broken beyond repair streams implementation */
+#define XHCI_BROKEN_STREAMS BIT_ULL(19)
+#define XHCI_PME_STUCK_QUIRK BIT_ULL(20)
+#define XHCI_MTK_HOST BIT_ULL(21)
+#define XHCI_SSIC_PORT_UNUSED BIT_ULL(22)
+#define XHCI_NO_64BIT_SUPPORT BIT_ULL(23)
+#define XHCI_MISSING_CAS BIT_ULL(24)
+/* For controller with a broken Port Disable implementation */
+#define XHCI_BROKEN_PORT_PED BIT_ULL(25)
+#define XHCI_LIMIT_ENDPOINT_INTERVAL_7 BIT_ULL(26)
+#define XHCI_U2_DISABLE_WAKE BIT_ULL(27)
+#define XHCI_ASMEDIA_MODIFY_FLOWCONTROL BIT_ULL(28)
+#define XHCI_HW_LPM_DISABLE BIT_ULL(29)
+#define XHCI_SUSPEND_DELAY BIT_ULL(30)
+#define XHCI_INTEL_USB_ROLE_SW BIT_ULL(31)
+#define XHCI_ZERO_64B_REGS BIT_ULL(32)
+#define XHCI_DEFAULT_PM_RUNTIME_ALLOW BIT_ULL(33)
+#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
+#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
+#define XHCI_RENESAS_FW_QUIRK BIT_ULL(36)
+#define XHCI_SKIP_PHY_INIT BIT_ULL(37)
+#define XHCI_DISABLE_SPARSE BIT_ULL(38)
+#define XHCI_SG_TRB_CACHE_SIZE_QUIRK BIT_ULL(39)
+#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
+#define XHCI_BROKEN_D3COLD BIT_ULL(41)
+#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42)
+
+#endif /* _XHCI_QUIRKS_H */
--
2.7.4
Powered by blists - more mailing lists