Date:   Wed, 2 Mar 2022 14:03:18 +0200
From:   Heikki Krogerus <heikki.krogerus@...ux.intel.com>
To:     Xin Ji <xji@...logixsemi.com>
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        bliang@...logixsemi.com, qwen@...logixsemi.com,
        jli@...logixsemi.com, linux-kernel@...r.kernel.org,
        linux-usb@...r.kernel.org
Subject: Re: [PATCH v6 2/2] usb: typec: anx7411: Add Analogix PD ANX7411
 support

Hi,

This does not apply on top of Greg's latest usb-next branch. You need
to rebase this. There are also a few more nitpicks below.

On Wed, Feb 23, 2022 at 06:23:52PM +0800, Xin Ji wrote:
> diff --git a/drivers/usb/typec/anx7411.h b/drivers/usb/typec/anx7411.h
> new file mode 100644
> index 000000000000..cc0b7a570438
> --- /dev/null
> +++ b/drivers/usb/typec/anx7411.h
> @@ -0,0 +1,273 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +/*
> + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
> + *
> + */
> +
> +#ifndef __ANX7411_H__
> +#define __ANX7411_H__
> +
> +#define TCPC_ADDRESS1		0x58
> +#define TCPC_ADDRESS2		0x56
> +#define TCPC_ADDRESS3		0x54
> +#define TCPC_ADDRESS4		0x52
> +#define SPI_ADDRESS1		0x7e
> +#define SPI_ADDRESS2		0x6e
> +#define SPI_ADDRESS3		0x64
> +#define SPI_ADDRESS4		0x62
> +
> +struct anx7411_i2c_select {
> +	u8 tcpc_address;
> +	u8 spi_address;
> +};
> +
> +#define VENDOR_ID		0x1F29
> +#define PRODUCT_ID		0x7411

Please make that VENDOR_ID_<vendor name>, and the same with the
product ID.

> +/* TCPC register define */
> +
> +#define TCPC_ROLE_CONTROL	0x1A
> +
> +#define TCPC_COMMAND		0x23
> +#define TCPC_CMD_I2C_IDLE	0xFF
> +#define TCPC_CMD_LOOK4CONN	0x99
> +#define SINK_CTRL_EN		0x55
> +#define SINK_CTRL_DIS		0x44
> +
> +#define ANALOG_CTRL_10		0xAA

Those are TCPC commands and registers. I though I already asked that
you move the register and command definitions from
drivers/usb/typec/tcpm/tcpci.h to include/linux/usb/tcpci.h?

You need to do that in a separate patch, but I really think it would
be worth doing, even though there are only a few shared definitions
here.

> +#define STATUS_LEN		2
> +#define ALERT_0			0xCB
> +#define RECEIVED_MSG		BIT(7)
> +#define SOFTWARE_INT		BIT(6)
> +#define MSG_LEN			32
> +#define HEADER_LEN		2
> +#define MSG_HEADER		0x00
> +#define MSG_TYPE		0x01
> +#define MSG_RAWDATA		0x02
> +#define MSG_LEN_MASK		0x1F
> +
> +#define ALERT_1			0xCC
> +#define INTP_POW_ON		BIT(7)
> +#define INTP_POW_OFF		BIT(6)
> +
> +#define VBUS_THRESHOLD_H	0xDD
> +#define VBUS_THRESHOLD_L	0xDE
> +
> +#define FW_CTRL_0		0xF0
> +#define UNSTRUCT_VDM_EN		BIT(0)
> +#define DELAY_200MS		BIT(1)
> +#define VSAFE0			0
> +#define VSAFE1			BIT(2)
> +#define VSAFE2			BIT(3)
> +#define VSAFE3			(BIT(2) | BIT(3))
> +#define FRS_EN			BIT(7)
> +
> +#define FW_PARAM		0xF1
> +#define DONGLE_IOP		BIT(0)
> +
> +#define FW_CTRL_2		0xF7
> +#define SINK_CTRL_DIS_FLAG	BIT(5)
> +
> +/* SPI register define */
> +#define OCM_CTRL_0		0x6E
> +#define OCM_RESET		BIT(6)
> +
> +#define MAX_VOLTAGE		0xAC
> +#define MAX_POWER		0xAD
> +#define MIN_POWER		0xAE
> +
> +#define REQUEST_VOLTAGE		0xAF
> +#define VOLTAGE_UNIT		100 /* mV per unit */
> +
> +#define REQUEST_CURRENT		0xB1
> +#define CURRENT_UNIT		50 /* mA per unit */
> +
> +#define CMD_SEND_BUF		0xC0
> +#define CMD_RECV_BUF		0xE0
> +
> +#define REQ_VOL_20V_IN_100MV	0xC8
> +#define REQ_CUR_2_25A_IN_50MA	0x2D
> +#define REQ_CUR_3_25A_IN_50MA	0x41
> +
> +#define DEF_5V			5000
> +#define DEF_1_5A		1500
> +
> +enum anx7411_typec_message_type {
> +	TYPE_SRC_CAP = 0x00,
> +	TYPE_SNK_CAP = 0x01,
> +	TYPE_SNK_IDENTITY = 0x02,
> +	TYPE_SVID = 0x03,
> +	TYPE_SET_SNK_DP_CAP = 0x08,
> +	TYPE_PSWAP_REQ = 0x10,
> +	TYPE_DSWAP_REQ = 0x11,
> +	TYPE_VDM = 0x14,
> +	TYPE_OBJ_REQ = 0x16,
> +	TYPE_DP_ALT_ENTER = 0x19,
> +	TYPE_DP_DISCOVER_MODES_INFO = 0x27,
> +	TYPE_GET_DP_CONFIG = 0x29,
> +	TYPE_DP_CONFIGURE = 0x2A,
> +	TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E,
> +	TYPE_GET_DP_ALT_ENTER = 0x2F,
> +};
> +
> +#define REQUEST_CURRENT		0xB1
> +#define REQUEST_VOLTAGE		0xAF

Double definition - you already defined those two in this same file
above.

> +#define FW_CTRL_1		0xB2
> +#define AUTO_PD_EN		BIT(1)
> +#define TRYSRC_EN		BIT(2)
> +#define TRYSNK_EN		BIT(3)
> +#define FORCE_SEND_RDO		BIT(6)
> +
> +#define FW_VER			0xB4
> +#define FW_SUBVER		0xB5
> +
> +#define INT_MASK		0xB6
> +#define INT_STS			0xB7
> +#define OCM_BOOT_UP		BIT(0)
> +#define OC_OV_EVENT		BIT(1)
> +#define VCONN_CHANGE		BIT(2)
> +#define VBUS_CHANGE		BIT(3)
> +#define CC_STATUS_CHANGE	BIT(4)
> +#define DATA_ROLE_CHANGE	BIT(5)
> +#define PR_CONSUMER_GOT_POWER	BIT(6)
> +#define HPD_STATUS_CHANGE	BIT(7)
> +
> +#define SYSTEM_STSTUS		0xB8
> +/* 0: SINK off; 1: SINK on */
> +#define SINK_STATUS		BIT(1)
> +/* 0: VCONN off; 1: VCONN on*/
> +#define VCONN_STATUS		BIT(2)
> +/* 0: vbus off; 1: vbus on*/
> +#define VBUS_STATUS		BIT(3)
> +/* 1: host; 0:device*/
> +#define DATA_ROLE		BIT(5)
> +/* 0: Chunking; 1: Unchunked*/
> +#define SUPPORT_UNCHUNKING	BIT(6)
> +/* 0: HPD low; 1: HPD high*/
> +#define HPD_STATUS		BIT(7)
> +
> +#define DATA_DFP		1
> +#define DATA_UFP		2
> +#define POWER_SOURCE		1
> +#define POWER_SINK		2
> +
> +#define CC_STATUS		0xB9
> +#define CC1_RD			BIT(0)
> +#define CC2_RD			BIT(4)
> +#define CC1_RA			BIT(1)
> +#define CC2_RA			BIT(5)
> +#define CC1_RD			BIT(0)
> +#define CC1_RP(cc)		(((cc) >> 2) & 0x03)
> +#define CC2_RP(cc)		(((cc) >> 6) & 0x03)
> +
> +#define PD_REV_INIT		0xBA
> +
> +#define PD_EXT_MSG_CTRL		0xBB
> +#define SRC_CAP_EXT_REPLY	BIT(0)
> +#define MANUFACTURER_INFO_REPLY	BIT(1)
> +#define BATTERY_STS_REPLY	BIT(2)
> +#define BATTERY_CAP_REPLY	BIT(3)
> +#define ALERT_REPLY		BIT(4)
> +#define STATUS_REPLY		BIT(5)
> +#define PPS_STATUS_REPLY	BIT(6)
> +#define SNK_CAP_EXT_REPLY	BIT(7)
> +
> +#define NO_CONNECT		0x00
> +#define USB3_1_CONNECTED	0x01
> +#define DP_ALT_4LANES		0x02
> +#define USB3_1_DP_2LANES	0x03
> +#define CC1_CONNECTED		0x01
> +#define CC2_CONNECTED		0x02
> +#define SELECT_PIN_ASSIGMENT_C	0x04
> +#define SELECT_PIN_ASSIGMENT_D	0x08
> +#define SELECT_PIN_ASSIGMENT_E	0x10
> +#define SELECT_PIN_ASSIGMENT_U	0x00
> +#define REDRIVER_ADDRESS	0x20
> +#define REDRIVER_OFFSET		0x00
> +
> +#define DP_SVID			0xFF01
> +#define VDM_ACK			0x40
> +#define VDM_CMD_RES		0x00
> +#define VDM_CMD_DIS_ID		0x01
> +#define VDM_CMD_DIS_SVID	0x02
> +#define VDM_CMD_DIS_MOD		0x03
> +#define VDM_CMD_ENTER_MODE	0x04
> +#define VDM_CMD_EXIT_MODE	0x05
> +#define VDM_CMD_ATTENTION	0x06
> +#define VDM_CMD_GET_STS		0x10
> +#define VDM_CMD_AND_ACK_MASK	0x5F
> +
> +#define MAX_ALTMODE		2
> +
> +#define HAS_SOURCE_CAP		BIT(0)
> +#define HAS_SINK_CAP		BIT(1)
> +#define HAS_SINK_WATT		BIT(2)
> +
> +enum anx7411_psy_state {
> +	/* copy from drivers/usb/typec/tcpm */
> +	ANX7411_PSY_OFFLINE = 0,
> +	ANX7411_PSY_FIXED_ONLINE,
> +
> +	/* private */
> +	/* PD keep in, but disconnct power to bq25700,
> +	 * this state can be active when higher capacity adapter plug in,
> +	 * and change to ONLINE state when higher capacity adapter plug out
> +	 */
> +	ANX7411_PSY_HANG = 0xff,
> +};
> +
> +struct typec_params {
> +	int request_current; /* ma */
> +	int request_voltage; /* mv */
> +	int cc_connect;
> +	int cc_orientation_valid;
> +	int cc_status;
> +	int data_role;
> +	int power_role;
> +	int vconn_role;
> +	int dp_altmode_enter;
> +	int cust_altmode_enter;
> +	struct usb_role_switch *role_sw;
> +	struct typec_port *port;
> +	struct typec_partner *partner;
> +	struct typec_mux *typec_mux;
> +	struct typec_switch *typec_switch;
> +	struct typec_altmode *amode[MAX_ALTMODE];
> +	struct typec_altmode *port_amode[MAX_ALTMODE];
> +	struct typec_displayport_data data;
> +	int pin_assignment;
> +	struct typec_capability caps;
> +	u32 src_pdo[PDO_MAX_OBJECTS];
> +	u32 sink_pdo[PDO_MAX_OBJECTS];
> +	u8 caps_flags;
> +	u8 src_pdo_nr;
> +	u8 sink_pdo_nr;
> +	u8 sink_watt;
> +	u8 sink_voltage;
> +};
> +
> +struct anx7411_data {
> +	int fw_version;
> +	int fw_subversion;
> +	struct i2c_client *tcpc_client;
> +	struct i2c_client *spi_client;
> +	struct gpio_desc *intp_gpiod;
> +	struct fwnode_handle *connector_fwnode;
> +	struct typec_params typec;
> +	int intp_irq;
> +	struct work_struct work;
> +	struct workqueue_struct *workqueue;
> +	/* Lock for interrupt work queue */
> +	struct mutex lock;
> +
> +	enum anx7411_psy_state psy_online;
> +	enum power_supply_usb_type usb_type;
> +	struct power_supply *psy;
> +	struct power_supply_desc psy_desc;
> +	struct device *dev;
> +};
> +
> +#endif /* __ANX7411_H__ */

thanks,

-- 
heikki

Powered by blists - more mailing lists