| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220304080348.218581-6-krzysztof.kozlowski@canonical.com>
Date: Fri, 4 Mar 2022 09:03:47 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Alim Akhtar <alim.akhtar@...sung.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 6/7] tty: serial: samsung: constify variables and pointers
Constify variables, data pointed by several pointers and
"udivslot_table" static array. This makes code a bit safer.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>
---
drivers/tty/serial/samsung_tty.c | 38 ++++++++++++++++----------------
1 file changed, 19 insertions(+), 19 deletions(-)
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index eecefff5c4a4..00e7c34fad46 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -164,7 +164,7 @@ static void s3c24xx_serial_tx_chars(struct s3c24xx_uart_port *ourport);
#define portaddrl(port, reg) \
((unsigned long *)(unsigned long)((port)->membase + (reg)))
-static u32 rd_reg(struct uart_port *port, u32 reg)
+static u32 rd_reg(const struct uart_port *port, u32 reg)
{
switch (port->iotype) {
case UPIO_MEM:
@@ -179,7 +179,7 @@ static u32 rd_reg(struct uart_port *port, u32 reg)
#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
-static void wr_reg(struct uart_port *port, u32 reg, u32 val)
+static void wr_reg(const struct uart_port *port, u32 reg, u32 val)
{
switch (port->iotype) {
case UPIO_MEM:
@@ -195,7 +195,7 @@ static void wr_reg(struct uart_port *port, u32 reg, u32 val)
/* Byte-order aware bit setting/clearing functions. */
-static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
+static inline void s3c24xx_set_bit(const struct uart_port *port, int idx,
unsigned int reg)
{
unsigned long flags;
@@ -208,7 +208,7 @@ static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
local_irq_restore(flags);
}
-static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
+static inline void s3c24xx_clear_bit(const struct uart_port *port, int idx,
unsigned int reg)
{
unsigned long flags;
@@ -221,19 +221,19 @@ static inline void s3c24xx_clear_bit(struct uart_port *port, int idx,
local_irq_restore(flags);
}
-static inline struct s3c24xx_uart_port *to_ourport(const struct uart_port *port)
+static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
{
return container_of(port, struct s3c24xx_uart_port, port);
}
/* translate a port to the device name */
-static inline const char *s3c24xx_serial_portname(struct uart_port *port)
+static inline const char *s3c24xx_serial_portname(const struct uart_port *port)
{
return to_platform_device(port->dev)->name;
}
-static int s3c24xx_serial_txempty_nofifo(struct uart_port *port)
+static int s3c24xx_serial_txempty_nofifo(const struct uart_port *port)
{
return rd_regl(port, S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE;
}
@@ -358,7 +358,7 @@ static void s3c24xx_serial_tx_dma_complete(void *args)
static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
{
- struct uart_port *port = &ourport->port;
+ const struct uart_port *port = &ourport->port;
u32 ucon;
/* Mask Tx interrupt */
@@ -387,7 +387,7 @@ static void enable_tx_dma(struct s3c24xx_uart_port *ourport)
static void enable_tx_pio(struct s3c24xx_uart_port *ourport)
{
- struct uart_port *port = &ourport->port;
+ const struct uart_port *port = &ourport->port;
u32 ucon, ufcon;
/* Set ufcon txtrig */
@@ -580,9 +580,9 @@ static inline const struct s3c24xx_uart_info
}
static inline const struct s3c2410_uartcfg
- *s3c24xx_port_to_cfg(struct uart_port *port)
+ *s3c24xx_port_to_cfg(const struct uart_port *port)
{
- struct s3c24xx_uart_port *ourport;
+ const struct s3c24xx_uart_port *ourport;
if (port->dev == NULL)
return NULL;
@@ -591,7 +591,7 @@ static inline const struct s3c2410_uartcfg
return ourport->cfg;
}
-static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
+static int s3c24xx_serial_rx_fifocnt(const struct s3c24xx_uart_port *ourport,
unsigned long ufstat)
{
const struct s3c24xx_uart_info *info = ourport->info;
@@ -947,8 +947,8 @@ static irqreturn_t s3c24xx_serial_tx_irq(int irq, void *id)
/* interrupt handler for s3c64xx and later SoC's.*/
static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
{
- struct s3c24xx_uart_port *ourport = id;
- struct uart_port *port = &ourport->port;
+ const struct s3c24xx_uart_port *ourport = id;
+ const struct uart_port *port = &ourport->port;
unsigned int pend = rd_regl(port, S3C64XX_UINTP);
irqreturn_t ret = IRQ_HANDLED;
@@ -966,8 +966,8 @@ static irqreturn_t s3c64xx_serial_handle_irq(int irq, void *id)
/* interrupt handler for Apple SoC's.*/
static irqreturn_t apple_serial_handle_irq(int irq, void *id)
{
- struct s3c24xx_uart_port *ourport = id;
- struct uart_port *port = &ourport->port;
+ const struct s3c24xx_uart_port *ourport = id;
+ const struct uart_port *port = &ourport->port;
unsigned int pend = rd_regl(port, S3C2410_UTRSTAT);
irqreturn_t ret = IRQ_NONE;
@@ -1499,7 +1499,7 @@ static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
* This table takes the fractional value of the baud divisor and gives
* the recommended setting for the UDIVSLOT register.
*/
-static u16 udivslot_table[16] = {
+static const u16 udivslot_table[16] = {
[0] = 0x0000,
[1] = 0x0080,
[2] = 0x0808,
@@ -1675,7 +1675,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
static const char *s3c24xx_serial_type(struct uart_port *port)
{
- struct s3c24xx_uart_port *ourport = to_ourport(port);
+ const struct s3c24xx_uart_port *ourport = to_ourport(port);
switch (ourport->info->type) {
case TYPE_S3C24XX:
@@ -2450,7 +2450,7 @@ s3c24xx_port_configured(unsigned int ucon)
static int s3c24xx_serial_get_poll_char(struct uart_port *port)
{
- struct s3c24xx_uart_port *ourport = to_ourport(port);
+ const struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned int ufstat;
ufstat = rd_regl(port, S3C2410_UFSTAT);
--
2.32.0
Powered by blists - more mailing lists