| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b4aca5f1-38c0-8197-6914-0a39b7755180@microchip.com>
Date: Fri, 4 Mar 2022 08:31:21 +0000
From: <Claudiu.Beznea@...rochip.com>
To: <michael@...le.cc>, <Kavyasree.Kotagiri@...rochip.com>,
<Nicolas.Ferre@...rochip.com>
CC: <arnd@...db.de>, <olof@...om.net>, <soc@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski@...onical.com>,
<alexandre.belloni@...tlin.com>
Subject: Re: [PATCH v1 6/6] ARM: dts: lan966x: add basic Kontron KSwitch D10
support
On 03.03.2022 18:03, Michael Walle wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Add basic support for the Kontron KSwitch D10 MMT 6G-2GS which
> features 6 Gigabit copper ports and two SFP cages. For now the
> following is working:
> - Kernel console
> - SFP cages I2C bus and mux
> - SPI
> - SGPIO
> - Watchdog
>
> Signed-off-by: Michael Walle <michael@...le.cc>
> ---
> arch/arm/boot/dts/Makefile | 3 +-
> ...lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts | 159 ++++++++++++++++++
> 2 files changed, 161 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 085c43649d44..86dd0f9804ee 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -739,7 +739,8 @@ dtb-$(CONFIG_SOC_IMX7ULP) += \
> imx7ulp-com.dtb \
> imx7ulp-evk.dtb
> dtb-$(CONFIG_SOC_LAN966) += \
> - lan966x-pcb8291.dtb
> + lan966x-pcb8291.dtb \
> + lan966x-kontron-kswitch-d10-mmt-6g-2gs.dtb
> dtb-$(CONFIG_SOC_LS1021A) += \
> ls1021a-moxa-uc-8410a.dtb \
> ls1021a-qds.dtb \
> diff --git a/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
> new file mode 100644
> index 000000000000..958678dec7ad
> --- /dev/null
> +++ b/arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
> @@ -0,0 +1,159 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Device Tree file for the Kontron KSwitch D10 MMT 6G-2GS
> + */
> +
> +/dts-v1/;
> +#include "lan966x.dtsi"
> +
> +/ {
> + model = "Kontron KSwitch D10 MMT 6G-2GS";
> + compatible = "kontron,kswitch-d10-mmt-6g-2gs", "kontron,s1921",
> + "microchip,lan9668", "microchip,lan966";
> +
> + aliases {
> + serial0 = &usart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + gpio-restart {
> + compatible = "gpio-restart";
> + gpios = <&gpio 56 GPIO_ACTIVE_LOW>;
> + priority = <200>;
> + };
> +
> + i2cmux {
> + compatible = "i2c-mux-gpio";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + mux-gpios = <&sgpio_out 3 2 GPIO_ACTIVE_HIGH>,
> + <&sgpio_out 3 3 GPIO_ACTIVE_HIGH>;
> + i2c-parent = <&i2c4>;
> +
> + i2c4_0: i2c@1 {
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> +
> + i2c4_1: i2c@2 {
> + reg = <2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +
> + sfp0: sfp0 {
> + compatible = "sff,sfp";
> + i2c-bus = <&i2c4_0>;
> + los-gpios = <&sgpio_in 1 0 GPIO_ACTIVE_HIGH>;
> + mod-def0-gpios = <&sgpio_in 1 1 GPIO_ACTIVE_LOW>;
> + maximum-power-milliwatt = <2500>;
> + tx-disable-gpios = <&sgpio_out 3 0 GPIO_ACTIVE_LOW>;
> + tx-fault-gpios = <&sgpio_in 0 2 GPIO_ACTIVE_HIGH>;
> + rate-select0-gpios = <&sgpio_out 2 0 GPIO_ACTIVE_HIGH>;
> + rate-select1-gpios = <&sgpio_out 2 1 GPIO_ACTIVE_HIGH>;
> + };
> +
> + sfp1: sfp1 {
> + compatible = "sff,sfp";
> + i2c-bus = <&i2c4_1>;
> + los-gpios = <&sgpio_in 1 2 GPIO_ACTIVE_HIGH>;
> + mod-def0-gpios = <&sgpio_in 1 3 GPIO_ACTIVE_LOW>;
> + maximum-power-milliwatt = <2500>;
> + tx-disable-gpios = <&sgpio_out 3 1 GPIO_ACTIVE_LOW>;
> + tx-fault-gpios = <&sgpio_in 0 3 GPIO_ACTIVE_HIGH>;
> + rate-select0-gpios = <&sgpio_out 2 2 GPIO_ACTIVE_HIGH>;
> + rate-select1-gpios = <&sgpio_out 2 3 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&flx0 {
> + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
> + status = "okay";
> +};
> +
> +&flx3 {
> + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
> + status = "okay";
> +};
> +
> +&flx4 {
> + atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
> + status = "okay";
> +};
Although there is 1:1 mapping b/w ids of flexcoms and the embedded blocks
(flxX has usartX, i2cX, spiX) and there is nothing wrong with the approach
here I found a bit hard to follow if the correspondent embedded block
(i2c, spi, usart) is enabled or not.
> +
> +&gpio {
> + usart0_pins: usart0-pins {
> + /* RXD, TXD */
> + pins = "GPIO_25", "GPIO_26";
> + function = "fc0_b";
> + };
> +
> + sgpio_a_pins: sgpio-a-pins {
> + /* SCK, D0, D1, LD */
> + pins = "GPIO_32", "GPIO_33", "GPIO_34";
> + function = "sgpio_a";
> + };
> +
> + sgpio_b_pins: sgpio-b-pins {
> + /* SCK, D0, D1, LD */
> + pins = "GPIO_64";
> + function = "sgpio_b";
> + };
> +
> + fc3_b_pins: fc3-b-spi-pins {
> + /* SCK, MISO, MOSI */
> + pins = "GPIO_51", "GPIO_52", "GPIO_53";
> + function = "fc3_b";
> + };
> +
> + fc4_b_pins: fc4-b-i2c-pins {
> + /* RXD, TXD */
> + pins = "GPIO_57", "GPIO_58";
> + function = "fc4_b";
> + };
> +};
> +
> +&i2c4 {
> + pinctrl-0 = <&fc4_b_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&usart0 {
> + pinctrl-0 = <&usart0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&sgpio {
> + pinctrl-0 = <&sgpio_a_pins>, <&sgpio_b_pins>;
> + pinctrl-names = "default";
> + bus-frequency = <8000000>;
> + /* arbitrary range because all GPIOs are in software mode */
> + microchip,sgpio-port-ranges = <0 11>;
> + status = "okay";
> +};
> +
> +&sgpio_in {
> + ngpios = <128>;
> +};
> +
> +&sgpio_out {
> + ngpios = <128>;
> +};
> +
> +&spi3 {
> + pinctrl-0 = <&fc3_b_pins>;
> + pinctrl-names = "default";
> + cs-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&watchdog {
> + status = "okay";
> +};
> --
> 2.30.2
>
Powered by blists - more mailing lists