| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CA+icZUV840wd-jmYkcXVuG0iSsGRLhZ8p+pgbiEABWOmuFQcNA@mail.gmail.com>
Date: Sat, 5 Mar 2022 12:11:22 +0100
From: Sedat Dilek <sedat.dilek@...il.com>
To: Peter Zijlstra <peterz@...radead.org>,
Ingo Molnar <mingo@...hat.com>,
Arnaldo Carvalho de Melo <acme@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
Jiri Olsa <jolsa@...nel.org>,
Namhyung Kim <namhyung@...nel.org>
Cc: linux-perf-users@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [Linux-v5.17-rc6] Building tools/perf with perl v5.34
On Sat, Mar 5, 2022 at 9:26 AM Sedat Dilek <sedat.dilek@...il.com> wrote:
>
> On Sat, Mar 5, 2022 at 8:57 AM Sedat Dilek <sedat.dilek@...il.com> wrote:
> >
> > On Sat, Mar 5, 2022 at 8:52 AM Sedat Dilek <sedat.dilek@...il.com> wrote:
> > >
> > > Hi,
> > >
> > > I am here on Debian/unstable AMD64 which switched over to perl v5.34
> > > in February 2022.
> > >
> > > Unfortunately, my perf does not build with this (lib)perl version:
> > >
> > > $ ~/bin/perf -vv
> > > perf version 5.17-rc6
> > > dwarf: [ on ] # HAVE_DWARF_SUPPORT
> > > dwarf_getlocations: [ on ] # HAVE_DWARF_GETLOCATIONS_SUPPORT
> > > glibc: [ on ] # HAVE_GLIBC_SUPPORT
> > > syscall_table: [ on ] # HAVE_SYSCALL_TABLE_SUPPORT
> > > libbfd: [ on ] # HAVE_LIBBFD_SUPPORT
> > > libelf: [ on ] # HAVE_LIBELF_SUPPORT
> > > libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
> > > numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
> > > libperl: [ OFF ] # HAVE_LIBPERL_SUPPORT
> > > libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
> > > libslang: [ on ] # HAVE_SLANG_SUPPORT
> > > libcrypto: [ on ] # HAVE_LIBCRYPTO_SUPPORT
> > > libunwind: [ on ] # HAVE_LIBUNWIND_SUPPORT
> > > libdw-dwarf-unwind: [ on ] # HAVE_DWARF_SUPPORT
> > > zlib: [ on ] # HAVE_ZLIB_SUPPORT
> > > lzma: [ on ] # HAVE_LZMA_SUPPORT
> > > get_cpuid: [ on ] # HAVE_AUXTRACE_SUPPORT
> > > bpf: [ on ] # HAVE_LIBBPF_SUPPORT
> > > aio: [ on ] # HAVE_AIO_SUPPORT
> > > zstd: [ on ] # HAVE_ZSTD_SUPPORT
> > > libpfm4: [ OFF ] # HAVE_LIBPFM
> > >
> > > $ grep libperl ../make-log_perf-python3.10-install_bin.txt
> > > 9:Makefile.config:788: Missing perl devel files. Disabling perl
> > > scripting support, please install perl-ExtUtils-Embed/libperl-dev
> > > 22:... libperl: [ OFF ]
> > >
> > > Checking for these requirements:
> > >
> > > # dpkg -l | grep perl | grep 5.34 | awk '/^ii/ {print $1 " " $2 " "
> > > $3}' | column -t
> > > ii libperl-dev:amd64 5.34.0-3
> > > ii libperl5.34:amd64 5.34.0-3
> > > ii perl 5.34.0-3
> > > ii perl-base 5.34.0-3
> > > ii perl-modules-5.34 5.34.0-3
> > >
> > > # dpkg -L perl-modules-5.34 | grep -i ExtUtils | grep -i Embed
> > > /usr/share/perl/5.34.0/ExtUtils/Embed.pm
> > >
> > > Can you please comment on this?
> > >
> > > Thanks.
> > >
> > > Regards,
> > > - Sedat -
> > >
> > > [1] https://unix.stackexchange.com/questions/167292/what-is-debian-equivalent-of-rpm-package-perl-extutils-embed
> >
> > My command-line:
> >
> > cd /path/to/linux.git
> >
> > $ make V=1 -j4 HOSTCC=clang HOSTCXX=clang++ HOSTLD=ld.lld
> > HOSTAR=llvm-ar CC=clang LD=ld.lld AR=llvm-ar NM=llvm-nm
> > OBJCOPY=llvm-objcopy OBJDUMP=llvm-objdump OBJSIZE=llvm-size
> > READELF=llvm-readelf STRIP=llvm-strip LLVM_IAS=1 -C tools/perf
> > PYTHON=python3.10 install-bin
> >
> > I use the -gnu-std-11 patchset plus some own:
> >
> > $ git log --oneline v5.17-rc6.. | grep 'std=gnu11'
> > 05d8e9b88918 tools: libtraceevent: Use -std=gnu11
> > ee44279e6b01 tools: libsubcmd: Use -std=gnu11
> > 411fa2d6da5c tools: libapi: Use -std=gnu11
> > 3f0092b7e1b9 tools: perf: Use -std=gnu11
> > 0cf56ddf2b41 tools: libbpf: Use -std=gnu11
> > 96a4222bdd4c Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS
> > 6a7cc105b238 Kbuild: move to -std=gnu11
> >
> > If this matters...
> >
>
> [ tools/perf/Makefile.config ]
>
> ifdef NO_LIBPERL
> CFLAGS += -DNO_LIBPERL
> else
> PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
> PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
> PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
> PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null)
> PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS))
> PERL_EMBED_CCOPTS := $(filter-out -flto=auto -ffat-lto-objects,
> $(PERL_EMBED_CCOPTS))
> PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS))
> FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
>
> ifneq ($(feature-libperl), 1)
> CFLAGS += -DNO_LIBPERL
> NO_LIBPERL := 1
> msg := $(warning Missing perl devel files. Disabling perl
> scripting support, please install perl-ExtUtils-Embed/libperl-dev);
> else
> LDFLAGS += $(PERL_EMBED_LDFLAGS)
> EXTLIBS += $(PERL_EMBED_LIBADD)
> CFLAGS += -DHAVE_LIBPERL_SUPPORT
> $(call detected,CONFIG_LIBPERL)
> endif
> endif
>
> $ perl -MExtUtils::Embed -e ldopts
> -Wl,-E -fstack-protector-strong -L/usr/local/lib
> -L/usr/lib/x86_64-linux-gnu/perl/5.34/CORE -lperl -ldl -lm -lpthread
> -lc -lcrypt
>
> $ perl -MExtUtils::Embed -e ccopts
> -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fwrapv -fno-strict-aliasing -pipe
> -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64
> -I/usr/lib/x86_64-linux-gnu/perl/5.34/CORE
>
Looks like an issue when using LLVM/Clang - distro or selfmade does not matter.
With GCC I can see libperl enabled.
- Sedat -
Powered by blists - more mailing lists