linux-kernel - [PATCH] ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20220307113827.2419331-1-eugen.hristev@microchip.com>
Date:   Mon, 7 Mar 2022 13:38:27 +0200
From:   Eugen Hristev <eugen.hristev@...rochip.com>
To:     <nicolas.ferre@...rochip.com>
CC:     <devicetree@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <claudiu.beznea@...rochip.com>,
        <tudor.ambarus@...rochip.com>, <robh+dt@...nel.org>,
        Eugen Hristev <eugen.hristev@...rochip.com>
Subject: [PATCH] ARM: dts: at91: sama7g5ek: enable pull-up on flexcom3 console lines

Flexcom3 is used as board console serial. There are no pull-ups on these
lines on the board. This means that if a cable is not connected (that has
pull-ups included), stray characters could appear on the console as the
floating pins voltage levels are interpreted as incoming characters.
To avoid this problem, enable the internal pull-ups on these lines.

Signed-off-by: Eugen Hristev <eugen.hristev@...rochip.com>
---
 arch/arm/boot/dts/at91-sama7g5ek.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts
index 08685a10eda1d..dd047a8523907 100644
--- a/arch/arm/boot/dts/at91-sama7g5ek.dts
+++ b/arch/arm/boot/dts/at91-sama7g5ek.dts
@@ -495,7 +495,7 @@ pinctrl_flx0_default: flx0_default {
 	pinctrl_flx3_default: flx3_default {
 		pinmux = <PIN_PD16__FLEXCOM3_IO0>,
 			 <PIN_PD17__FLEXCOM3_IO1>;
-		bias-disable;
+		bias-pull-up;
 	};
 
 	pinctrl_flx4_default: flx4_default {
-- 
2.25.1