linux-kernel - Re: [PATCH V1] extcon/usb: Remove disable irq operation in system sleep.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <0b24b79b-b412-7e2b-c0a6-5b6f9ed5a90d@ti.com>
Date:   Mon, 7 Mar 2022 18:51:11 +0530
From:   Vignesh Raghavendra <vigneshr@...com>
To:     Roger Quadros <rogerq@...nel.org>,
        Bruce Chen <brucechen251@...il.com>, <bruce.chen@...soc.com>,
        <myungjoo.ham@...sung.com>, <cw00.choi@...sung.com>,
        <linux-kernel@...r.kernel.org>,
        Aswath Govindraju <a-govindraju@...com>
CC:     <orsonzhai@...il.com>, <gengcixi@...il.com>,
        <baolin.wang7@...il.com>, <zhang.lyra@...il.com>
Subject: Re: [PATCH V1] extcon/usb: Remove disable irq operation in system
 sleep.

Hi,

On 03/03/22 2:50 pm, Roger Quadros wrote:
> +TI folks Aswath & Vignesh.
> 

Thanks for looping in.

> Hi Bruce,
> 
> On 03/03/2022 09:36, Bruce Chen wrote:
>> From: Bruce Chen <bruce.chen@...soc.com>
>>
>> If disable vbus/id irq, it will lead to wakeup system fail
>> in unisoc platform. In unisoc platform, Irq enable and irq
>> wakeup are the same interrupt line. So remove disable vbus/id
>> irq operation is a way to solve the issue> 
>> Signed-off-by: Bruce Chen <bruce.chen@...soc.com>
>> ---
>>  drivers/extcon/extcon-usb-gpio.c | 15 ---------------
>>  1 file changed, 15 deletions(-)
>>
>> diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c
>> index f2b65d9..40d967a 100644
>> --- a/drivers/extcon/extcon-usb-gpio.c
>> +++ b/drivers/extcon/extcon-usb-gpio.c
>> @@ -226,16 +226,6 @@ static int usb_extcon_suspend(struct device *dev)
>>  		}
>>  	}
>>  
>> -	/*
>> -	 * We don't want to process any IRQs after this point
>> -	 * as GPIOs used behind I2C subsystem might not be
>> -	 * accessible until resume completes. So disable IRQ.
>> -	 */
> 
> I think the reason this was added was that if USB cable is plugged/unplugged
> while system was suspending it was causing some faults on TI DRA7 EVM
> at usb_irq_handler()/usb_extcon_detect_cable() when it tries to read GPIO status
> when I2C based GPIO controller was used but already suspended.
> But looks like disabling the IRQ is not the right approach either so your patch
> is right.
> 
> However I'm not sure if the above issue will still exist on DRA7 and other TI EVMS
> using ID/VBUS GPIO over I2C device.
> 
> Let's wait for Aswath/Vignesh to confirm. If no issues I'm OK with this patch.


Support for suspend/resume on DRA7x isn't really maintained actively.
Hence, cannot really test the patch. But, no objections for this patch
either.

[...]

Regards
Vignesh