linux-kernel - Re: [PATCH 2/2] mfd: arizona-spi: Add Android board ACPI table handling

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ac21f173-2cba-0ddc-67db-27e06950c2d4@redhat.com>
Date:   Mon, 7 Mar 2022 15:55:27 +0100
From:   Hans de Goede <hdegoede@...hat.com>
To:     Lee Jones <lee.jones@...aro.org>
Cc:     patches@...nsource.cirrus.com, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] mfd: arizona-spi: Add Android board ACPI table
 handling

Hi,

On 3/7/22 15:51, Lee Jones wrote:
> On Wed, 23 Feb 2022, Hans de Goede wrote:
> 
>> x86/ACPI boards with an arizona WM5102 codec ship with either Windows or
>> Android as factory installed OS.
>>
>> The ACPI fwnode for the codec on Android boards misses 2 things compared
>> to the Windows boards (this is hardcoded in the Android board kernels):
>>
>> 1. There is no CLKE ACPI method to enabe the 32 KHz clock the codec needs
>>    for jack-detection.
>>
>> 2. The GPIOs used by the codec are not listed in the fwnode for the codec.
>>
>> The ACPI tables on x86/ACPI boards shipped with Android being incomplete
>> happens a lot. The special drivers/platform/x86/x86-android-tablets.c
>> module contains DMI based per model handling to compensate for this.
>>
>> This module will enable the 32KHz clock through the pinctrl framework
>> to fix 1. and it will also register a gpio-lookup table for all GPIOs
>> needed by the codec + machine driver, including the GPIOs coming from
>> the codec itself.
>>
>> Add an arizona_spi_acpi_android_probe() function which waits for the
>> x86-android-tablets to have set things up before continue with probing
>> the arizona WM5102 codec.
>>
>> Signed-off-by: Hans de Goede <hdegoede@...hat.com>
>> ---
>>  drivers/mfd/arizona-spi.c | 34 +++++++++++++++++++++++++++++++++-
>>  1 file changed, 33 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
>> index 238355542ab1..2c686e71db21 100644
>> --- a/drivers/mfd/arizona-spi.c
>> +++ b/drivers/mfd/arizona-spi.c
>> @@ -81,6 +81,29 @@ static int arizona_spi_acpi_windows_probe(struct arizona *arizona)
>>  	return 0;
>>  }
>>  
>> +/* For ACPI tables from boards which ship with Android as factory OS */
>> +static int arizona_spi_acpi_android_probe(struct arizona *arizona)
>> +{
>> +	int ret;
>> +
>> +	/*
>> +	 * Get the reset GPIO, treating -ENOENT as -EPROBE_DEFER to wait for
>> +	 * the x86-android-tablets module to register the board specific GPIO
>> +	 * lookup table.
>> +	 */
>> +	arizona->pdata.reset = devm_gpiod_get(arizona->dev, "reset", GPIOD_OUT_LOW);
>> +	if (IS_ERR(arizona->pdata.reset)) {
>> +		ret = PTR_ERR(arizona->pdata.reset);
>> +		if (ret == -ENOENT) {
>> +			dev_info_once(arizona->dev, "Deferring probe till GPIO lookup is registered\n");
> 
> Nit: How many chars is this?

105.

> I thought we were drawing the line at 100 these days?

We have an exception for log lines, since we don't want to break them
up because that makes grepping for them impossible.

> Does this patch pass checkpatch.pl?

Yes because of the exception for log lines:

[hans@x1 linux]$ scripts/checkpatch.pl 0001-mfd-arizona-spi-Add-Android-board-ACPI-table-handlin.patch 
total: 0 errors, 0 warnings, 54 lines checked

0001-mfd-arizona-spi-Add-Android-board-ACPI-table-handlin.patch has no obvious style problems and is ready for submission.

Regards,

Hans


> 
>> +			ret = -EPROBE_DEFER;
>> +		}
>> +		return dev_err_probe(arizona->dev, ret, "getting reset GPIO\n");
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>>  /*
>>   * The AOSP 3.5 mm Headset: Accessory Specification gives the following values:
>>   * Function A Play/Pause:           0 ohm
>> @@ -102,9 +125,14 @@ static const struct arizona_micd_range arizona_micd_aosp_ranges[] = {
>>  
>>  static int arizona_spi_acpi_probe(struct arizona *arizona)
>>  {
>> +	struct acpi_device *adev = ACPI_COMPANION(arizona->dev);
>>  	int ret;
>>  
>> -	ret = arizona_spi_acpi_windows_probe(arizona);
>> +	if (acpi_dev_hid_uid_match(adev, "10WM5102", NULL))
>> +		ret = arizona_spi_acpi_android_probe(arizona);
>> +	else
>> +		ret = arizona_spi_acpi_windows_probe(arizona);
>> +
>>  	if (ret)
>>  		return ret;
>>  
>> @@ -142,6 +170,10 @@ static const struct acpi_device_id arizona_acpi_match[] = {
>>  		.id = "WM510205",
>>  		.driver_data = WM5102,
>>  	},
>> +	{
>> +		.id = "10WM5102",
>> +		.driver_data = WM5102,
>> +	},
>>  	{ }
>>  };
>>  MODULE_DEVICE_TABLE(acpi, arizona_acpi_match);
>