| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20220307223625.2456-1-kirill.shutemov@linux.intel.com>
Date: Tue, 8 Mar 2022 01:36:25 +0300
From: "Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>
To: xiaoyao.li@...el.com
Cc: aarcange@...hat.com, ak@...ux.intel.com, bp@...en8.de,
brijesh.singh@....com, dan.j.williams@...el.com,
dave.hansen@...el.com, david@...hat.com, hpa@...or.com,
jgross@...e.com, jmattson@...gle.com, joro@...tes.org,
jpoimboe@...hat.com, kirill.shutemov@...ux.intel.com,
knsathya@...nel.org, linux-kernel@...r.kernel.org, luto@...nel.org,
mingo@...hat.com, pbonzini@...hat.com, peterz@...radead.org,
sathyanarayanan.kuppuswamy@...ux.intel.com, sdeep@...are.com,
seanjc@...gle.com, tglx@...utronix.de, thomas.lendacky@....com,
tony.luck@...el.com, vkuznets@...hat.com, wanpengli@...cent.com,
x86@...nel.org
Subject: [PATCHv5.1 23/30] x86/boot: Avoid #VE during boot for TDX platforms
From: Sean Christopherson <seanjc@...gle.com>
There are a few MSRs and control register bits that the kernel
normally needs to modify during boot. But, TDX disallows
modification of these registers to help provide consistent security
guarantees. Fortunately, TDX ensures that these are all in the correct
state before the kernel loads, which means the kernel does not need to
modify them.
The conditions to avoid are:
* Any writes to the EFER MSR
* Clearing CR4.MCE
This theoretically makes the guest boot more fragile. If, for instance,
EFER was set up incorrectly and a WRMSR was performed, it will trigger
early exception panic or a triple fault, if it's before early
exceptions are set up. However, this is likely to trip up the guest
BIOS long before control reaches the kernel. In any case, these kinds
of problems are unlikely to occur in production environments, and
developers have good debug tools to fix them quickly.
Change the common boot code to work on TDX and non-TDX systems.
This should have no functional effect on non-TDX systems.
Signed-off-by: Sean Christopherson <seanjc@...gle.com>
Reviewed-by: Andi Kleen <ak@...ux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@...el.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@...ux.intel.com>
---
v5.1:
- Fix typo in commit message: CR3.MCE -> CR4.MCE.
---
arch/x86/Kconfig | 1 +
arch/x86/boot/compressed/head_64.S | 20 ++++++++++++++++++--
arch/x86/boot/compressed/pgtable.h | 2 +-
arch/x86/kernel/head_64.S | 28 ++++++++++++++++++++++++++--
arch/x86/realmode/rm/trampoline_64.S | 13 ++++++++++++-
5 files changed, 58 insertions(+), 6 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index d2f45e58e846..98efb35ed7b1 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -886,6 +886,7 @@ config INTEL_TDX_GUEST
depends on X86_X2APIC
select ARCH_HAS_CC_PLATFORM
select DYNAMIC_PHYSICAL_MASK
+ select X86_MCE
help
Support running as a guest under Intel TDX. Without this support,
the guest kernel can not boot or run under TDX.
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index d0c3d33f3542..6d903b2fc544 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -643,12 +643,28 @@ SYM_CODE_START(trampoline_32bit_src)
movl $MSR_EFER, %ecx
rdmsr
btsl $_EFER_LME, %eax
+ /* Avoid writing EFER if no change was made (for TDX guest) */
+ jc 1f
wrmsr
- popl %edx
+1: popl %edx
popl %ecx
+#ifdef CONFIG_X86_MCE
+ /*
+ * Preserve CR4.MCE if the kernel will enable #MC support.
+ * Clearing MCE may fault in some environments (that also force #MC
+ * support). Any machine check that occurs before #MC support is fully
+ * configured will crash the system regardless of the CR4.MCE value set
+ * here.
+ */
+ movl %cr4, %eax
+ andl $X86_CR4_MCE, %eax
+#else
+ movl $0, %eax
+#endif
+
/* Enable PAE and LA57 (if required) paging modes */
- movl $X86_CR4_PAE, %eax
+ orl $X86_CR4_PAE, %eax
testl %edx, %edx
jz 1f
orl $X86_CR4_LA57, %eax
diff --git a/arch/x86/boot/compressed/pgtable.h b/arch/x86/boot/compressed/pgtable.h
index 6ff7e81b5628..cc9b2529a086 100644
--- a/arch/x86/boot/compressed/pgtable.h
+++ b/arch/x86/boot/compressed/pgtable.h
@@ -6,7 +6,7 @@
#define TRAMPOLINE_32BIT_PGTABLE_OFFSET 0
#define TRAMPOLINE_32BIT_CODE_OFFSET PAGE_SIZE
-#define TRAMPOLINE_32BIT_CODE_SIZE 0x70
+#define TRAMPOLINE_32BIT_CODE_SIZE 0x80
#define TRAMPOLINE_32BIT_STACK_END TRAMPOLINE_32BIT_SIZE
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 9c63fc5988cd..184b7468ea76 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -140,8 +140,22 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
addq $(init_top_pgt - __START_KERNEL_map), %rax
1:
+#ifdef CONFIG_X86_MCE
+ /*
+ * Preserve CR4.MCE if the kernel will enable #MC support.
+ * Clearing MCE may fault in some environments (that also force #MC
+ * support). Any machine check that occurs before #MC support is fully
+ * configured will crash the system regardless of the CR4.MCE value set
+ * here.
+ */
+ movq %cr4, %rcx
+ andl $X86_CR4_MCE, %ecx
+#else
+ movl $0, %ecx
+#endif
+
/* Enable PAE mode, PGE and LA57 */
- movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx
+ orl $(X86_CR4_PAE | X86_CR4_PGE), %ecx
#ifdef CONFIG_X86_5LEVEL
testl $1, __pgtable_l5_enabled(%rip)
jz 1f
@@ -246,13 +260,23 @@ SYM_INNER_LABEL(secondary_startup_64_no_verify, SYM_L_GLOBAL)
/* Setup EFER (Extended Feature Enable Register) */
movl $MSR_EFER, %ecx
rdmsr
+ /*
+ * Preserve current value of EFER for comparison and to skip
+ * EFER writes if no change was made (for TDX guest)
+ */
+ movl %eax, %edx
btsl $_EFER_SCE, %eax /* Enable System Call */
btl $20,%edi /* No Execute supported? */
jnc 1f
btsl $_EFER_NX, %eax
btsq $_PAGE_BIT_NX,early_pmd_flags(%rip)
-1: wrmsr /* Make changes effective */
+ /* Avoid writing EFER if no change was made (for TDX guest) */
+1: cmpl %edx, %eax
+ je 1f
+ xor %edx, %edx
+ wrmsr /* Make changes effective */
+1:
/* Setup cr0 */
movl $CR0_STATE, %eax
/* Make changes effective */
diff --git a/arch/x86/realmode/rm/trampoline_64.S b/arch/x86/realmode/rm/trampoline_64.S
index d380f2d1fd23..e38d61d6562e 100644
--- a/arch/x86/realmode/rm/trampoline_64.S
+++ b/arch/x86/realmode/rm/trampoline_64.S
@@ -143,11 +143,22 @@ SYM_CODE_START(startup_32)
movl %eax, %cr3
# Set up EFER
+ movl $MSR_EFER, %ecx
+ rdmsr
+ /*
+ * Skip writing to EFER if the register already has desired
+ * value (to avoid #VE for the TDX guest).
+ */
+ cmp pa_tr_efer, %eax
+ jne .Lwrite_efer
+ cmp pa_tr_efer + 4, %edx
+ je .Ldone_efer
+.Lwrite_efer:
movl pa_tr_efer, %eax
movl pa_tr_efer + 4, %edx
- movl $MSR_EFER, %ecx
wrmsr
+.Ldone_efer:
# Enable paging and in turn activate Long Mode.
movl $CR0_STATE, %eax
movl %eax, %cr0
--
2.34.1
Powered by blists - more mailing lists