lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1646644054-24421-4-git-send-email-hongxing.zhu@nxp.com>
Date:   Mon,  7 Mar 2022 17:07:30 +0800
From:   Richard Zhu <hongxing.zhu@....com>
To:     p.zabel@...gutronix.de, l.stach@...gutronix.de,
        bhelgaas@...gle.com, lorenzo.pieralisi@....com, robh@...nel.org,
        shawnguo@...nel.org, vkoul@...nel.org,
        alexander.stein@...tq-group.com
Cc:     linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-pci@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org, kernel@...gutronix.de,
        linux-imx@....com, Richard Zhu <hongxing.zhu@....com>
Subject: [PATCH v2 3/7] phy: freescale: imx8m-pcie: Add iMX8MP PCIe PHY support

Add the i.MX8MP PCIe PHY support

Signed-off-by: Richard Zhu <hongxing.zhu@....com>
---
 drivers/phy/freescale/phy-fsl-imx8m-pcie.c | 205 ++++++++++++++++-----
 1 file changed, 163 insertions(+), 42 deletions(-)

diff --git a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
index 04b1aafb29f4..3d01da4323a6 100644
--- a/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
+++ b/drivers/phy/freescale/phy-fsl-imx8m-pcie.c
@@ -11,6 +11,8 @@
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx7-iomuxc-gpr.h>
 #include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
@@ -30,12 +32,10 @@
 #define IMX8MM_PCIE_PHY_CMN_REG065	0x194
 #define  ANA_AUX_RX_TERM		(BIT(7) | BIT(4))
 #define  ANA_AUX_TX_LVL			GENMASK(3, 0)
-#define IMX8MM_PCIE_PHY_CMN_REG75	0x1D4
-#define  PCIE_PHY_CMN_REG75_PLL_DONE	0x3
+#define IMX8MM_PCIE_PHY_CMN_REG075	0x1D4
+#define  ANA_PLL_DONE			0x3
 #define PCIE_PHY_TRSV_REG5		0x414
-#define  PCIE_PHY_TRSV_REG5_GEN1_DEEMP	0x2D
 #define PCIE_PHY_TRSV_REG6		0x418
-#define  PCIE_PHY_TRSV_REG6_GEN2_DEEMP	0xF
 
 #define IMX8MM_GPR_PCIE_REF_CLK_SEL	GENMASK(25, 24)
 #define IMX8MM_GPR_PCIE_REF_CLK_PLL	FIELD_PREP(IMX8MM_GPR_PCIE_REF_CLK_SEL, 0x3)
@@ -46,16 +46,43 @@
 #define IMX8MM_GPR_PCIE_SSC_EN		BIT(16)
 #define IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE	BIT(9)
 
+#define IMX8MP_GPR_REG0			0x0
+#define IMX8MP_GPR_CLK_MOD_EN		BIT(0)
+#define IMX8MP_GPR_PHY_APB_RST		BIT(4)
+#define IMX8MP_GPR_PHY_INIT_RST		BIT(5)
+#define IMX8MP_GPR_REG1			0x4
+#define IMX8MP_GPR_PM_EN_CORE_CLK	BIT(0)
+#define IMX8MP_GPR_PLL_LOCK		BIT(13)
+#define IMX8MP_GPR_REG2			0x8
+#define IMX8MP_GPR_P_PLL_MASK		GENMASK(5, 0)
+#define IMX8MP_GPR_M_PLL_MASK		GENMASK(15, 6)
+#define IMX8MP_GPR_S_PLL_MASK		GENMASK(18, 16)
+#define IMX8MP_GPR_P_PLL		(0xc << 0)
+#define IMX8MP_GPR_M_PLL		(0x320 << 6)
+#define IMX8MP_GPR_S_PLL		(0x4 << 16)
+#define IMX8MP_GPR_REG3			0xc
+#define IMX8MP_GPR_PLL_CKE		BIT(17)
+#define IMX8MP_GPR_PLL_RST		BIT(31)
+
+enum imx8_pcie_phy_type {
+	IMX8MM,
+	IMX8MP,
+};
+
 struct imx8_pcie_phy {
 	void __iomem		*base;
+	struct device		*dev;
 	struct clk		*clk;
 	struct phy		*phy;
+	struct regmap		*hsio_blk_ctrl;
 	struct regmap		*iomuxc_gpr;
 	struct reset_control	*reset;
+	struct reset_control	*perst;
 	u32			refclk_pad_mode;
 	u32			tx_deemph_gen1;
 	u32			tx_deemph_gen2;
 	bool			clkreq_unused;
+	enum imx8_pcie_phy_type	variant;
 };
 
 static int imx8_pcie_phy_init(struct phy *phy)
@@ -67,6 +94,87 @@ static int imx8_pcie_phy_init(struct phy *phy)
 	reset_control_assert(imx8_phy->reset);
 
 	pad_mode = imx8_phy->refclk_pad_mode;
+	switch (imx8_phy->variant) {
+	case IMX8MM:
+		/* Tune PHY de-emphasis setting to pass PCIe compliance. */
+		if (imx8_phy->tx_deemph_gen1)
+			writel(imx8_phy->tx_deemph_gen1,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG5);
+		if (imx8_phy->tx_deemph_gen2)
+			writel(imx8_phy->tx_deemph_gen2,
+			       imx8_phy->base + PCIE_PHY_TRSV_REG6);
+		break;
+	case IMX8MP:
+		reset_control_assert(imx8_phy->perst);
+		/* Set P=12,M=800,S=4 and must set ICP=2'b01. */
+		regmap_update_bits(imx8_phy->hsio_blk_ctrl, IMX8MP_GPR_REG2,
+				   IMX8MP_GPR_P_PLL_MASK |
+				   IMX8MP_GPR_M_PLL_MASK |
+				   IMX8MP_GPR_S_PLL_MASK,
+				   IMX8MP_GPR_P_PLL |
+				   IMX8MP_GPR_M_PLL |
+				   IMX8MP_GPR_S_PLL);
+		/* wait greater than 1/F_FREF =1/2MHZ=0.5us */
+		udelay(1);
+
+		regmap_update_bits(imx8_phy->hsio_blk_ctrl, IMX8MP_GPR_REG3,
+				   IMX8MP_GPR_PLL_RST,
+				   IMX8MP_GPR_PLL_RST);
+		udelay(10);
+
+		/* Set 1 to pll_cke of GPR_REG3 */
+		regmap_update_bits(imx8_phy->hsio_blk_ctrl, IMX8MP_GPR_REG3,
+				   IMX8MP_GPR_PLL_CKE,
+				   IMX8MP_GPR_PLL_CKE);
+
+		/* Lock time should be greater than 300cycle=300*0.5us=150us */
+		ret = regmap_read_poll_timeout(imx8_phy->hsio_blk_ctrl,
+					     IMX8MP_GPR_REG1, val,
+					     val & IMX8MP_GPR_PLL_LOCK,
+					     10, 1000);
+		if (ret) {
+			dev_err(imx8_phy->dev, "PCIe PLL lock timeout\n");
+			return ret;
+		}
+
+		/* pcie_clock_module_en */
+		regmap_update_bits(imx8_phy->hsio_blk_ctrl, IMX8MP_GPR_REG0,
+				   IMX8MP_GPR_CLK_MOD_EN,
+				   IMX8MP_GPR_CLK_MOD_EN);
+		udelay(10);
+
+		reset_control_deassert(imx8_phy->reset);
+		reset_control_deassert(imx8_phy->perst);
+
+		/* release pcie_phy_apb_reset and pcie_phy_init_resetn */
+		regmap_update_bits(imx8_phy->hsio_blk_ctrl, IMX8MP_GPR_REG0,
+				   IMX8MP_GPR_PHY_APB_RST |
+				   IMX8MP_GPR_PHY_INIT_RST,
+				   IMX8MP_GPR_PHY_APB_RST |
+				   IMX8MP_GPR_PHY_INIT_RST);
+		break;
+	}
+
+	if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT) {
+		/* Configure the pad as input */
+		val = readl(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
+		writel(val & ~ANA_PLL_CLK_OUT_TO_EXT_IO_EN,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
+	} else if (pad_mode == IMX8_PCIE_REFCLK_PAD_OUTPUT) {
+		/* Configure the PHY to output the refclock via pad */
+		writel(ANA_PLL_CLK_OUT_TO_EXT_IO_EN,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
+		writel(ANA_PLL_CLK_OUT_TO_EXT_IO_SEL,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG062);
+		writel(AUX_PLL_REFCLK_SEL_SYS_PLL,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG063);
+		val = ANA_AUX_RX_TX_SEL_TX | ANA_AUX_TX_TERM;
+		writel(val | ANA_AUX_RX_TERM_GND_EN,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG064);
+		writel(ANA_AUX_RX_TERM | ANA_AUX_TX_LVL,
+		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
+	}
+
 	/* Set AUX_EN_OVERRIDE 1'b0, when the CLKREQ# isn't hooked */
 	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
 			   IMX8MM_GPR_PCIE_AUX_EN_OVERRIDE,
@@ -91,42 +199,30 @@ static int imx8_pcie_phy_init(struct phy *phy)
 	regmap_update_bits(imx8_phy->iomuxc_gpr, IOMUXC_GPR14,
 			   IMX8MM_GPR_PCIE_CMN_RST,
 			   IMX8MM_GPR_PCIE_CMN_RST);
-	usleep_range(200, 500);
 
-	if (pad_mode == IMX8_PCIE_REFCLK_PAD_INPUT) {
-		/* Configure the pad as input */
-		val = readl(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
-		writel(val & ~ANA_PLL_CLK_OUT_TO_EXT_IO_EN,
-		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
-	} else if (pad_mode == IMX8_PCIE_REFCLK_PAD_OUTPUT) {
-		/* Configure the PHY to output the refclock via pad */
-		writel(ANA_PLL_CLK_OUT_TO_EXT_IO_EN,
-		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG061);
-		writel(ANA_PLL_CLK_OUT_TO_EXT_IO_SEL,
-		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG062);
-		writel(AUX_PLL_REFCLK_SEL_SYS_PLL,
-		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG063);
-		val = ANA_AUX_RX_TX_SEL_TX | ANA_AUX_TX_TERM;
-		writel(val | ANA_AUX_RX_TERM_GND_EN,
-		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG064);
-		writel(ANA_AUX_RX_TERM | ANA_AUX_TX_LVL,
-		       imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG065);
+	switch (imx8_phy->variant) {
+	case IMX8MM:
+		reset_control_deassert(imx8_phy->reset);
+		usleep_range(200, 500);
+		break;
+
+	case IMX8MP:
+		/* wait for core_clk enabled */
+		ret = regmap_read_poll_timeout(imx8_phy->hsio_blk_ctrl,
+					     IMX8MP_GPR_REG1, val,
+					     val & IMX8MP_GPR_PM_EN_CORE_CLK,
+					     10, 20000);
+		if (ret) {
+			dev_err(imx8_phy->dev, "PCIe CORE CLK enable failed\n");
+			return ret;
+		}
+
+		break;
 	}
 
-	/* Tune PHY de-emphasis setting to pass PCIe compliance. */
-	if (imx8_phy->tx_deemph_gen1)
-		writel(imx8_phy->tx_deemph_gen1,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG5);
-	if (imx8_phy->tx_deemph_gen2)
-		writel(imx8_phy->tx_deemph_gen2,
-		       imx8_phy->base + PCIE_PHY_TRSV_REG6);
-
-	reset_control_deassert(imx8_phy->reset);
-
 	/* Polling to check the phy is ready or not. */
-	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG75,
-				 val, val == PCIE_PHY_CMN_REG75_PLL_DONE,
-				 10, 20000);
+	ret = readl_poll_timeout(imx8_phy->base + IMX8MM_PCIE_PHY_CMN_REG075,
+				 val, val == ANA_PLL_DONE, 10, 20000);
 	return ret;
 }
 
@@ -153,18 +249,33 @@ static const struct phy_ops imx8_pcie_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static const struct of_device_id imx8_pcie_phy_of_match[] = {
+	{.compatible = "fsl,imx8mm-pcie-phy", .data = (void *)IMX8MM},
+	{.compatible = "fsl,imx8mp-pcie-phy", .data = (void *)IMX8MP},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
+
 static int imx8_pcie_phy_probe(struct platform_device *pdev)
 {
 	struct phy_provider *phy_provider;
 	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
 	struct device_node *np = dev->of_node;
 	struct imx8_pcie_phy *imx8_phy;
 	struct resource *res;
 
+	of_id = of_match_device(imx8_pcie_phy_of_match, dev);
+	if (!of_id)
+		return -EINVAL;
+
 	imx8_phy = devm_kzalloc(dev, sizeof(*imx8_phy), GFP_KERNEL);
 	if (!imx8_phy)
 		return -ENOMEM;
 
+	imx8_phy->dev = dev;
+	imx8_phy->variant = (enum imx8_pcie_phy_type)of_id->data;
+
 	/* get PHY refclk pad mode */
 	of_property_read_u32(np, "fsl,refclk-pad-mode",
 			     &imx8_phy->refclk_pad_mode);
@@ -201,6 +312,22 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 		dev_err(dev, "Failed to get PCIEPHY reset control\n");
 		return PTR_ERR(imx8_phy->reset);
 	}
+	if (imx8_phy->variant == IMX8MP) {
+		/* Grab HSIO MIX config register range */
+		imx8_phy->hsio_blk_ctrl =
+			 syscon_regmap_lookup_by_compatible("fsl,imx8mp-hsio-blk-ctrl");
+		if (IS_ERR(imx8_phy->hsio_blk_ctrl)) {
+			dev_err(dev, "unable to find hsio mix registers\n");
+			return PTR_ERR(imx8_phy->hsio_blk_ctrl);
+		}
+
+		imx8_phy->perst =
+			devm_reset_control_get_exclusive(dev, "perst");
+		if (IS_ERR(imx8_phy->perst)) {
+			dev_err(dev, "Failed to get PCIEPHY perst control\n");
+			return PTR_ERR(imx8_phy->perst);
+		}
+	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	imx8_phy->base = devm_ioremap_resource(dev, res);
@@ -218,12 +345,6 @@ static int imx8_pcie_phy_probe(struct platform_device *pdev)
 	return PTR_ERR_OR_ZERO(phy_provider);
 }
 
-static const struct of_device_id imx8_pcie_phy_of_match[] = {
-	{.compatible = "fsl,imx8mm-pcie-phy",},
-	{ },
-};
-MODULE_DEVICE_TABLE(of, imx8_pcie_phy_of_match);
-
 static struct platform_driver imx8_pcie_phy_driver = {
 	.probe	= imx8_pcie_phy_probe,
 	.driver = {
-- 
2.25.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ