linux-kernel - [PATCH v5 3/5] arm64/dts/qcom/sdm845: remove assigned-clock-rate property for mdp clk

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1646758500-3776-4-git-send-email-quic_vpolimer@quicinc.com>
Date:   Tue,  8 Mar 2022 22:24:58 +0530
From:   Vinod Polimera <quic_vpolimer@...cinc.com>
To:     dri-devel@...ts.freedesktop.org, linux-arm-msm@...r.kernel.org,
        freedreno@...ts.freedesktop.org, devicetree@...r.kernel.org
Cc:     Vinod Polimera <quic_vpolimer@...cinc.com>,
        linux-kernel@...r.kernel.org, robdclark@...il.com,
        dianders@...omium.org, swboyd@...omium.org,
        quic_kalyant@...cinc.com
Subject: [PATCH v5 3/5] arm64/dts/qcom/sdm845: remove assigned-clock-rate property for mdp clk

Kernel clock driver assumes that initial rate is the
max rate for that clock and was not allowing it to scale
beyond the assigned clock value.

Drop the assigned clock rate property and vote on the mdp clock as per
calculated value during the usecase.

Fixes: 08c2a076d1("arm64: dts: qcom: sdm845: Add dpu to sdm845 dts file")
Signed-off-by: Vinod Polimera <quic_vpolimer@...cinc.com>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 0d6286d..80dc486 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4181,9 +4181,6 @@
 				 <&dispcc DISP_CC_MDSS_MDP_CLK>;
 			clock-names = "iface", "core";
 
-			assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>;
-			assigned-clock-rates = <300000000>;
-
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
@@ -4214,10 +4211,8 @@
 					 <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
 				clock-names = "gcc-bus", "iface", "bus", "core", "vsync";
 
-				assigned-clocks = <&dispcc DISP_CC_MDSS_MDP_CLK>,
-						  <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
-				assigned-clock-rates = <300000000>,
-						       <19200000>;
+				assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+				assigned-clock-rates = <19200000>;
 				operating-points-v2 = <&mdp_opp_table>;
 				power-domains = <&rpmhpd SDM845_CX>;
 
-- 
2.7.4