Message-ID: <CAOvb9yjbm=u1W_dyW1J--=HEMbcuUnZ521YkHu1moXyMyctv0g@mail.gmail.com>
Date:   Mon, 7 Mar 2022 19:17:24 -0800
From:   Won Chung <wonchung@...gle.com>
To:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc:     Heikki Krogerus <heikki.krogerus@...ux.intel.com>,
        "Rafael J . Wysocki" <rafael@...nel.org>,
        Benson Leung <bleung@...omium.org>,
        Prashant Malani <pmalani@...omium.org>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] driver core: Add sysfs support for physical location
 of a device

Hi Greg,

Thank you for the review.

I have a few questions on your comments.


On Sun, Mar 6, 2022 at 6:04 AM Greg Kroah-Hartman
<gregkh@...uxfoundation.org> wrote:
>
> On Sat, Mar 05, 2022 at 12:42:58AM +0000, Won Chung wrote:
> > When ACPI table includes _PLD fields for a device, create a new
> > directory (physical_location) in sysfs to share _PLD fields.
> >
> > Currently without PLD information, when there are multiple of same
> > devices, it is hard to distinguish which device corresponds to which
> > physical device at which location. For example, when there are two Type
> > C connectors, it is hard to find out which connector corresponds to the
> > Type C port on the left panel versus the Type C port on the right panel.
> > With PLD information provided, we can determine which specific device at
> > which location is doing what.
> >
> > _PLD output includes much more fields, but only generic fields are added
> > and exposed to sysfs, so that non-ACPI devices can also support it in
> > the future. The minimal generic fields needed for locating a device are
> > the following.
> > - panel
> > - vertical_position
> > - horizontal_position
> > - dock
> > - lid
> >
> > Signed-off-by: Won Chung <wonchung@...gle.com>
> > ---
> >
> > Changes from v2
> > - Use sysfs_emit to create files.
> > - Correct mix of spaces and tabs.
> >
> > Changes from v1
> > - Correct directory names in Documentation.
> > - Clarify namings in core.c
> >
> >  .../testing/sysfs-devices-physical_location   |  42 ++++++
> >  drivers/base/core.c                           | 139 ++++++++++++++++++
> >  include/linux/device.h                        |  73 +++++++++
> >  3 files changed, 254 insertions(+)
> >  create mode 100644 Documentation/ABI/testing/sysfs-devices-physical_location
> >
> > diff --git a/Documentation/ABI/testing/sysfs-devices-physical_location b/Documentation/ABI/testing/sysfs-devices-physical_location
> > new file mode 100644
> > index 000000000000..202324b87083
> > --- /dev/null
> > +++ b/Documentation/ABI/testing/sysfs-devices-physical_location
> > @@ -0,0 +1,42 @@
> > +What:                /sys/devices/.../physical_location
> > +Date:                March 2022
> > +Contact:     Won Chung <wonchung@...gle.com>
> > +Description:
> > +             This directory contains information on physical location of
> > +             the device connection point with respect to the system's
> > +             housing.
> > +
> > +What:                /sys/devices/.../physical_location/panel
> > +Date:                March 2022
> > +Contact:     Won Chung <wonchung@...gle.com>
> > +Description:
> > +             Describes which panel surface of the system’s housing the
> > +             device connection point resides on.
> > +
> > +What:                /sys/devices/.../physical_location/vertical_position
> > +Date:                March 2022
> > +Contact:     Won Chung <wonchung@...gle.com>
> > +Description:
> > +             Describes vertical position of the device connection point on
> > +             the panel surface.
> > +
> > +What:                /sys/devices/.../physical_location/horizontal_position
> > +Date:                March 2022
> > +Contact:     Won Chung <wonchung@...gle.com>
> > +Description:
> > +             Describes horizontal position of the device connection point on
> > +             the panel surface.
> > +
> > +What:                /sys/devices/.../physical_location/dock
> > +Date:                March 2022
> > +Contact:     Won Chung <wonchung@...gle.com>
> > +Description:
> > +             "Yes" if the device connection point resides in a docking
> > +             station or a port replicator. "No" otherwise.
> > +
> > +What:                /sys/devices/.../physical_location/lid
> > +Date:                March 2022
> > +Contact:     Won Chung <wonchung@...gle.com>
> > +Description:
> > +             "Yes" if the device connection point resides on the lid of
> > +             laptop system. "No" otherwise.
> > diff --git a/drivers/base/core.c b/drivers/base/core.c
> > index 7bb957b11861..9cfa71ad21f3 100644
> > --- a/drivers/base/core.c
> > +++ b/drivers/base/core.c
> > @@ -2466,6 +2466,136 @@ static ssize_t removable_show(struct device *dev, struct device_attribute *attr,
> >  }
> >  static DEVICE_ATTR_RO(removable);
> >
> > +static int dev_add_physical_location(struct device *dev)
> > +{
> > +#if defined(CONFIG_ACPI)
> > +     struct acpi_pld_info *pld;
> > +     acpi_status status;
> > +
> > +     if (!has_acpi_companion(dev))
> > +             return 0;
> > +
> > +     status = acpi_get_physical_device_location(ACPI_HANDLE(dev), &pld);
> > +     if (ACPI_FAILURE(status) || !pld)
> > +             return 0;
> > +
> > +     dev->location = (struct device_location) {
> > +             .panel = pld->panel,
> > +             .vertical_position = pld->vertical_position,
> > +             .horizontal_position = pld->horizontal_position,
> > +             .dock = pld->dock,
> > +             .lid = pld->lid,
> > +     };
>
> Is this a memcpy()?  Ick, that's odd.
>
> > +
> > +     return 1;
>
> Kernel functions do not return "1" as success.  Or as an error.
> Positive numbers are ONLY for when to return the number of bytes
> consumed/written or the like.
>
> > +#else
>
> I have asked multiple times to not put #ifdef in .c files.  I can't take
> this patch for that fact alone (also big hint, if acpi is not enabled,
> loads of these functions and the structure itself should not be present
> at all...)
>
>
>
>
>
> > +     return 0;
> > +#endif
> > +}
> > +
> > +static ssize_t panel_show(struct device *dev, struct device_attribute *attr,
> > +     char *buf)
> > +{
> > +     const char *panel;
> > +
> > +     switch (dev->location.panel) {
> > +     case DEVICE_PANEL_TOP:
> > +             panel = "top";
> > +             break;
> > +     case DEVICE_PANEL_BOTTOM:
> > +             panel = "bottom";
> > +             break;
> > +     case DEVICE_PANEL_LEFT:
> > +             panel = "left";
> > +             break;
> > +     case DEVICE_PANEL_RIGHT:
> > +             panel = "right";
> > +             break;
> > +     case DEVICE_PANEL_FRONT:
> > +             panel = "front";
> > +             break;
> > +     case DEVICE_PANEL_BACK:
> > +             panel = "back";
> > +             break;
> > +     default:
> > +             panel = "unknown";
> > +     }
> > +     return sysfs_emit(buf, "%s\n", panel);
> > +}
> > +static DEVICE_ATTR_RO(panel);
> > +
> > +static ssize_t vertical_position_show(struct device *dev,
> > +     struct device_attribute *attr, char *buf)
> > +{
> > +     const char *vertical_position;
> > +
> > +     switch (dev->location.vertical_position) {
> > +     case DEVICE_VERT_POS_UPPER:
> > +             vertical_position = "upper";
> > +             break;
> > +     case DEVICE_VERT_POS_CENTER:
> > +             vertical_position = "center";
> > +             break;
> > +     case DEVICE_VERT_POS_LOWER:
> > +             vertical_position = "lower";
> > +             break;
> > +     default:
> > +             vertical_position = "unknown";
> > +     }
> > +     return sysfs_emit(buf, "%s\n", vertical_position);
> > +}
> > +static DEVICE_ATTR_RO(vertical_position);
> > +
> > +static ssize_t horizontal_position_show(struct device *dev,
> > +     struct device_attribute *attr, char *buf)
> > +{
> > +     const char *horizontal_position;
> > +
> > +     switch (dev->location.horizontal_position) {
> > +     case DEVICE_HORI_POS_LEFT:
> > +             horizontal_position = "left";
> > +             break;
> > +     case DEVICE_HORI_POS_CENTER:
> > +             horizontal_position = "center";
> > +             break;
> > +     case DEVICE_HORI_POS_RIGHT:
> > +             horizontal_position = "right";
> > +             break;
> > +     default:
> > +             horizontal_position = "unknown";
> > +     }
> > +     return sysfs_emit(buf, "%s\n", horizontal_position);
> > +}
> > +static DEVICE_ATTR_RO(horizontal_position);
> > +
> > +static ssize_t dock_show(struct device *dev, struct device_attribute *attr,
> > +     char *buf)
>
> Did you run your patch through checkpatch.pl?
>
> Please do so.
>

I think I did run checkpatch.pl. I tried again but there is no issue
other than a warning that the maintainers list may need to be updated
due to a new file. Do you think there is a style issue here?

> > +{
> > +     return sysfs_emit(buf, "%s\n", dev->location.dock ? "yes" : "no");
> > +}
> > +static DEVICE_ATTR_RO(dock);
> > +
> > +static ssize_t lid_show(struct device *dev, struct device_attribute *attr,
> > +     char *buf)
> > +{
> > +     return sysfs_emit(buf, "%s\n", dev->location.lid ? "yes" : "no");
> > +}
> > +static DEVICE_ATTR_RO(lid);
> > +
> > +static struct attribute *dev_attr_physical_location[] = {
> > +     &dev_attr_panel.attr,
> > +     &dev_attr_vertical_position.attr,
> > +     &dev_attr_horizontal_position.attr,
> > +     &dev_attr_dock.attr,
> > +     &dev_attr_lid.attr,
> > +     NULL,
> > +};
> > +
> > +static const struct attribute_group dev_attr_physical_location_group = {
> > +     .name = "physical_location",
>
> I'm all for being verbose, but why not just "location"?  What other type
> of location is there for a device?

For USB ports, there seems to be a "location" file for u32 value
representing ACPI PLD group token and group location.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/usb/core/port.c#n20

Would you prefer renaming that "location" file to something else and
have this one as "location" directory? Or would "physical_location" be
okay?

>
> > +     .attrs = dev_attr_physical_location,
> > +};
> > +
> >  int device_add_groups(struct device *dev, const struct attribute_group **groups)
> >  {
> >       return sysfs_create_groups(&dev->kobj, groups);
> > @@ -2649,8 +2779,17 @@ static int device_add_attrs(struct device *dev)
> >                       goto err_remove_dev_waiting_for_supplier;
> >       }
> >
> > +     if (dev_add_physical_location(dev)) {
> > +             error = device_add_group(dev,
> > +                     &dev_attr_physical_location_group);
> > +             if (error)
> > +                     goto err_remove_dev_physical_location;
> > +     }
> > +
> >       return 0;
> >
> > + err_remove_dev_physical_location:
> > +     device_remove_group(dev, &dev_attr_physical_location_group);
> >   err_remove_dev_waiting_for_supplier:
> >       device_remove_file(dev, &dev_attr_waiting_for_supplier);
> >   err_remove_dev_online:
> > diff --git a/include/linux/device.h b/include/linux/device.h
> > index 93459724dcde..424be9cb735e 100644
> > --- a/include/linux/device.h
> > +++ b/include/linux/device.h
> > @@ -386,6 +386,75 @@ struct dev_msi_info {
> >  #endif
> >  };
> >
> > +/**
> > + * enum device_location_panel - Describes which panel surface of the system's
> > + * housing the device connection point resides on.
> > + * @DEVICE_PANEL_TOP: Device connection point is on the top panel.
> > + * @DEVICE_PANEL_BOTTOM: Device connection point is on the bottom panel.
> > + * @DEVICE_PANEL_LEFT: Device connection point is on the left panel.
> > + * @DEVICE_PANEL_RIGHT: Device connection point is on the right panel.
> > + * @DEVICE_PANEL_FRONT: Device connection point is on the front panel.
> > + * @DEVICE_PANEL_BACK: Device connection point is on the back panel.
> > + * @DEVICE_PANEL_UNKNOWN: The panel with device connection point is unknown.
> > + */
> > +enum device_location_panel {
> > +     DEVICE_PANEL_TOP,
> > +     DEVICE_PANEL_BOTTOM,
> > +     DEVICE_PANEL_LEFT,
> > +     DEVICE_PANEL_RIGHT,
> > +     DEVICE_PANEL_FRONT,
> > +     DEVICE_PANEL_BACK,
> > +     DEVICE_PANEL_UNKNOWN,
> > +};
> > +
> > +/**
> > + * enum device_location_vertical_position - Describes vertical position of the
> > + * device connection point on the panel surface.
> > + * @DEVICE_VERT_POS_UPPER: Device connection point is at upper part of panel.
> > + * @DEVICE_VERT_POS_CENTER: Device connection point is at center part of panel.
> > + * @DEVICE_VERT_POS_LOWER: Device connection point is at lower part of panel.
> > + */
> > +enum device_location_vertical_position {
> > +     DEVICE_VERT_POS_UPPER,
> > +     DEVICE_VERT_POS_CENTER,
> > +     DEVICE_VERT_POS_LOWER,
> > +};
> > +
> > +/**
> > + * enum device_location_horizontal_position - Describes horizontal position of
> > + * the device connection point on the panel surface.
> > + * @DEVICE_HORI_POS_LEFT: Device connection point is at left part of panel.
> > + * @DEVICE_HORI_POS_CENTER: Device connection point is at center part of panel.
> > + * @DEVICE_HORI_POS_RIGHT: Device connection point is at right part of panel.
> > + */
> > +enum device_location_horizontal_position {
> > +     DEVICE_HORI_POS_LEFT,
> > +     DEVICE_HORI_POS_CENTER,
> > +     DEVICE_HORI_POS_RIGHT,
> > +};
>
> Why do these enum values need to be in device.h?  Can they just live in
> drivers/base/ somewhere?
>

I was thinking that since these are information about device, they
could live in and be accessed through device.
Do you think this is not a good place for these enum and struct? Maybe
a new driver/base/location.h?

>
> > +
> > +/**
> > + * struct device_location - Device data related to physical location of the
> > + * device connection point.
> > + * @panel: Panel surface of the system's housing that the device connection
> > + *         point resides on.
> > + * @vertical_position: Vertical position of the device connection point within
> > + *                     the panel.
> > + * @horizontal_position: Horizontal position of the device connection point
> > + *                       within the panel.
> > + * @dock: Set if the device connection point resides in a docking station or
> > + *        port replicator.
> > + * @lid: Set if this device connection point resides on the lid of laptop
> > + *       system.
> > + */
> > +struct device_location {
> > +     enum device_location_panel panel;
> > +     enum device_location_vertical_position vertical_position;
> > +     enum device_location_horizontal_position horizontal_position;
> > +     bool dock;
> > +     bool lid;
>
> How badly did you just inflate all device structures in the kernel?  Did
> you use 'pahole' to see if you added padding or not?
>

I did not use pahole. I tried it and it is giving 16 bytes for struct
device_location and 2 bytes of padding.
Would using device location* instead be better since that would be 8
bytes of inflation?

> > +};
> > +
> >  /**
> >   * struct device - The basic device structure
> >   * @parent:  The device's "parent" device, the device to which it is attached.
> > @@ -456,6 +525,8 @@ struct dev_msi_info {
> >   * @removable:  Whether the device can be removed from the system. This
> >   *              should be set by the subsystem / bus driver that discovered
> >   *              the device.
> > + * @location:        Describes physical location of the device connection point in
> > + *           the system housing.
> >   *
> >   * @offline_disabled: If set, the device is permanently online.
> >   * @offline: Set after successful invocation of bus type's .offline().
> > @@ -569,6 +640,8 @@ struct device {
> >
> >       enum device_removable   removable;
> >
> > +     struct device_location  location;
>
> See, you just call it "location" here, not "physical_location", so why
> does userspace get a bigger name than the kernel does?  :)
>
> thanks,
>
> greg k-h


Thank you,
Won

Powered by blists - more mailing lists