[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2ed036b4-5a0a-f017-17e3-7922fcc2e8cc@pengutronix.de>
Date: Tue, 8 Mar 2022 10:58:19 +0100
From: Ahmad Fatoum <a.fatoum@...gutronix.de>
To: Gabriel FERNANDEZ <gabriel.fernandez@...s.st.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Philipp Zabel <p.zabel@...gutronix.de>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-stm32@...md-mailman.stormreply.com,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Etienne Carriere <etienne.carriere@...aro.org>
Subject: Re: [Linux-stm32] [PATCH v2 12/13] ARM: dts: stm32: enable optee
firmware and SCMI support on STM32MP13
Helo Gabriel,
On 03.03.22 14:09, Gabriel FERNANDEZ wrote:
>
> On 2/25/22 16:13, Ahmad Fatoum wrote:
>> Hello Gabriel,
>>
>> On 25.02.22 14:31, gabriel.fernandez@...s.st.com wrote:
>>> From: Gabriel Fernandez <gabriel.fernandez@...s.st.com>
>>> + firmware {
>>> + optee {
>>> + method = "smc";
>>> + compatible = "linaro,optee-tz";
>>> + };
>>> +
>>> + scmi: scmi {
>>> + compatible = "linaro,scmi-optee";
>> This compatible doesn't seem to be documented upstream. I am looking at v5.17-rc5.
>> Do you have a reference detailing the difference between this conduit and
>> plain arm,scmi-smc (as used with TF-A on the STM32MP151).
>>
>> Cheers,
>> Ahmad
>
> Hi
>
> Ahmad,
>
> it's on going.
>
> https://lore.kernel.org/linux-arm-kernel/20211029102118.GG6526@e120937-lin/T/#mf46c83f0aadce3061ee93fa22159405f38d881a0
I've found that thread in the meantime and got some clarification on why a new
transport for OP-TEE was added. One question I still have though is why make
this transport the default for STM32MP13x instead of using SCMI over SMC like
you do for STM32MP15x. OP-TEE could still be made to service SCMI over SMC
and it would allow people employing TF-A as SCMI provider an easier migration
to the newer SoC.
Cheers,
Ahmad
>
>>
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>> + linaro,optee-channel-id = <0>;
>>> + shmem = <&scmi_shm>;
>>> +
>>> + scmi_clk: protocol@14 {
>>> + reg = <0x14>;
>>> + #clock-cells = <1>;
>>> + };
>>> +
>>> + scmi_reset: protocol@16 {
>>> + reg = <0x16>;
>>> + #reset-cells = <1>;
>>> + };
>>> + };
>>> + };
>>> clocks {
>>> clk_axi: clk-axi {
>>> #clock-cells = <0>;
>>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists