[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220309190631.1576372-1-kieran.bingham+renesas@ideasonboard.com>
Date: Wed, 9 Mar 2022 19:06:31 +0000
From: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
To: linux-renesas-soc@...r.kernel.org,
Geert Uytterhoeven <geert@...der.be>
Cc: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@...onical.com>,
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH v2] arm64: dts: renesas: falcon-cpu: Use INTC_EX for SN65DSI86
The INTC block is a better choice for handling the interrupts on the V3U
as the INTC will always be powered, while the GPIO block may be
de-clocked if not in use. Further more, it may be likely to have a lower
power consumption as it does not need to drive the pins.
Switch the interrupt parent and interrupts definition from gpio1 to
irq0 on intc_ex, and configure the PFC accordingly.
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
---
v2:
- Define irq0_pins, and ensure pinctrl is set in the bridge node.
---
arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
index 6af3f4f4f268..53c4a26198e3 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi
@@ -192,14 +192,17 @@ &i2c1 {
clock-frequency = <400000>;
bridge@2c {
+ pinctrl-0 = <&irq0_pins>;
+ pinctrl-names = "default";
+
compatible = "ti,sn65dsi86";
reg = <0x2c>;
clocks = <&sn65dsi86_refclk>;
clock-names = "refclk";
- interrupt-parent = <&gpio1>;
- interrupts = <24 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-parent = <&intc_ex>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
vccio-supply = <®_1p8v>;
vpll-supply = <®_1p8v>;
@@ -271,6 +274,11 @@ i2c6_pins: i2c6 {
function = "i2c6";
};
+ irq0_pins: irq0 {
+ groups = "intc_ex_irq0";
+ function = "intc_ex";
+ };
+
keys_pins: keys {
pins = "GP_6_18", "GP_6_19", "GP_6_20";
bias-pull-up;
--
2.32.0
Powered by blists - more mailing lists