[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220309102118.8131-2-peng.fan@oss.nxp.com>
Date: Wed, 9 Mar 2022 18:21:13 +0800
From: "Peng Fan (OSS)" <peng.fan@....nxp.com>
To: bjorn.andersson@...aro.org, mathieu.poirier@...aro.org,
robh+dt@...nel.org, krzysztof.kozlowski@...onical.com
Cc: shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
festevam@...il.com, linux-imx@....com,
linux-remoteproc@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Peng Fan <peng.fan@....com>
Subject: [PATCH V2 1/6] dt-bindings: remoteproc: imx_rproc: support i.MX8QXP
From: Peng Fan <peng.fan@....com>
Add i.MX8QXP compatible
Add a new property rsrc-id(resource id) for SoC which supports
SCFW(System Controller Firmware). SCFW manages resources using resource
id, here the rsrc-id is used to check whether remote process is under
control of Linux or not.
To i.MX8QM/QXP, when M4 is in the same hardware partition with Cortex-A
cores, need power up M4 through SCFW, then M4 could start. So introduce
power-domains property.
Signed-off-by: Peng Fan <peng.fan@....com>
---
.../bindings/remoteproc/fsl,imx-rproc.yaml | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
index fc16d903353e..f25c203dd2f9 100644
--- a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -19,6 +19,7 @@ properties:
- fsl,imx8mm-cm4
- fsl,imx8mn-cm7
- fsl,imx8mp-cm7
+ - fsl,imx8qxp-cm4
- fsl,imx8ulp-cm33
- fsl,imx7d-cm4
- fsl,imx7ulp-cm4
@@ -27,6 +28,11 @@ properties:
clocks:
maxItems: 1
+ entry:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Specify cpu entry address for SCU enabled processor.
+
syscon:
$ref: /schemas/types.yaml#/definitions/phandle
description:
@@ -59,6 +65,15 @@ properties:
Indicate whether need to load the default firmware and start the remote
processor automatically.
+ power-domains:
+ maxItems: 8
+
+ rsrc-id:
+ description:
+ This property is to specify the resource id of the remote processor in SoC
+ which supports SCFW
+ maxItems: 1
+
required:
- compatible
--
2.30.0
Powered by blists - more mailing lists