| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <164682589927.16921.10086882193156342940.tip-bot2@tip-bot2>
Date: Wed, 09 Mar 2022 11:38:19 -0000
From: "irqchip-bot for Qianggui Song" <tip-bot2@...utronix.de>
To: linux-kernel@...r.kernel.org
Cc: Qianggui Song <qianggui.song@...ogic.com>,
Marc Zyngier <maz@...nel.org>, tglx@...utronix.de
Subject: [irqchip: irq/irqchip-next] irqchip/meson-gpio: Add support for meson s4 SoCs
The following commit has been merged into the irq/irqchip-next branch of irqchip:
Commit-ID: d6c47d21a0ef9a76c537f8c5258b49d61f2e160f
Gitweb: https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms/d6c47d21a0ef9a76c537f8c5258b49d61f2e160f
Author: Qianggui Song <qianggui.song@...ogic.com>
AuthorDate: Fri, 25 Feb 2022 13:52:06 +08:00
Committer: Marc Zyngier <maz@...nel.org>
CommitterDate: Wed, 09 Mar 2022 11:19:56
irqchip/meson-gpio: Add support for meson s4 SoCs
The meson s4 SoCs support 12 gpio irq lines compared with previous
serial chips and have something different, details are as below.
IRQ Number:
- 80:68 13 pins on bank Z
- 67:48 20 pins on bank X
- 47:36 12 pins on bank H
- 35:24 12 pins on bank D
- 23:22 2 pins on bank E
- 21:14 8 pins on bank C
- 13:0 13 pins on bank B
Signed-off-by: Qianggui Song <qianggui.song@...ogic.com>
[maz: fixed some W=1 build warnings]
Signed-off-by: Marc Zyngier <maz@...nel.org>
Link: https://lore.kernel.org/r/20220225055207.1048-5-qianggui.song@amlogic.com
---
drivers/irqchip/irq-meson-gpio.c | 65 +++++++++++++++++++++++++++++++-
1 file changed, 65 insertions(+)
diff --git a/drivers/irqchip/irq-meson-gpio.c b/drivers/irqchip/irq-meson-gpio.c
index 7b5863e..2aaa9aa 100644
--- a/drivers/irqchip/irq-meson-gpio.c
+++ b/drivers/irqchip/irq-meson-gpio.c
@@ -26,6 +26,8 @@
/* use for A1 like chips */
#define REG_PIN_A1_SEL 0x04
+/* Used for s4 chips */
+#define REG_EDGE_POL_S4 0x1c
/*
* Note: The S905X3 datasheet reports that BOTH_EDGE is controlled by
@@ -53,6 +55,8 @@ static void meson_a1_gpio_irq_sel_pin(struct meson_gpio_irq_controller *ctl,
static void meson_a1_gpio_irq_init(struct meson_gpio_irq_controller *ctl);
static int meson8_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
unsigned int type, u32 *channel_hwirq);
+static int meson_s4_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
+ unsigned int type, u32 *channel_hwirq);
struct irq_ctl_ops {
void (*gpio_irq_sel_pin)(struct meson_gpio_irq_controller *ctl,
@@ -101,6 +105,17 @@ struct meson_gpio_irq_params {
.pin_sel_mask = 0x7f, \
.nr_channels = 8, \
+#define INIT_MESON_S4_COMMON_DATA(irqs) \
+ INIT_MESON_COMMON(irqs, meson_a1_gpio_irq_init, \
+ meson_a1_gpio_irq_sel_pin, \
+ meson_s4_gpio_irq_set_type) \
+ .support_edge_both = true, \
+ .edge_both_offset = 0, \
+ .edge_single_offset = 12, \
+ .pol_low_offset = 0, \
+ .pin_sel_mask = 0xff, \
+ .nr_channels = 12, \
+
static const struct meson_gpio_irq_params meson8_params = {
INIT_MESON8_COMMON_DATA(134)
};
@@ -131,6 +146,10 @@ static const struct meson_gpio_irq_params a1_params = {
INIT_MESON_A1_COMMON_DATA(62)
};
+static const struct meson_gpio_irq_params s4_params = {
+ INIT_MESON_S4_COMMON_DATA(82)
+};
+
static const struct of_device_id meson_irq_gpio_matches[] = {
{ .compatible = "amlogic,meson8-gpio-intc", .data = &meson8_params },
{ .compatible = "amlogic,meson8b-gpio-intc", .data = &meson8b_params },
@@ -140,6 +159,7 @@ static const struct of_device_id meson_irq_gpio_matches[] = {
{ .compatible = "amlogic,meson-g12a-gpio-intc", .data = &axg_params },
{ .compatible = "amlogic,meson-sm1-gpio-intc", .data = &sm1_params },
{ .compatible = "amlogic,meson-a1-gpio-intc", .data = &a1_params },
+ { .compatible = "amlogic,meson-s4-gpio-intc", .data = &s4_params },
{ }
};
@@ -308,6 +328,51 @@ static int meson8_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
return 0;
}
+/*
+ * gpio irq relative registers for s4
+ * -PADCTRL_GPIO_IRQ_CTRL0
+ * bit[31]: enable/disable all the irq lines
+ * bit[12-23]: single edge trigger
+ * bit[0-11]: polarity trigger
+ *
+ * -PADCTRL_GPIO_IRQ_CTRL[X]
+ * bit[0-16]: 7 bits to choose gpio source for irq line 2*[X] - 2
+ * bit[16-22]:7 bits to choose gpio source for irq line 2*[X] - 1
+ * where X = 1-6
+ *
+ * -PADCTRL_GPIO_IRQ_CTRL[7]
+ * bit[0-11]: both edge trigger
+ */
+static int meson_s4_gpio_irq_set_type(struct meson_gpio_irq_controller *ctl,
+ unsigned int type, u32 *channel_hwirq)
+{
+ u32 val = 0;
+ unsigned int idx;
+
+ idx = meson_gpio_irq_get_channel_idx(ctl, channel_hwirq);
+
+ type &= IRQ_TYPE_SENSE_MASK;
+
+ meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4, BIT(idx), 0);
+
+ if (type == IRQ_TYPE_EDGE_BOTH) {
+ val |= BIT(ctl->params->edge_both_offset + idx);
+ meson_gpio_irq_update_bits(ctl, REG_EDGE_POL_S4,
+ BIT(ctl->params->edge_both_offset + idx), val);
+ return 0;
+ }
+
+ if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_EDGE_FALLING))
+ val |= BIT(ctl->params->pol_low_offset + idx);
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ val |= BIT(ctl->params->edge_single_offset + idx);
+
+ meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
+ BIT(idx) | BIT(12 + idx), val);
+ return 0;
+};
+
static unsigned int meson_gpio_irq_type_output(unsigned int type)
{
unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
Powered by blists - more mailing lists