| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1646926823-5362-1-git-send-email-quic_c_sbhanu@quicinc.com>
Date: Thu, 10 Mar 2022 21:10:23 +0530
From: Shaik Sajida Bhanu <quic_c_sbhanu@...cinc.com>
To: adrian.hunter@...el.com, agross@...nel.org,
bjorn.andersson@...aro.org, ulf.hansson@...aro.org,
p.zabel@...gutronix.de, chris@...ntf.net, gdjakov@...sol.com
Cc: linux-mmc@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org, quic_asutoshd@...cinc.com,
quic_rampraka@...cinc.com, quic_pragalla@...cinc.com,
quic_sartgarg@...cinc.com, quic_nitirawa@...cinc.com,
quic_sayalil@...cinc.com,
Shaik Sajida Bhanu <quic_c_sbhanu@...cinc.com>
Subject: [PATCH V2] mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC
Reset GCC_SDCC_BCR register before every fresh initilazation. This will
reset whole SDHC-msm controller, clears the previous power control
states and avoids, software reset timeout issues as below.
[ 5.458061][ T262] mmc1: Reset 0x1 never completed.
[ 5.462454][ T262] mmc1: sdhci: ============ SDHCI REGISTER DUMP
===========
[ 5.469065][ T262] mmc1: sdhci: Sys addr: 0x00000000 | Version:
0x00007202
[ 5.475688][ T262] mmc1: sdhci: Blk size: 0x00000000 | Blk cnt:
0x00000000
[ 5.482315][ T262] mmc1: sdhci: Argument: 0x00000000 | Trn mode:
0x00000000
[ 5.488927][ T262] mmc1: sdhci: Present: 0x01f800f0 | Host ctl:
0x00000000
[ 5.495539][ T262] mmc1: sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 5.502162][ T262] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x00000003
[ 5.508768][ T262] mmc1: sdhci: Timeout: 0x00000000 | Int stat:
0x00000000
[ 5.515381][ T262] mmc1: sdhci: Int enab: 0x00000000 | Sig enab:
0x00000000
[ 5.521996][ T262] mmc1: sdhci: ACmd stat: 0x00000000 | Slot int:
0x00000000
[ 5.528607][ T262] mmc1: sdhci: Caps: 0x362dc8b2 | Caps_1: 0x0000808f
[ 5.535227][ T262] mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x00000000
[ 5.541841][ T262] mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]:
0x00000000
[ 5.548454][ T262] mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]:
0x00000000
[ 5.555079][ T262] mmc1: sdhci: Host ctl2: 0x00000000
[ 5.559651][ T262] mmc1: sdhci_msm: ----------- VENDOR REGISTER
DUMP-----------
[ 5.566621][ T262] mmc1: sdhci_msm: DLL sts: 0x00000000 | DLL cfg:
0x6000642c |
DLL cfg2: 0x0020a000
[ 5.575465][ T262] mmc1: sdhci_msm: DLL cfg3: 0x00000000 | DLL usr ctl:
0x00010800 | DDR cfg: 0x80040873
[ 5.584658][ T262] mmc1: sdhci_msm: Vndr func: 0x00018a9c | Vndr func2 :
0xf88218a8 Vndr func3: 0x02626040
Fixes: 0eb0d9f4de34 ("mmc: sdhci-msm: Initial support for Qualcomm
chipsets")
Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@...cinc.com>
---
Changes since V1:
- Added fixes tag as suggested by Ulf Hansson.
- Replaced devm_reset_control_get() with
devm_reset_control_get_optional_exclusive() as suggested by
Ulf Hansson.
---
drivers/mmc/host/sdhci-msm.c | 48 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 48 insertions(+)
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 50c71e0..cb33c9a 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -17,6 +17,7 @@
#include <linux/regulator/consumer.h>
#include <linux/interconnect.h>
#include <linux/pinctrl/consumer.h>
+#include <linux/reset.h>
#include "sdhci-pltfm.h"
#include "cqhci.h"
@@ -284,6 +285,7 @@ struct sdhci_msm_host {
bool uses_tassadar_dll;
u32 dll_config;
u32 ddr_config;
+ struct reset_control *core_reset;
bool vqmmc_enabled;
};
@@ -2482,6 +2484,45 @@ static inline void sdhci_msm_get_of_property(struct platform_device *pdev,
of_property_read_u32(node, "qcom,dll-config", &msm_host->dll_config);
}
+static int sdhci_msm_gcc_reset(struct platform_device *pdev,
+ struct sdhci_host *host)
+{
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ int ret = 0;
+
+ msm_host->core_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "core_reset");
+ if (IS_ERR(msm_host->core_reset)) {
+ ret = PTR_ERR(msm_host->core_reset);
+ dev_err(&pdev->dev, "core_reset unavailable (%d)\n", ret);
+ msm_host->core_reset = NULL;
+ }
+ if (msm_host->core_reset) {
+ ret = reset_control_assert(msm_host->core_reset);
+ if (ret) {
+ dev_err(&pdev->dev, "core_reset assert failed (%d)\n",
+ ret);
+ goto out;
+ }
+ /*
+ * The hardware requirement for delay between assert/deassert
+ * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to
+ * ~125us (4/32768). To be on the safe side add 200us delay.
+ */
+ usleep_range(200, 210);
+
+ ret = reset_control_deassert(msm_host->core_reset);
+ if (ret) {
+ dev_err(&pdev->dev, "core_reset deassert failed (%d)\n",
+ ret);
+ goto out;
+ }
+ usleep_range(200, 210);
+ }
+
+out:
+ return ret;
+}
static int sdhci_msm_probe(struct platform_device *pdev)
{
@@ -2529,6 +2570,13 @@ static int sdhci_msm_probe(struct platform_device *pdev)
msm_host->saved_tuning_phase = INVALID_TUNING_PHASE;
+ ret = sdhci_msm_gcc_reset(pdev, host);
+ if (ret) {
+ dev_err(&pdev->dev, "core_reset assert/deassert failed (%d)\n",
+ ret);
+ goto pltfm_free;
+ }
+
/* Setup SDCC bus voter clock. */
msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus");
if (!IS_ERR(msm_host->bus_clk)) {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
Powered by blists - more mailing lists