linux-kernel - Re: [PATCH V2] arm64: dts: qcom: sc7280: Enable gcc HW reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <YirIPRvcSSYhxiNv@ripper>
Date:   Thu, 10 Mar 2022 19:55:41 -0800
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     Shaik Sajida Bhanu <quic_c_sbhanu@...cinc.com>
Cc:     krzk+dt@...nel.org, agross@...nel.org, robh+dt@...nel.org,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, quic_asutoshd@...cinc.com,
        quic_rampraka@...cinc.com, quic_pragalla@...cinc.com,
        quic_sartgarg@...cinc.com, quic_nitirawa@...cinc.com,
        quic_sayalil@...cinc.com
Subject: Re: [PATCH V2] arm64: dts: qcom: sc7280: Enable gcc HW reset

On Thu 10 Mar 06:45 PST 2022, Shaik Sajida Bhanu wrote:

Without looking at what Krzysztof suggested, I think $subject should
reflect the fact that it's the reset of the two SDCC controllers that
you're adding.

Something like "arm64: dts:qcom: Add resets for SDCC controllers" would allow me to grasp the full
purpose of the patch by only reading the subject.

> Enable gcc HW reset for eMMC and SD card.
> 
> Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@...cinc.com>
> ---
> 
> Changes since V1:
> 	- Updated commit message, subject and comments in dtsi file as
> 	  suggested by Krzysztof Kozlowski.
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index c07765d..721abf5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -881,6 +881,9 @@
>  			mmc-hs400-1_8v;
>  			mmc-hs400-enhanced-strobe;
>  
> +			/* Add gcc hw reset dt entry for eMMC */

When you read this comment 2 weeks from now it won't add any value.

> +			resets = <&gcc GCC_SDCC1_BCR>;
> +			reset-names = "core_reset";

Doesn't seem that this binding has been converted to YAML, but the .txt
binding doesn't mention "resets" and I don't see a reason for having a
reset-names for a single reset.

And please keep the empty line before the opp-table.

Regards,
Bjorn

>  			sdhc1_opp_table: opp-table {
>  				compatible = "operating-points-v2";
>  
> @@ -2686,6 +2689,9 @@
>  
>  			qcom,dll-config = <0x0007642c>;
>  
> +			/* Add gcc hw reset dt entry for SD card */
> +			resets = <&gcc GCC_SDCC2_BCR>;
> +			reset-names = "core_reset";
>  			sdhc2_opp_table: opp-table {
>  				compatible = "operating-points-v2";
>  
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
> of Code Aurora Forum, hosted by The Linux Foundation
>