lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20220311133527.5914-2-jianjun.wang@mediatek.com>
Date:   Fri, 11 Mar 2022 21:35:26 +0800
From:   Jianjun Wang <jianjun.wang@...iatek.com>
To:     Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Kishon Vijay Abraham I <kishon@...com>,
        Vinod Koul <vkoul@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Matthias Brugger <matthias.bgg@...il.com>
CC:     Jianjun Wang <jianjun.wang@...iatek.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-mediatek@...ts.infradead.org>,
        <linux-phy@...ts.infradead.org>, <devicetree@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, <rex-bc.chen@...iatek.com>,
        <randy.wu@...iatek.com>, <jieyy.yang@...iatek.com>,
        <chuanjia.liu@...iatek.com>, <qizhong.cheng@...iatek.com>,
        <jian.yang@...iatek.com>
Subject: [PATCH 1/2] phy: mediatek: Add PCIe PHY driver

Add PCIe GEN3 PHY driver support on MediaTek chipsets.

Signed-off-by: Jianjun Wang <jianjun.wang@...iatek.com>
---
 drivers/phy/mediatek/Kconfig        |  11 ++
 drivers/phy/mediatek/Makefile       |   1 +
 drivers/phy/mediatek/phy-mtk-pcie.c | 198 ++++++++++++++++++++++++++++
 3 files changed, 210 insertions(+)
 create mode 100644 drivers/phy/mediatek/phy-mtk-pcie.c

diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 55f8e6c048ab..387ed1b3f2cc 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -55,3 +55,14 @@ config PHY_MTK_MIPI_DSI
 	select GENERIC_PHY
 	help
 	  Support MIPI DSI for Mediatek SoCs.
+
+config PHY_MTK_PCIE
+	tristate "MediaTek PCIe-PHY Driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	depends on OF
+	select GENERIC_PHY
+	help
+	  Say 'Y' here to add support for MediaTek PCIe PHY driver.
+	  This driver create the basic PHY instance and provides initialize
+	  callback for PCIe GEN3 port, it supports software efuse
+	  initialization.
diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
index ace660fbed3a..788c13147f63 100644
--- a/drivers/phy/mediatek/Makefile
+++ b/drivers/phy/mediatek/Makefile
@@ -6,6 +6,7 @@
 obj-$(CONFIG_PHY_MTK_TPHY)		+= phy-mtk-tphy.o
 obj-$(CONFIG_PHY_MTK_UFS)		+= phy-mtk-ufs.o
 obj-$(CONFIG_PHY_MTK_XSPHY)		+= phy-mtk-xsphy.o
+obj-$(CONFIG_PHY_MTK_PCIE)		+= phy-mtk-pcie.o
 
 phy-mtk-hdmi-drv-y			:= phy-mtk-hdmi.o
 phy-mtk-hdmi-drv-y			+= phy-mtk-hdmi-mt2701.o
diff --git a/drivers/phy/mediatek/phy-mtk-pcie.c b/drivers/phy/mediatek/phy-mtk-pcie.c
new file mode 100644
index 000000000000..45a67d9171f6
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-pcie.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2022 MediaTek Inc.
+ * Author: Jianjun Wang <jianjun.wang@...iatek.com>
+ */
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#include "phy-mtk-io.h"
+
+#define PEXTP_ANA_GLB_00_REG		0x9000
+#define PEXTP_ANA_LN0_TX_REG		0xA004
+#define PEXTP_ANA_LN0_RX_REG		0xA03C
+#define PEXTP_ANA_LN1_TX_REG		0xA104
+#define PEXTP_ANA_LN1_RX_REG		0xA13c
+
+/* PEXTP_GLB_00_RG[28:24] Internal Resistor Selection of TX Bias Current */
+#define EFUSE_GLB_INTR_SEL		GENMASK(28, 24)
+#define EFUSE_GLB_INTR_VAL(x)		((0x1f & (x)) << 24)
+
+/* PEXTP_ANA_LN_RX_RG[3:0] LN0 RX impedance selection */
+#define EFUSE_LN_RX_SEL			GENMASK(3, 0)
+#define EFUSE_LN_RX_VAL(x)		(0xf & (x))
+
+/* PEXTP_ANA_LN_TX_RG[5:2] LN0 TX PMOS impedance selection */
+#define EFUSE_LN_TX_PMOS_SEL		GENMASK(5, 2)
+#define EFUSE_LN_TX_PMOS_VAL(x)		((0xf & (x)) << 2)
+
+/* PEXTP_ANA_LN_TX_RG[11:8] LN0 TX NMOS impedance selection */
+#define EFUSE_LN_TX_NMOS_SEL		GENMASK(11, 8)
+#define EFUSE_LN_TX_NMOS_VAL(x)		((0xf & (x)) << 8)
+
+struct mtk_pcie_phy {
+	struct device *dev;
+	struct phy *phy;
+	void __iomem *sif_base;
+};
+
+static int mtk_pcie_phy_init(struct phy *phy)
+{
+	struct mtk_pcie_phy *pcie_phy = phy_get_drvdata(phy);
+	struct device *dev = pcie_phy->dev;
+	bool nvmem_enabled;
+	u32 glb_intr, tx_pmos, tx_nmos, rx_data;
+	int ret;
+
+	nvmem_enabled = device_property_read_bool(dev, "nvmem-cells");
+	if (!nvmem_enabled)
+		return 0;
+
+	/* Set efuse value for lane0 */
+	ret = nvmem_cell_read_variable_le_u32(dev, "tx_ln0_pmos", &tx_pmos);
+	if (ret) {
+		dev_err(dev, "%s: Failed to read tx_ln0_pmos\n", __func__);
+		return ret;
+	}
+
+	ret = nvmem_cell_read_variable_le_u32(dev, "tx_ln0_nmos", &tx_nmos);
+	if (ret) {
+		dev_err(dev, "%s: Failed to read tx_ln0_nmos\n", __func__);
+		return ret;
+	}
+
+	ret = nvmem_cell_read_variable_le_u32(dev, "rx_ln0", &rx_data);
+	if (ret) {
+		dev_err(dev, "%s: Failed to read rx_ln0\n", __func__);
+		return ret;
+	}
+
+	/* Don't wipe the old data if there is no data in efuse cell */
+	if (!(tx_pmos || tx_nmos || rx_data)) {
+		dev_warn(dev, "%s: No efuse data found, but dts enable it\n",
+			 __func__);
+		return 0;
+	}
+
+	mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN0_TX_REG,
+			    EFUSE_LN_TX_PMOS_SEL,
+			    EFUSE_LN_TX_PMOS_VAL(tx_pmos));
+
+	mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN0_TX_REG,
+			    EFUSE_LN_TX_NMOS_SEL,
+			    EFUSE_LN_TX_NMOS_VAL(tx_nmos));
+
+	mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN0_RX_REG,
+			    EFUSE_LN_RX_SEL, EFUSE_LN_RX_VAL(rx_data));
+
+	/* Set global data */
+	ret = nvmem_cell_read_variable_le_u32(dev, "glb_intr", &glb_intr);
+	if (ret) {
+		dev_err(dev, "%s: Failed to read glb_intr\n", __func__);
+		return ret;
+	}
+
+	mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_GLB_00_REG,
+			    EFUSE_GLB_INTR_SEL, EFUSE_GLB_INTR_VAL(glb_intr));
+
+	/*
+	 * Set efuse value for lane1, only available for the platform which
+	 * supports two lane.
+	 */
+	ret = nvmem_cell_read_variable_le_u32(dev, "tx_ln1_pmos", &tx_pmos);
+	if (ret) {
+		dev_err(dev, "%s: Failed to read tx_ln1_pmos, efuse value not support for lane 1\n",
+			__func__);
+		return 0;
+	}
+
+	ret = nvmem_cell_read_variable_le_u32(dev, "tx_ln1_nmos", &tx_nmos);
+	if (ret) {
+		dev_err(dev, "%s: Failed to read tx_ln1_pmos\n", __func__);
+		return ret;
+	}
+
+	ret = nvmem_cell_read_variable_le_u32(dev, "rx_ln1", &rx_data);
+	if (ret) {
+		dev_err(dev, "%s: Failed to read rx_ln1\n", __func__);
+		return ret;
+	}
+
+	if (!(tx_pmos || tx_nmos || rx_data))
+		return 0;
+
+	mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN1_TX_REG,
+			    EFUSE_LN_TX_PMOS_SEL,
+			    EFUSE_LN_TX_PMOS_VAL(tx_pmos));
+
+	mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN1_TX_REG,
+			    EFUSE_LN_TX_NMOS_SEL,
+			    EFUSE_LN_TX_NMOS_VAL(tx_nmos));
+
+	mtk_phy_update_bits(pcie_phy->sif_base + PEXTP_ANA_LN1_RX_REG,
+			    EFUSE_LN_RX_SEL, EFUSE_LN_RX_VAL(rx_data));
+
+	return 0;
+}
+
+static const struct phy_ops mtk_pcie_phy_ops = {
+	.init	= mtk_pcie_phy_init,
+	.owner	= THIS_MODULE,
+};
+
+static int mtk_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct phy_provider *provider;
+	struct mtk_pcie_phy *pcie_phy;
+
+	pcie_phy = devm_kzalloc(dev, sizeof(*pcie_phy), GFP_KERNEL);
+	if (!pcie_phy)
+		return -ENOMEM;
+
+	pcie_phy->dev = dev;
+
+	pcie_phy->sif_base = devm_platform_ioremap_resource_byname(pdev, "sif");
+	if (IS_ERR(pcie_phy->sif_base)) {
+		dev_err(dev, "%s: Failed to map phy-sif base\n", __func__);
+		return PTR_ERR(pcie_phy->sif_base);
+	}
+
+	pcie_phy->phy = devm_phy_create(dev, dev->of_node, &mtk_pcie_phy_ops);
+	if (IS_ERR(pcie_phy->phy)) {
+		dev_err(dev, "%s: Failed to create PCIe phy\n", __func__);
+		return PTR_ERR(pcie_phy->phy);
+	}
+
+	phy_set_drvdata(pcie_phy->phy, pcie_phy);
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id mtk_pcie_phy_of_match[] = {
+	{ .compatible = "mediatek,pcie-phy" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mtk_pcie_phy_of_match);
+
+static struct platform_driver mtk_pcie_phy_driver = {
+	.probe	= mtk_pcie_phy_probe,
+	.driver	= {
+		.name = "mtk-pcie-phy",
+		.of_match_table = mtk_pcie_phy_of_match,
+	},
+};
+module_platform_driver(mtk_pcie_phy_driver);
+
+MODULE_DESCRIPTION("MediaTek PCIe PHY driver");
+MODULE_AUTHOR("Jianjun Wang <jianjun.wang@...iatek.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.18.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ