[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87mthxb514.fsf@yhuang6-desk2.ccr.corp.intel.com>
Date: Fri, 11 Mar 2022 10:24:07 +0800
From: "Huang, Ying" <ying.huang@...el.com>
To: Oscar Salvador <osalvador@...e.de>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Dave Hansen <dave.hansen@...ux.intel.com>,
Abhishek Goel <huntbag@...ux.vnet.ibm.com>,
Baolin Wang <baolin.wang@...ux.alibaba.com>,
linux-mm@...ck.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] mm: Only re-generate demotion targets when a numa
node changes its N_CPU state
Oscar Salvador <osalvador@...e.de> writes:
> Abhishek reported that after patch [1], hotplug operations are
> taking ~double the expected time. [2]
>
> The reason behind is that the CPU callbacks that migrate_on_reclaim_init()
> sets always call set_migration_target_nodes() whenever a CPU is brought
> up/down.
> But we only care about numa nodes going from having cpus to become
> cpuless, and vice versa, as that influences the demotion_target order.
>
> We do already have two CPU callbacks (vmstat_cpu_online() and vmstat_cpu_dead())
> that check exactly that, so get rid of the CPU callbacks in
> migrate_on_reclaim_init() and only call set_migration_target_nodes() from
> vmstat_cpu_{dead,online}() whenever a numa node change its N_CPU state.
>
> [1] https://lore.kernel.org/linux-mm/20210721063926.3024591-2-ying.huang@intel.com/
> [2] https://lore.kernel.org/linux-mm/eb438ddd-2919-73d4-bd9f-b7eecdd9577a@linux.vnet.ibm.com/
>
> Reported-by: Abhishek Goel <huntbag@...ux.vnet.ibm.com>
> Signed-off-by: Oscar Salvador <osalvador@...e.de>
> ---
> v1 -> v2: - Fix prototype function declaration
> - Fix build error on RISC
> - Adressed feedback from Baolin and Huang
> ---
> include/linux/migrate.h | 8 ++++++++
> mm/migrate.c | 41 +++++------------------------------------
> mm/vmstat.c | 13 ++++++++++++-
> 3 files changed, 25 insertions(+), 37 deletions(-)
>
> diff --git a/include/linux/migrate.h b/include/linux/migrate.h
> index db96e10eb8da..90e75d5a54d6 100644
> --- a/include/linux/migrate.h
> +++ b/include/linux/migrate.h
> @@ -48,7 +48,15 @@ int folio_migrate_mapping(struct address_space *mapping,
> struct folio *newfolio, struct folio *folio, int extra_count);
>
> extern bool numa_demotion_enabled;
> +extern void migrate_on_reclaim_init(void);
> +#ifdef CONFIG_HOTPLUG_CPU
> +extern void set_migration_target_nodes(void);
> #else
> +static inline void set_migration_target_nodes(void) {}
> +#endif
> +#else
> +
> +static inline void set_migration_target_nodes(void) {}
>
> static inline void putback_movable_pages(struct list_head *l) {}
> static inline int migrate_pages(struct list_head *l, new_page_t new,
> diff --git a/mm/migrate.c b/mm/migrate.c
> index c7da064b4781..f9d5b6092a42 100644
> --- a/mm/migrate.c
> +++ b/mm/migrate.c
> @@ -3190,7 +3190,7 @@ static void __set_migration_target_nodes(void)
> /*
> * For callers that do not hold get_online_mems() already.
> */
> -static void set_migration_target_nodes(void)
> +void set_migration_target_nodes(void)
> {
> get_online_mems();
> __set_migration_target_nodes();
> @@ -3254,51 +3254,20 @@ static int __meminit migrate_on_reclaim_callback(struct notifier_block *self,
> return notifier_from_errno(0);
> }
>
> -/*
> - * React to hotplug events that might affect the migration targets
> - * like events that online or offline NUMA nodes.
> - *
> - * The ordering is also currently dependent on which nodes have
> - * CPUs. That means we need CPU on/offline notification too.
> - */
> -static int migration_online_cpu(unsigned int cpu)
> +void __init migrate_on_reclaim_init(void)
> {
> - set_migration_target_nodes();
> - return 0;
> -}
> -
> -static int migration_offline_cpu(unsigned int cpu)
> -{
> - set_migration_target_nodes();
> - return 0;
> -}
> -
> -static int __init migrate_on_reclaim_init(void)
> -{
> - int ret;
> -
> node_demotion = kmalloc_array(nr_node_ids,
> sizeof(struct demotion_nodes),
> GFP_KERNEL);
> WARN_ON(!node_demotion);
>
> - ret = cpuhp_setup_state_nocalls(CPUHP_MM_DEMOTION_DEAD, "mm/demotion:offline",
> - NULL, migration_offline_cpu);
> /*
> - * In the unlikely case that this fails, the automatic
> - * migration targets may become suboptimal for nodes
> - * where N_CPU changes. With such a small impact in a
> - * rare case, do not bother trying to do anything special.
> + * At this point, all numa nodes with memory/CPus have their state
> + * properly set, so we can build the demotion order now.
> */
> - WARN_ON(ret < 0);
> - ret = cpuhp_setup_state(CPUHP_AP_MM_DEMOTION_ONLINE, "mm/demotion:online",
> - migration_online_cpu, NULL);
> - WARN_ON(ret < 0);
> -
> + set_migration_target_nodes();
> hotplug_memory_notifier(migrate_on_reclaim_callback, 100);
> - return 0;
> }
> -late_initcall(migrate_on_reclaim_init);
> #endif /* CONFIG_HOTPLUG_CPU */
>
> bool numa_demotion_enabled = false;
> diff --git a/mm/vmstat.c b/mm/vmstat.c
> index 4057372745d0..9e9536df51b5 100644
> --- a/mm/vmstat.c
> +++ b/mm/vmstat.c
> @@ -28,6 +28,7 @@
> #include <linux/mm_inline.h>
> #include <linux/page_ext.h>
> #include <linux/page_owner.h>
> +#include <linux/migrate.h>
>
> #include "internal.h"
>
> @@ -2043,7 +2044,12 @@ static void __init init_cpu_node_state(void)
> static int vmstat_cpu_online(unsigned int cpu)
> {
> refresh_zone_stat_thresholds();
> - node_set_state(cpu_to_node(cpu), N_CPU);
> +
> + if (!node_state(cpu_to_node(cpu), N_CPU)) {
> + node_set_state(cpu_to_node(cpu), N_CPU);
> + set_migration_target_nodes();
> + }
> +
> return 0;
> }
>
> @@ -2066,6 +2072,8 @@ static int vmstat_cpu_dead(unsigned int cpu)
> return 0;
>
> node_clear_state(node, N_CPU);
> + set_migration_target_nodes();
> +
> return 0;
> }
>
> @@ -2097,6 +2105,9 @@ void __init init_mm_internals(void)
>
> start_shepherd_timer();
> #endif
> +#if defined(CONFIG_MIGRATION) && defined(CONFIG_HOTPLUG_CPU)
> + migrate_on_reclaim_init();
> +#endif
It may be unnecessary to be fixed in this patch. But I think we need to
cleanup the kernel config dependencies of the demotion code at some time.
1. Even if !defined(CONFIG_HOTPLUG_CPU) &&
!defined(CONFIG_MEMORY_HOTPLUG), we still need to allocate
"node_demotion" and call set_migration_target_nodes() during boot time.
2. If !defined(CONFIG_MEMORY_HOTPLUG), we don't need
migrate_on_reclaim_callback().
3. We need defined(CONFIG_NUMA) && defined(CONFIG_MIGRATION) for all
these code.
Best Regards,
Huang, Ying
> #ifdef CONFIG_PROC_FS
> proc_create_seq("buddyinfo", 0444, NULL, &fragmentation_op);
> proc_create_seq("pagetypeinfo", 0400, NULL, &pagetypeinfo_op);
Powered by blists - more mailing lists