linux-kernel - [PATCH 3/3] docs: bootconfig: Add how to embed the bootconfig into kernel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <164717979739.656425.17945326639021989871.stgit@devnote2>
Date:   Sun, 13 Mar 2022 22:56:37 +0900
From:   Masami Hiramatsu <mhiramat@...nel.org>
To:     Steven Rostedt <rostedt@...dmis.org>
Cc:     Masami Hiramatsu <mhiramat@...nel.org>,
        Padmanabha Srinivasaiah <treasure4paddy@...il.com>,
        LKML <linux-kernel@...r.kernel.org>,
        Jonathan Corbet <corbet@....net>, linux-doc@...r.kernel.org
Subject: [PATCH 3/3] docs: bootconfig: Add how to embed the bootconfig into kernel

Add a description how to embed the bootconfig file into kernel.

Signed-off-by: Masami Hiramatsu <mhiramat@...nel.org>
---
 Documentation/admin-guide/bootconfig.rst |   31 +++++++++++++++++++++++++++---
 1 file changed, 28 insertions(+), 3 deletions(-)

diff --git a/Documentation/admin-guide/bootconfig.rst b/Documentation/admin-guide/bootconfig.rst
index a1860fc0ca88..a172c669997a 100644
--- a/Documentation/admin-guide/bootconfig.rst
+++ b/Documentation/admin-guide/bootconfig.rst
@@ -158,9 +158,15 @@ Each key-value pair is shown in each line with following style::
 Boot Kernel With a Boot Config
 ==============================
 
-Since the boot configuration file is loaded with initrd, it will be added
-to the end of the initrd (initramfs) image file with padding, size,
-checksum and 12-byte magic word as below.
+There are 2 options to boot the kernel with bootconfig, one is attaching
+bootconfig to initrd image, and embedding the kernel itself.
+
+Attaching a Boot Config to Initrd
+---------------------------------
+
+Since the boot configuration file is loaded with initrd by default,
+it will be added to the end of the initrd (initramfs) image file with
+padding, size, checksum and 12-byte magic word as below.
 
 [initrd][bootconfig][padding][size(le32)][checksum(le32)][#BOOTCONFIG\n]
 
@@ -196,6 +202,25 @@ To remove the config from the image, you can use -d option as below::
 Then add "bootconfig" on the normal kernel command line to tell the
 kernel to look for the bootconfig at the end of the initrd file.
 
+Embedding a Boot Config into Kernel
+-----------------------------------
+
+If you can not use initrd, you can also embed the bootconfig file to the
+kernel by Kconfig options. In This case, you need to recompile the kernel
+with the following configs::
+
+ COFNIG_EMBED_BOOT_CONFIG=y
+ CONFIG_EMBED_BOOT_CONFIG_FILE="/PATH/TO/BOOTCONFIG/FILE"
+
+You need to set the correct path (relative path from kernel build directory
+or absolute path) to the ``CONFIG_EMBED_BOOT_CONFIG_FILE`` option.
+Then the kernel will embed the bootconfig file as a default bootconfig.
+
+As same as attaching to initrd, you need ``bootconfig`` option to the
+kernel command line to enable the embedded bootconfig.
+
+Note that even if you set this option, you can override the embedded
+bootconfig by another bootconfig which attached to the initrd.
 
 Kernel parameters via Boot Config
 =================================