| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <8735jkn1yt.fsf@waldekranz.com>
Date: Mon, 14 Mar 2022 13:38:34 +0100
From: Tobias Waldekranz <tobias@...dekranz.com>
To: Nikolay Aleksandrov <razor@...ckwall.org>, davem@...emloft.net,
kuba@...nel.org
Cc: Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
Jiri Pirko <jiri@...nulli.us>,
Ivan Vecera <ivecera@...hat.com>,
Roopa Prabhu <roopa@...dia.com>,
Russell King <linux@...linux.org.uk>,
Ido Schimmel <idosch@...dia.com>,
Petr Machata <petrm@...dia.com>,
Cooper Lees <me@...perlees.com>,
Matt Johnston <matt@...econstruct.com.au>,
linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
bridge@...ts.linux-foundation.org
Subject: Re: [PATCH v3 net-next 03/14] net: bridge: mst: Support setting and
reporting MST port states
On Mon, Mar 14, 2022 at 12:37, Nikolay Aleksandrov <razor@...ckwall.org> wrote:
> On 14/03/2022 11:52, Tobias Waldekranz wrote:
>> Make it possible to change the port state in a given MSTI by extending
>> the bridge port netlink interface (RTM_SETLINK on PF_BRIDGE).The
>> proposed iproute2 interface would be:
>>
>> bridge mst set dev <PORT> msti <MSTI> state <STATE>
>>
>> Current states in all applicable MSTIs can also be dumped via a
>> corresponding RTM_GETLINK. The proposed iproute interface looks like
>> this:
>>
>> $ bridge mst
>> port msti
>> vb1 0
>> state forwarding
>> 100
>> state disabled
>> vb2 0
>> state forwarding
>> 100
>> state forwarding
>>
>> The preexisting per-VLAN states are still valid in the MST
>> mode (although they are read-only), and can be queried as usual if one
>> is interested in knowing a particular VLAN's state without having to
>> care about the VID to MSTI mapping (in this example VLAN 20 and 30 are
>> bound to MSTI 100):
>>
>> $ bridge -d vlan
>> port vlan-id
>> vb1 10
>> state forwarding mcast_router 1
>> 20
>> state disabled mcast_router 1
>> 30
>> state disabled mcast_router 1
>> 40
>> state forwarding mcast_router 1
>> vb2 10
>> state forwarding mcast_router 1
>> 20
>> state forwarding mcast_router 1
>> 30
>> state forwarding mcast_router 1
>> 40
>> state forwarding mcast_router 1
>>
>> Signed-off-by: Tobias Waldekranz <tobias@...dekranz.com>
>> ---
>
> Hi Tobias,
> A few comments below..
>
>> include/uapi/linux/if_bridge.h | 17 ++++++
>> include/uapi/linux/rtnetlink.h | 1 +
>> net/bridge/br_mst.c | 105 +++++++++++++++++++++++++++++++++
>> net/bridge/br_netlink.c | 32 +++++++++-
>> net/bridge/br_private.h | 15 +++++
>> 5 files changed, 169 insertions(+), 1 deletion(-)
>>
>> diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h
>> index f60244b747ae..879dfaef8da0 100644
>> --- a/include/uapi/linux/if_bridge.h
>> +++ b/include/uapi/linux/if_bridge.h
>> @@ -122,6 +122,7 @@ enum {
>> IFLA_BRIDGE_VLAN_TUNNEL_INFO,
>> IFLA_BRIDGE_MRP,
>> IFLA_BRIDGE_CFM,
>> + IFLA_BRIDGE_MST,
>> __IFLA_BRIDGE_MAX,
>> };
>> #define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1)
>> @@ -453,6 +454,21 @@ enum {
>>
>> #define IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX (__IFLA_BRIDGE_CFM_CC_PEER_STATUS_MAX - 1)
>>
>> +enum {
>> + IFLA_BRIDGE_MST_UNSPEC,
>> + IFLA_BRIDGE_MST_ENTRY,
>> + __IFLA_BRIDGE_MST_MAX,
>> +};
>> +#define IFLA_BRIDGE_MST_MAX (__IFLA_BRIDGE_MST_MAX - 1)
>> +
>> +enum {
>> + IFLA_BRIDGE_MST_ENTRY_UNSPEC,
>> + IFLA_BRIDGE_MST_ENTRY_MSTI,
>> + IFLA_BRIDGE_MST_ENTRY_STATE,
>> + __IFLA_BRIDGE_MST_ENTRY_MAX,
>> +};
>> +#define IFLA_BRIDGE_MST_ENTRY_MAX (__IFLA_BRIDGE_MST_ENTRY_MAX - 1)
>> +
>> struct bridge_stp_xstats {
>> __u64 transition_blk;
>> __u64 transition_fwd;
>> @@ -786,4 +802,5 @@ enum {
>> __BRIDGE_QUERIER_MAX
>> };
>> #define BRIDGE_QUERIER_MAX (__BRIDGE_QUERIER_MAX - 1)
>> +
>
> stray new line
Well that's embarrassing :)
>> #endif /* _UAPI_LINUX_IF_BRIDGE_H */
>> diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h
>> index 51530aade46e..83849a37db5b 100644
>> --- a/include/uapi/linux/rtnetlink.h
>> +++ b/include/uapi/linux/rtnetlink.h
>> @@ -817,6 +817,7 @@ enum {
>> #define RTEXT_FILTER_MRP (1 << 4)
>> #define RTEXT_FILTER_CFM_CONFIG (1 << 5)
>> #define RTEXT_FILTER_CFM_STATUS (1 << 6)
>> +#define RTEXT_FILTER_MST (1 << 7)
>>
>> /* End of information exported to user level */
>>
>> diff --git a/net/bridge/br_mst.c b/net/bridge/br_mst.c
>> index 78ef5fea4d2b..df65aa7701c1 100644
>> --- a/net/bridge/br_mst.c
>> +++ b/net/bridge/br_mst.c
>> @@ -124,3 +124,108 @@ int br_mst_set_enabled(struct net_bridge *br, bool on,
>> br_opt_toggle(br, BROPT_MST_ENABLED, on);
>> return 0;
>> }
>> +
>> +int br_mst_fill_info(struct sk_buff *skb, struct net_bridge_vlan_group *vg)
>
> const vg
>
>> +{
>> + struct net_bridge_vlan *v;
>
> const v
>
>> + struct nlattr *nest;
>> + unsigned long *seen;
>> + int err = 0;
>> +
>> + seen = bitmap_zalloc(VLAN_N_VID, 0);
>> + if (!seen)
>> + return -ENOMEM;
>> +
>> + list_for_each_entry(v, &vg->vlan_list, vlist) {
>> + if (test_bit(v->brvlan->msti, seen))
>> + continue;
>> +
>> + nest = nla_nest_start_noflag(skb, IFLA_BRIDGE_MST_ENTRY);
>> + if (!nest ||
>> + nla_put_u16(skb, IFLA_BRIDGE_MST_ENTRY_MSTI, v->brvlan->msti) ||
>> + nla_put_u8(skb, IFLA_BRIDGE_MST_ENTRY_STATE, v->state)) {
>> + err = -EMSGSIZE;
>> + break;
>> + }
>> + nla_nest_end(skb, nest);
>> +
>> + set_bit(v->brvlan->msti, seen);
>
> __set_bit()
>
>> + }
>> +
>> + kfree(seen);
>> + return err;
>> +}
>> +
>> +static const struct nla_policy br_mst_nl_policy[IFLA_BRIDGE_MST_ENTRY_MAX + 1] = {
>> + [IFLA_BRIDGE_MST_ENTRY_MSTI] = NLA_POLICY_RANGE(NLA_U16,
>> + 1, /* 0 reserved for CST */
>> + VLAN_N_VID - 1),
>> + [IFLA_BRIDGE_MST_ENTRY_STATE] = NLA_POLICY_RANGE(NLA_U8,
>> + BR_STATE_DISABLED,
>> + BR_STATE_BLOCKING),
>> +};
>> +
>> +static int br_mst_parse_one(struct net_bridge_port *p,
>> + const struct nlattr *attr,
>> + struct netlink_ext_ack *extack)
>> +{
>
> I'd either set the state after parsing, so this function just does what it
> says (parse) or I'd rename it.
>
>> + struct nlattr *tb[IFLA_BRIDGE_MST_ENTRY_MAX + 1];
>> + u16 msti;
>> + u8 state;
>> + int err;
>> +
>> + err = nla_parse_nested(tb, IFLA_BRIDGE_MST_ENTRY_MAX, attr,
>> + br_mst_nl_policy, extack);
>> + if (err)
>> + return err;
>> +
>> + if (!tb[IFLA_BRIDGE_MST_ENTRY_MSTI]) {
>> + NL_SET_ERR_MSG_MOD(extack, "MSTI not specified");
>> + return -EINVAL;
>> + }
>> +
>> + if (!tb[IFLA_BRIDGE_MST_ENTRY_STATE]) {
>> + NL_SET_ERR_MSG_MOD(extack, "State not specified");
>> + return -EINVAL;
>> + }
>> +
>> + msti = nla_get_u16(tb[IFLA_BRIDGE_MST_ENTRY_MSTI]);
>> + state = nla_get_u8(tb[IFLA_BRIDGE_MST_ENTRY_STATE]);
>> +
>> + br_mst_set_state(p, msti, state);
>> + return 0;
>> +}
>> +
>> +int br_mst_parse(struct net_bridge_port *p, struct nlattr *mst_attr,
>> + struct netlink_ext_ack *extack)
>
> This doesn't just parse though, it also sets the state. Please rename it to
> something more appropriate.
>
> const mst_attr
>
>> +{
>> + struct nlattr *attr;
>> + int err, msts = 0;
>> + int rem;
>> +
>> + if (!br_opt_get(p->br, BROPT_MST_ENABLED)) {
>> + NL_SET_ERR_MSG_MOD(extack, "Can't modify MST state when MST is disabled");
>> + return -EBUSY;
>> + }
>> +
>> + nla_for_each_nested(attr, mst_attr, rem) {
>> + switch (nla_type(attr)) {
>> + case IFLA_BRIDGE_MST_ENTRY:
>> + err = br_mst_parse_one(p, attr, extack);
>> + break;
>> + default:
>> + continue;
>> + }
>> +
>> + msts++;
>> + if (err)
>> + break;
>> + }
>> +
>> + if (!msts) {
>> + NL_SET_ERR_MSG_MOD(extack, "Found no MST entries to process");
>> + err = -EINVAL;
>> + }
>> +
>> + return err;
>> +}
>> diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
>> index 7d4432ca9a20..d2b4550f30d6 100644
>> --- a/net/bridge/br_netlink.c
>> +++ b/net/bridge/br_netlink.c
>> @@ -485,7 +485,8 @@ static int br_fill_ifinfo(struct sk_buff *skb,
>> RTEXT_FILTER_BRVLAN_COMPRESSED |
>> RTEXT_FILTER_MRP |
>> RTEXT_FILTER_CFM_CONFIG |
>> - RTEXT_FILTER_CFM_STATUS)) {
>> + RTEXT_FILTER_CFM_STATUS |
>> + RTEXT_FILTER_MST)) {
>> af = nla_nest_start_noflag(skb, IFLA_AF_SPEC);
>> if (!af)
>> goto nla_put_failure;
>> @@ -564,7 +565,28 @@ static int br_fill_ifinfo(struct sk_buff *skb,
>> nla_nest_end(skb, cfm_nest);
>> }
>>
>> + if ((filter_mask & RTEXT_FILTER_MST) &&
>> + br_opt_get(br, BROPT_MST_ENABLED) && port) {
>> + struct net_bridge_vlan_group *vg = nbp_vlan_group(port);
>
> const vg
>
>> + struct nlattr *mst_nest;
>> + int err;
>> +
>> + if (!vg || !vg->num_vlans)
>> + goto done;
>> +
>> + mst_nest = nla_nest_start(skb, IFLA_BRIDGE_MST);
>> + if (!mst_nest)
>> + goto nla_put_failure;
>> +
>> + err = br_mst_fill_info(skb, vg);
>> + if (err)
>> + goto nla_put_failure;
>> +
>> + nla_nest_end(skb, mst_nest);
>> + }
>> +
>
> I think you should also update br_get_link_af_size_filtered() to account for the
> new dump attributes based on the filter. I'd adjust vinfo_sz based on the filter
> flag.
>
>> done:
>> +
>> if (af)
>> nla_nest_end(skb, af);
>> nlmsg_end(skb, nlh);
>> @@ -803,6 +825,14 @@ static int br_afspec(struct net_bridge *br,
>> if (err)
>> return err;
>> break;
>> + case IFLA_BRIDGE_MST:
>> + if (cmd != RTM_SETLINK || !p)
>> + return -EINVAL;
>
> These are two different errors, please set extack appropriately
> for each error.
Thanks for the review, all of the above will be fixed in v4.
Powered by blists - more mailing lists