| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20220314110831.GN618915@linux.vnet.ibm.com>
Date: Mon, 14 Mar 2022 16:38:31 +0530
From: Srikar Dronamraju <srikar@...ux.vnet.ibm.com>
To: K Prateek Nayak <kprateek.nayak@....com>
Cc: peterz@...radead.org, aubrey.li@...ux.intel.com, efault@....de,
gautham.shenoy@....com, linux-kernel@...r.kernel.org,
mgorman@...hsingularity.net, mingo@...nel.org,
song.bao.hua@...ilicon.com, valentin.schneider@....com,
vincent.guittot@...aro.org
Subject: Re: [PATCH v6] sched/fair: Consider cpu affinity when allowing NUMA
imbalance in find_idlest_group
* K Prateek Nayak <kprateek.nayak@....com> [2022-03-08 12:07:49]:
> In the case of systems containing multiple LLCs per socket, like
> AMD Zen systems, users want to spread bandwidth hungry applications
> across multiple LLCs. Stream is one such representative workload where
> the best performance is obtained by limiting one stream thread per LLC.
> To ensure this, users are known to pin the tasks to a specify a subset
> of the CPUs consisting of one CPU per LLC while running such bandwidth
> hungry tasks.
>
> Suppose we kickstart a multi-threaded task like stream with 8 threads
> using taskset or numactl to run on a subset of CPUs on a 2 socket Zen3
> server where each socket contains 128 CPUs
> (0-63,128-191 in one socket, 64-127,192-255 in another socket)
>
> Eg: numactl -C 0,16,32,48,64,80,96,112 ./stream8
>
> Here each CPU in the list is from a different LLC and 4 of those LLCs
> are on one socket, while the other 4 are on another socket.
>
> Ideally we would prefer that each stream thread runs on a different
> CPU from the allowed list of CPUs. However, the current heuristics in
> find_idlest_group() do not allow this during the initial placement.
>
> Suppose the first socket (0-63,128-191) is our local group from which
> we are kickstarting the stream tasks. The first four stream threads
> will be placed in this socket. When it comes to placing the 5th
> thread, all the allowed CPUs are from the local group (0,16,32,48)
> would have been taken.
>
> However, the current scheduler code simply checks if the number of
> tasks in the local group is fewer than the allowed numa-imbalance
> threshold. This threshold was previously 25% of the NUMA domain span
> (in this case threshold = 32) but after the v6 of Mel's patchset
> "Adjust NUMA imbalance for multiple LLCs", got merged in sched-tip,
> Commit: e496132ebedd ("sched/fair: Adjust the allowed NUMA imbalance
> when SD_NUMA spans multiple LLCs") it is now equal to number of LLCs
> in the NUMA domain, for processors with multiple LLCs.
> (in this case threshold = 8).
>
> For this example, the number of tasks will always be within threshold
> and thus all the 8 stream threads will be woken up on the first socket
> thereby resulting in sub-optimal performance.
>
> The following sched_wakeup_new tracepoint output shows the initial
> placement of tasks in the current tip/sched/core on the Zen3 machine:
>
> stream-5045 [032] d..2. 167.914699: sched_wakeup_new: comm=stream pid=5047 prio=120 target_cpu=048
> stream-5045 [032] d..2. 167.914746: sched_wakeup_new: comm=stream pid=5048 prio=120 target_cpu=000
> stream-5045 [032] d..2. 167.914846: sched_wakeup_new: comm=stream pid=5049 prio=120 target_cpu=016
> stream-5045 [032] d..2. 167.914891: sched_wakeup_new: comm=stream pid=5050 prio=120 target_cpu=032
> stream-5045 [032] d..2. 167.914928: sched_wakeup_new: comm=stream pid=5051 prio=120 target_cpu=032
> stream-5045 [032] d..2. 167.914976: sched_wakeup_new: comm=stream pid=5052 prio=120 target_cpu=032
> stream-5045 [032] d..2. 167.915011: sched_wakeup_new: comm=stream pid=5053 prio=120 target_cpu=032
>
> Once the first four threads are distributed among the allowed CPUs of
> socket one, the rest of the treads start piling on these same CPUs
> when clearly there are CPUs on the second socket that can be used.
>
> Following the initial pile up on a small number of CPUs, though the
> load-balancer eventually kicks in, it takes a while to get to {4}{4}
> and even {4}{4} isn't stable as we observe a bunch of ping ponging
> between {4}{4} to {5}{3} and back before a stable state is reached
> much later (1 Stream thread per allowed CPU) and no more migration is
> required.
>
> We can detect this piling and avoid it by checking if the number of
> allowed CPUs in the local group are fewer than the number of tasks
> running in the local group and use this information to spread the
> 5th task out into the next socket (after all, the goal in this
> slowpath is to find the idlest group and the idlest CPU during the
> initial placement!).
>
> The following sched_wakeup_new tracepoint output shows the initial
> placement of tasks after adding this fix on the Zen3 machine:
>
> stream-4733 [032] d..2. 116.017980: sched_wakeup_new: comm=stream pid=4735 prio=120 target_cpu=048
> stream-4733 [032] d..2. 116.018032: sched_wakeup_new: comm=stream pid=4736 prio=120 target_cpu=000
> stream-4733 [032] d..2. 116.018127: sched_wakeup_new: comm=stream pid=4737 prio=120 target_cpu=064
> stream-4733 [032] d..2. 116.018185: sched_wakeup_new: comm=stream pid=4738 prio=120 target_cpu=112
> stream-4733 [032] d..2. 116.018235: sched_wakeup_new: comm=stream pid=4739 prio=120 target_cpu=096
> stream-4733 [032] d..2. 116.018289: sched_wakeup_new: comm=stream pid=4740 prio=120 target_cpu=016
> stream-4733 [032] d..2. 116.018334: sched_wakeup_new: comm=stream pid=4741 prio=120 target_cpu=080
>
> We see that threads are using all of the allowed CPUs and there is
> no pileup.
>
> No output is generated for tracepoint sched_migrate_task with this
> patch due to a perfect initial placement which removes the need
> for balancing later on - both across NUMA boundaries and within
> NUMA boundaries for stream.
>
> Following are the results from running 8 Stream threads with and
> without pinning on a dual socket Zen3 Machine (2 x 64C/128T):
>
> Pinning is done using: numactl -C 0,16,32,48,64,80,96,112 ./stream8
>
> 5.17.0-rc1 5.17.0-rc1 5.17.0-rc1
> tip sched/core tip sched/core tip sched/core
> (no pinning) +pinning + this-patch
> + pinning
>
> Copy: 97699.28 (0.00 pct) 95933.60 (-1.80 pct) 156578.91 (60.26 pct)
> Scale: 107754.15 (0.00 pct) 91869.88 (-14.74 pct) 149783.25 (39.00 pct)
> Add: 126383.29 (0.00 pct) 105730.86 (-16.34 pct) 186493.09 (47.56 pct)
> Triad: 124896.78 (0.00 pct) 106394.38 (-14.81 pct) 184733.48 (47.90 pct)
>
> Pinning currently hurts the performance compared to unbound case on
> tip/sched/core. With the addition of this patch, we are able to
> outperform tip/sched/core by a good margin with pinning.
>
> Following are the results from running 16 Stream threads with and
> without pinning on a dual socket Skylake Machine (2 x 24C/48T):
>
> Pinning is done using: numactl -C 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 ./stream16
>
> 5.17.0-rc1 5.17.0-rc1 5.17.0-rc1
> tip sched/core tip sched/core tip sched/core
> (no pinning) +pinning + this-patch
> + pinning
>
> Copy: 126620.67 (0.00 pct) 141062.10 (11.40 pct) 147615.44 (16.58 pct)
> Scale: 91313.51 (0.00 pct) 112879.61 (23.61 pct) 122591.28 (34.25 pct)
> Add: 102035.43 (0.00 pct) 125889.98 (23.37 pct) 138179.01 (35.42 pct)
> Triad: 102281.91 (0.00 pct) 123743.48 (20.98 pct) 138940.41 (35.84 pct)
>
> In case of Skylake machine, with single LLC per socket, we see good
> improvement brought about by pinning which is further benefited by
> this patch.
>
> Signed-off-by: K Prateek Nayak <kprateek.nayak@....com>
> Acked-by: Mel Gorman <mgorman@...hsingularity.net>
Looks good to me.
Reviewed-by: Srikar Dronamraju <srikar@...ux.vnet.ibm.com>
> ---
> Changelog v5-->v6:
> - Move the cpumask variable declaration to the block it is
> used in.
> - Collect tags from v5.
> Changelog v4-->v5:
> - Only perform cpumask operations if nr_cpus_allowed is not
> equal to num_online_cpus based on Mel's suggestion.
> ---
> kernel/sched/fair.c | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
> index 16874e112fe6..6cc90d76250f 100644
> --- a/kernel/sched/fair.c
> +++ b/kernel/sched/fair.c
> @@ -9183,6 +9183,7 @@ find_idlest_group(struct sched_domain *sd, struct task_struct *p, int this_cpu)
>
> case group_has_spare:
> if (sd->flags & SD_NUMA) {
> + int imb;
> #ifdef CONFIG_NUMA_BALANCING
> int idlest_cpu;
> /*
> @@ -9200,10 +9201,19 @@ find_idlest_group(struct sched_domain *sd, struct task_struct *p, int this_cpu)
> * Otherwise, keep the task close to the wakeup source
> * and improve locality if the number of running tasks
> * would remain below threshold where an imbalance is
> - * allowed. If there is a real need of migration,
> - * periodic load balance will take care of it.
> + * allowed while accounting for the possibility the
> + * task is pinned to a subset of CPUs. If there is a
> + * real need of migration, periodic load balance will
> + * take care of it.
> */
> - if (allow_numa_imbalance(local_sgs.sum_nr_running + 1, sd->imb_numa_nr))
> + imb = sd->imb_numa_nr;
> + if (p->nr_cpus_allowed != num_online_cpus()) {
> + struct cpumask *cpus = this_cpu_cpumask_var_ptr(select_idle_mask);
> +
> + cpumask_and(cpus, sched_group_span(local), p->cpus_ptr);
> + imb = min(cpumask_weight(cpus), sd->imb_numa_nr);
> + }
> + if (allow_numa_imbalance(local_sgs.sum_nr_running + 1, imb))
> return NULL;
> }
>
> --
> 2.25.1
>
--
Thanks and Regards
Srikar Dronamraju
Powered by blists - more mailing lists