Message-ID: <Yi+aTs4ufnxHXg4r@google.com>
Date:   Mon, 14 Mar 2022 19:41:02 +0000
From:   Oliver Upton <oupton@...gle.com>
To:     Raghavendra Rao Ananta <rananta@...gle.com>
Cc:     Marc Zyngier <maz@...nel.org>, Andrew Jones <drjones@...hat.com>,
        James Morse <james.morse@....com>,
        Alexandru Elisei <alexandru.elisei@....com>,
        Suzuki K Poulose <suzuki.poulose@....com>,
        Paolo Bonzini <pbonzini@...hat.com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will@...nel.org>, Peter Shier <pshier@...gle.com>,
        Ricardo Koller <ricarkol@...gle.com>,
        Reiji Watanabe <reijiw@...gle.com>,
        Jing Zhang <jingzhangos@...gle.com>,
        linux-arm-kernel@...ts.infradead.org, kvmarm@...ts.cs.columbia.edu,
        linux-kernel@...r.kernel.org, kvm@...r.kernel.org
Subject: Re: [PATCH v4 05/13] KVM: arm64: Setup a framework for hypercall
 bitmap firmware registers

On Thu, Feb 24, 2022 at 05:25:51PM +0000, Raghavendra Rao Ananta wrote:
> KVM regularly introduces new hypercall services to the guests without
> any consent from the userspace. This means, the guests can observe
> hypercall services in and out as they migrate across various host
> kernel versions. This could be a major problem if the guest
> discovered a hypercall, started using it, and after getting migrated
> to an older kernel realizes that it's no longer available. Depending
> on how the guest handles the change, there's a potential chance that
> the guest would just panic.
> 
> As a result, there's a need for the userspace to elect the services
> that it wishes the guest to discover. It can elect these services
> based on the kernels spread across its (migration) fleet. To remedy
> this, extend the existing firmware psuedo-registers, such as
> KVM_REG_ARM_PSCI_VERSION, for all the hypercall services available.
> 
> These firmware registers are categorized based on the service call
> owners, and unlike the existing firmware psuedo-registers, they hold
> the features supported in the form of a bitmap.
> 
> During the VM initialization, the registers holds an upper-limit of
> the features supported by the corresponding registers. It's expected
> that the VMMs discover the features provided by each register via
> GET_ONE_REG, and writeback the desired values using SET_ONE_REG.
> KVM allows this modification only until the VM has started.
> 
> Older userspace code can simply ignore the capability and the
> hypercall services will be exposed unconditionally to the guests, thus
> ensuring backward compatibility.
> 
> In this patch, the framework adds the register only for ARM's standard
> secure services (owner value 4). Currently, this includes support only
> for ARM True Random Number Generator (TRNG) service, with bit-0 of the
> register representing mandatory features of v1.0. The register is also
> added to the kvm_arm_vm_scope_fw_regs[] list as it maintains its state
> per-VM. Other services are momentarily added in the upcoming patches.
> 
> Signed-off-by: Raghavendra Rao Ananta <rananta@...gle.com>
> ---
>  arch/arm64/include/asm/kvm_host.h | 12 +++++
>  arch/arm64/include/uapi/asm/kvm.h |  8 ++++
>  arch/arm64/kvm/arm.c              |  8 ++++
>  arch/arm64/kvm/guest.c            |  1 +
>  arch/arm64/kvm/hypercalls.c       | 78 +++++++++++++++++++++++++++++++
>  include/kvm/arm_hypercalls.h      |  4 ++
>  6 files changed, 111 insertions(+)
> 
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index e823571e50cc..1909ced3208f 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -101,6 +101,15 @@ struct kvm_s2_mmu {
>  struct kvm_arch_memory_slot {
>  };
>  
> +/**
> + * struct kvm_hvc_desc: KVM ARM64 hypercall descriptor
> + *
> + * @hvc_std_bmap: Bitmap of standard secure service calls
> + */
> +struct kvm_hvc_desc {

nit: maybe call this structure kvm_hypercall_features? When nested comes
along guests will need to use the SVC conduit as HVC traps are always
taken to EL2. Same will need to be true for virtual EL2.

> +	u64 hvc_std_bmap;
> +};
> +
>  struct kvm_arch {
>  	struct kvm_s2_mmu mmu;
>  
> @@ -142,6 +151,9 @@ struct kvm_arch {
>  
>  	/* Capture first run of the VM */
>  	bool has_run_once;
> +
> +	/* Hypercall firmware register' descriptor */
> +	struct kvm_hvc_desc hvc_desc;
>  };
>  
>  struct kvm_vcpu_fault_info {
> diff --git a/arch/arm64/include/uapi/asm/kvm.h b/arch/arm64/include/uapi/asm/kvm.h
> index c35447cc0e0c..2decc30d6b84 100644
> --- a/arch/arm64/include/uapi/asm/kvm.h
> +++ b/arch/arm64/include/uapi/asm/kvm.h
> @@ -287,6 +287,14 @@ struct kvm_arm_copy_mte_tags {
>  #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED	3
>  #define KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_ENABLED     	(1U << 4)
>  
> +/* Bitmap firmware registers, extension to the existing psuedo-register space */
> +#define KVM_REG_ARM_FW_BMAP			KVM_REG_ARM_FW_REG(0xff00)

What is the motivation for moving the bitmap register indices so far
away from the rest of the firmware regs?

> +#define KVM_REG_ARM_FW_BMAP_REG(r)		(KVM_REG_ARM_FW_BMAP | (r))

If you are still going to use the index offset, just pass 'r' through to
the other macro:

  #define KVM_REG_ARM_FW_BMAP_REG(r) 		KVM_REG_ARM_FW_REG(0xff00 + r)

> +#define KVM_REG_ARM_STD_BMAP			KVM_REG_ARM_FW_BMAP_REG(0)
> +#define KVM_REG_ARM_STD_BIT_TRNG_V1_0		BIT(0)
> +#define KVM_REG_ARM_STD_BMAP_BIT_MAX		0       /* Last valid bit */

Implementation details such as this probably shouldn't live in UAPI
headers. We'll likely need to bump the value in the future.

> +
>  /* SVE registers */
>  #define KVM_REG_ARM64_SVE		(0x15 << KVM_REG_ARM_COPROC_SHIFT)
>  
> diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
> index f61cd8d57eae..e9f9edb1cf55 100644
> --- a/arch/arm64/kvm/arm.c
> +++ b/arch/arm64/kvm/arm.c
> @@ -156,6 +156,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
>  	kvm->arch.max_vcpus = kvm_arm_default_max_vcpus();
>  
>  	set_default_spectre(kvm);
> +	kvm_arm_init_hypercalls(kvm);
>  
>  	return ret;
>  out_free_stage2_pgd:
> @@ -635,7 +636,14 @@ int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu)
>  	if (kvm_vm_is_protected(kvm))
>  		kvm_call_hyp_nvhe(__pkvm_vcpu_init_traps, vcpu);
>  
> +	/*
> +	 * Grab kvm->lock such that the reader of has_run_once can finish
> +	 * the necessary operation atomically, such as deciding whether to
> +	 * block the writes to the firmware registers if the VM has run once.
> +	 */
> +	mutex_lock(&kvm->lock);
>  	kvm->arch.has_run_once = true;
> +	mutex_unlock(&kvm->lock);

Shouldn't this have just grabbed the kvm lock in patch 04/13?

>  	return ret;
>  }
> diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
> index eb061e64a7a5..d66e6c742bbe 100644
> --- a/arch/arm64/kvm/guest.c
> +++ b/arch/arm64/kvm/guest.c
> @@ -65,6 +65,7 @@ const struct kvm_stats_header kvm_vcpu_stats_header = {
>  static const u64 kvm_arm_vm_scope_fw_regs[] = {
>  	KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1,
>  	KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2,
> +	KVM_REG_ARM_STD_BMAP,
>  };
>  
>  /**
> diff --git a/arch/arm64/kvm/hypercalls.c b/arch/arm64/kvm/hypercalls.c
> index 8624e6964940..48c126c3da72 100644
> --- a/arch/arm64/kvm/hypercalls.c
> +++ b/arch/arm64/kvm/hypercalls.c
> @@ -58,6 +58,29 @@ static void kvm_ptp_get_time(struct kvm_vcpu *vcpu, u64 *val)
>  	val[3] = lower_32_bits(cycles);
>  }
>  
> +static bool kvm_arm_fw_reg_feat_enabled(u64 reg_bmap, u64 feat_bit)
> +{
> +	return reg_bmap & feat_bit;
> +}
> +
> +static bool kvm_hvc_call_supported(struct kvm_vcpu *vcpu, u32 func_id)
> +{
> +	struct kvm_hvc_desc *hvc_desc = &vcpu->kvm->arch.hvc_desc;
> +
> +	switch (func_id) {
> +	case ARM_SMCCC_TRNG_VERSION:
> +	case ARM_SMCCC_TRNG_FEATURES:
> +	case ARM_SMCCC_TRNG_GET_UUID:
> +	case ARM_SMCCC_TRNG_RND32:
> +	case ARM_SMCCC_TRNG_RND64:
> +		return kvm_arm_fw_reg_feat_enabled(hvc_desc->hvc_std_bmap,
> +						KVM_REG_ARM_STD_BIT_TRNG_V1_0);
> +	default:
> +		/* By default, allow the services that aren't listed here */
> +		return true;

I think your default case should really return false. It keeps people
honest when they add new patches to set up a new hypercall bit (no bit?
no call!)

That of course requires that you only return false once all of the
preexisting hypercalls are enumerated, otherwise such a patch would
cause a regression in isolation.

> +	}
> +}
> +
>  int kvm_hvc_call_handler(struct kvm_vcpu *vcpu)
>  {
>  	u32 func_id = smccc_get_function(vcpu);
> @@ -65,6 +88,9 @@ int kvm_hvc_call_handler(struct kvm_vcpu *vcpu)
>  	u32 feature;
>  	gpa_t gpa;
>  
> +	if (!kvm_hvc_call_supported(vcpu, func_id))
> +		goto out;
> +
>  	switch (func_id) {
>  	case ARM_SMCCC_VERSION_FUNC_ID:
>  		val[0] = ARM_SMCCC_VERSION_1_1;
> @@ -143,6 +169,7 @@ int kvm_hvc_call_handler(struct kvm_vcpu *vcpu)
>  		return kvm_psci_call(vcpu);
>  	}
>  
> +out:
>  	smccc_set_retval(vcpu, val[0], val[1], val[2], val[3]);
>  	return 1;
>  }
> @@ -151,8 +178,16 @@ static const u64 kvm_arm_fw_reg_ids[] = {
>  	KVM_REG_ARM_PSCI_VERSION,
>  	KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_1,
>  	KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2,
> +	KVM_REG_ARM_STD_BMAP,
>  };
>  
> +void kvm_arm_init_hypercalls(struct kvm *kvm)
> +{
> +	struct kvm_hvc_desc *hvc_desc = &kvm->arch.hvc_desc;
> +
> +	hvc_desc->hvc_std_bmap = ARM_SMCCC_STD_FEATURES;
> +}
> +
>  int kvm_arm_get_fw_num_regs(struct kvm_vcpu *vcpu)
>  {
>  	return ARRAY_SIZE(kvm_arm_fw_reg_ids);
> @@ -220,6 +255,7 @@ static int get_kernel_wa_level(u64 regid)
>  
>  int kvm_arm_get_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
>  {
> +	struct kvm_hvc_desc *hvc_desc = &vcpu->kvm->arch.hvc_desc;
>  	void __user *uaddr = (void __user *)(long)reg->addr;
>  	u64 val, reg_id = reg->id;
>  
> @@ -233,6 +269,9 @@ int kvm_arm_get_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
>  	case KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2:
>  		val = get_kernel_wa_level(reg_id) & KVM_REG_FEATURE_LEVEL_MASK;
>  		break;
> +	case KVM_REG_ARM_STD_BMAP:
> +		val = READ_ONCE(hvc_desc->hvc_std_bmap);
> +		break;
>  	default:
>  		return -ENOENT;
>  	}
> @@ -243,6 +282,43 @@ int kvm_arm_get_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
>  	return 0;
>  }
>  
> +static int kvm_arm_set_fw_reg_bmap(struct kvm_vcpu *vcpu, u64 reg_id, u64 val)
> +{
> +	int ret = 0;
> +	struct kvm *kvm = vcpu->kvm;
> +	struct kvm_hvc_desc *hvc_desc = &kvm->arch.hvc_desc;
> +	u64 *fw_reg_bmap, fw_reg_features;

nit: use reverse fir tree ordering for locals (longest line first,
shortest last).

> +	switch (reg_id) {
> +	case KVM_REG_ARM_STD_BMAP:
> +		fw_reg_bmap = &hvc_desc->hvc_std_bmap;
> +		fw_reg_features = ARM_SMCCC_STD_FEATURES;
> +		break;
> +	default:
> +		return -ENOENT;
> +	}
> +
> +	/* Check for unsupported bit */
> +	if (val & ~fw_reg_features)
> +		return -EINVAL;
> +
> +	mutex_lock(&kvm->lock);
> +
> +	/*
> +	 * If the VM (any vCPU) has already started running, return success
> +	 * if there's no change in the value. Else, return -EBUSY.

How about returning -EINVAL instead? We already do this for
KVM_ARM_VCPU_INIT if userspace uses a different target than the one
previously set.

> +	 */
> +	if (kvm_arm_vm_has_run_once(&kvm->arch)) {
> +		ret = *fw_reg_bmap != val ? -EBUSY : 0;
> +		goto out;
> +	}
> +
> +	WRITE_ONCE(*fw_reg_bmap, val);
> +out:
> +	mutex_unlock(&kvm->lock);
> +	return ret;
> +}
> +
>  int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
>  {
>  	void __user *uaddr = (void __user *)(long)reg->addr;
> @@ -321,6 +397,8 @@ int kvm_arm_set_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
>  			return -EINVAL;
>  
>  		return 0;
> +	case KVM_REG_ARM_STD_BMAP:
> +		return kvm_arm_set_fw_reg_bmap(vcpu, reg_id, val);
>  	default:
>  		return -ENOENT;
>  	}
> diff --git a/include/kvm/arm_hypercalls.h b/include/kvm/arm_hypercalls.h
> index 5d38628a8d04..64d30b452809 100644
> --- a/include/kvm/arm_hypercalls.h
> +++ b/include/kvm/arm_hypercalls.h
> @@ -6,6 +6,9 @@
>  
>  #include <asm/kvm_emulate.h>
>  
> +#define ARM_SMCCC_STD_FEATURES \
> +	GENMASK_ULL(KVM_REG_ARM_STD_BMAP_BIT_MAX, 0)
> +

This probably needs KVM_ somewhere in its name for the sake of scoping.

>  int kvm_hvc_call_handler(struct kvm_vcpu *vcpu);
>  
>  static inline u32 smccc_get_function(struct kvm_vcpu *vcpu)
> @@ -42,6 +45,7 @@ static inline void smccc_set_retval(struct kvm_vcpu *vcpu,
>  
>  struct kvm_one_reg;
>  
> +void kvm_arm_init_hypercalls(struct kvm *kvm);
>  int kvm_arm_get_fw_num_regs(struct kvm_vcpu *vcpu);
>  int kvm_arm_copy_fw_reg_indices(struct kvm_vcpu *vcpu, u64 __user *uindices);
>  int kvm_arm_get_fw_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg);
> -- 
> 2.35.1.473.g83b2b277ed-goog
> 

Powered by blists - more mailing lists