linux-kernel - [PATCH RESEND] mmc: mmci: manage MMC_PM_KEEP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Mon, 14 Mar 2022 10:52:25 +0100
From:   Yann Gautier <yann.gautier@...s.st.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>
CC:     <linux-kernel@...r.kernel.org>, <linux-mmc@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        Christophe Kerello <christophe.kerello@...s.st.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Ludovic Barre <ludovic.barre@...s.st.com>,
        Philipp Zabel <p.zabel@...gutronix.de>,
        Russell King <linux@...linux.org.uk>,
        Marek Vasut <marex@...x.de>, <kernel@...electronics.com>,
        Manivannan Sadhasivam <mani@...nel.org>,
        Grzegorz Szymaszek <gszymaszek@...rt.pl>,
        Yann Gautier <yann.gautier@...s.st.com>
Subject: [PATCH RESEND] mmc: mmci: manage MMC_PM_KEEP_POWER per variant config

Add a disable_keep_power field in variant_data struct. The
MMC_PM_KEEP_POWER flag will be enabled if disable_keep_power is not set.
It is only set to true for stm32_sdmmc variants.

The issue was seen on STM32MP157C-DK2 board, which embeds a wifi chip.
It doesn't correctly support low power, and we need to unbind the wifi
driver before a suspend sequence. But the wifi chip firmware is then
lost, and the communication with SDIO fails if MMC_PM_KEEP_POWER is
enabled.
The flag can still be enabled through DT property: keep-power-in-suspend.

Signed-off-by: Yann Gautier <yann.gautier@...s.st.com>
---
Resend the patch alone. It was previoulsy in a series [1] for which the
other patches will be reworked.

[1] https://lore.kernel.org/lkml/20220304135134.47827-1-yann.gautier@foss.st.com/

 drivers/mmc/host/mmci.c | 5 ++++-
 drivers/mmc/host/mmci.h | 1 +
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 45b8608c935c..0e2f2f5d6a52 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -274,6 +274,7 @@ static struct variant_data variant_stm32_sdmmc = {
 	.busy_detect		= true,
 	.busy_detect_flag	= MCI_STM32_BUSYD0,
 	.busy_detect_mask	= MCI_STM32_BUSYD0ENDMASK,
+	.disable_keep_power	= true,
 	.init			= sdmmc_variant_init,
 };
 
@@ -301,6 +302,7 @@ static struct variant_data variant_stm32_sdmmcv2 = {
 	.busy_detect		= true,
 	.busy_detect_flag	= MCI_STM32_BUSYD0,
 	.busy_detect_mask	= MCI_STM32_BUSYD0ENDMASK,
+	.disable_keep_power	= true,
 	.init			= sdmmc_variant_init,
 };
 
@@ -2172,7 +2174,8 @@ static int mmci_probe(struct amba_device *dev,
 	host->stop_abort.flags = MMC_RSP_R1B | MMC_CMD_AC;
 
 	/* We support these PM capabilities. */
-	mmc->pm_caps |= MMC_PM_KEEP_POWER;
+	if (!variant->disable_keep_power)
+		mmc->pm_caps |= MMC_PM_KEEP_POWER;
 
 	/*
 	 * We can do SGIO
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index e1a9b96a3396..2cad1ef9766a 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -361,6 +361,7 @@ struct variant_data {
 	u32			opendrain;
 	u8			dma_lli:1;
 	u32			stm32_idmabsize_mask;
+	u8			disable_keep_power:1;
 	void (*init)(struct mmci_host *host);
 };
 
-- 
2.25.1