linux-kernel - [PATCH 5.15 023/110] smsc95xx: Ignore -ENODEV errors when device is unplugged

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20220314112743.683391099@linuxfoundation.org>
Date:   Mon, 14 Mar 2022 12:53:25 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Fabio Estevam <festevam@...x.de>,
        "David S. Miller" <davem@...emloft.net>,
        Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.15 023/110] smsc95xx: Ignore -ENODEV errors when device is unplugged

From: Fabio Estevam <festevam@...x.de>

[ Upstream commit c70c453abcbf3ecbaadd4c3236a5119b8da365cf ]

According to Documentation/driver-api/usb/URB.rst when a device
is unplugged usb_submit_urb() returns -ENODEV.

This error code propagates all the way up to usbnet_read_cmd() and
usbnet_write_cmd() calls inside the smsc95xx.c driver during
Ethernet cable unplug, unbind or reboot.

This causes the following errors to be shown on reboot, for example:

ci_hdrc ci_hdrc.1: remove, state 1
usb usb2: USB disconnect, device number 1
usb 2-1: USB disconnect, device number 2
usb 2-1.1: USB disconnect, device number 3
smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19
smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS
smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy
smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup
usb 2-1.4: USB disconnect, device number 4
ci_hdrc ci_hdrc.1: USB bus 2 deregistered
ci_hdrc ci_hdrc.0: remove, state 4
usb usb1: USB disconnect, device number 1
ci_hdrc ci_hdrc.0: USB bus 1 deregistered
imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot!
reboot: Restarting system

Ignore the -ENODEV errors inside __smsc95xx_mdio_read() and
__smsc95xx_phy_wait_not_busy() and do not print error messages
when -ENODEV is returned.

Fixes: a049a30fc27c ("net: usb: Correct PHY handling of smsc95xx")
Signed-off-by: Fabio Estevam <festevam@...x.de>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/net/usb/smsc95xx.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index 026e7487c45b..eb0d325e92b7 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -84,9 +84,10 @@ static int __must_check __smsc95xx_read_reg(struct usbnet *dev, u32 index,
 	ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN
 		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 0, index, &buf, 4);
-	if (unlikely(ret < 0)) {
-		netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
-			    index, ret);
+	if (ret < 0) {
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n",
+				    index, ret);
 		return ret;
 	}
 
@@ -116,7 +117,7 @@ static int __must_check __smsc95xx_write_reg(struct usbnet *dev, u32 index,
 	ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT
 		 | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
 		 0, index, &buf, 4);
-	if (unlikely(ret < 0))
+	if (ret < 0 && ret != -ENODEV)
 		netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n",
 			    index, ret);
 
@@ -159,6 +160,9 @@ static int __must_check __smsc95xx_phy_wait_not_busy(struct usbnet *dev,
 	do {
 		ret = __smsc95xx_read_reg(dev, MII_ADDR, &val, in_pm);
 		if (ret < 0) {
+			/* Ignore -ENODEV error during disconnect() */
+			if (ret == -ENODEV)
+				return 0;
 			netdev_warn(dev->net, "Error reading MII_ACCESS\n");
 			return ret;
 		}
@@ -194,7 +198,8 @@ static int __smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx,
 	addr = mii_address_cmd(phy_id, idx, MII_READ_ | MII_BUSY_);
 	ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
 	if (ret < 0) {
-		netdev_warn(dev->net, "Error writing MII_ADDR\n");
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Error writing MII_ADDR\n");
 		goto done;
 	}
 
@@ -206,7 +211,8 @@ static int __smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx,
 
 	ret = __smsc95xx_read_reg(dev, MII_DATA, &val, in_pm);
 	if (ret < 0) {
-		netdev_warn(dev->net, "Error reading MII_DATA\n");
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Error reading MII_DATA\n");
 		goto done;
 	}
 
@@ -214,6 +220,10 @@ static int __smsc95xx_mdio_read(struct usbnet *dev, int phy_id, int idx,
 
 done:
 	mutex_unlock(&dev->phy_mutex);
+
+	/* Ignore -ENODEV error during disconnect() */
+	if (ret == -ENODEV)
+		return 0;
 	return ret;
 }
 
@@ -235,7 +245,8 @@ static void __smsc95xx_mdio_write(struct usbnet *dev, int phy_id,
 	val = regval;
 	ret = __smsc95xx_write_reg(dev, MII_DATA, val, in_pm);
 	if (ret < 0) {
-		netdev_warn(dev->net, "Error writing MII_DATA\n");
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Error writing MII_DATA\n");
 		goto done;
 	}
 
@@ -243,7 +254,8 @@ static void __smsc95xx_mdio_write(struct usbnet *dev, int phy_id,
 	addr = mii_address_cmd(phy_id, idx, MII_WRITE_ | MII_BUSY_);
 	ret = __smsc95xx_write_reg(dev, MII_ADDR, addr, in_pm);
 	if (ret < 0) {
-		netdev_warn(dev->net, "Error writing MII_ADDR\n");
+		if (ret != -ENODEV)
+			netdev_warn(dev->net, "Error writing MII_ADDR\n");
 		goto done;
 	}
 
-- 
2.34.1